[PATCH] staging: media: atomisp: pci: Format multi-line comments according to coding-style in file atomisp_cmd.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Format multi-line comments according to the coding-style.
Issue detected by checkpatch.pl.

Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@xxxxxxxxx>
---
 drivers/staging/media/atomisp/pci/atomisp_cmd.c | 109 ++++++++++++++----------
 1 file changed, 65 insertions(+), 44 deletions(-)

diff --git a/drivers/staging/media/atomisp/pci/atomisp_cmd.c b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
index 592ea99..6113785 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_cmd.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
@@ -67,7 +67,8 @@
  * At 15fps this means 133ms. We set the timeout a bit longer.
  * Each flash driver is supposed to set its own timeout, but
  * just in case someone else changed the timeout, we set it
- * here to make sure we don't damage the flash hardware. */
+ * here to make sure we don't damage the flash hardware.
+ */
 #define FLASH_TIMEOUT 800 /* ms */
 
 union host {
@@ -562,7 +563,8 @@ irqreturn_t atomisp_isr(int irq, void *dev)
 			 * and driver needs to keep old sequence_temp value.
 			 * NOTE: There is assumption here that ISP will not
 			 * start processing next frame from sensor before old
-			 * one is completely done. */
+			 * one is completely done.
+			 */
 			if (atomic_read(&asd->sequence) == atomic_read(
 				&asd->sequence_temp))
 				atomic_set(&asd->sequence_temp,
@@ -1247,7 +1249,8 @@ void atomisp_buf_done(struct atomisp_sub_device *asd, int error,
 
 	if (IS_ISP2401) {
 		/* If there are no buffers queued then
-		* delete wdt timer. */
+		 * delete wdt timer.
+		 */
 		if (asd->streaming != ATOMISP_DEVICE_STREAMING_ENABLED)
 			return;
 		if (!atomisp_buffers_queued_pipe(pipe))
@@ -1312,10 +1315,10 @@ static void __atomisp_css_recover(struct atomisp_device *isp, bool isp_timeout)
 			continue;
 
 		/*
-		* AtomISP::waitStageUpdate is blocked when WDT happens.
-		* By calling acc_done() for all loaded fw_handles,
-		* HAL will be unblocked.
-		*/
+		 * AtomISP::waitStageUpdate is blocked when WDT happens.
+		 * By calling acc_done() for all loaded fw_handles,
+		 * HAL will be unblocked.
+		 */
 		acc_pipe = asd->stream_env[i].pipes[IA_CSS_PIPE_ID_ACC];
 		if (acc_pipe) {
 			acc_pipeline = ia_css_pipe_get_pipeline(acc_pipe);
@@ -2350,8 +2353,9 @@ static void atomisp_update_grid_info(struct atomisp_sub_device *asd,
 	if (atomisp_css_get_grid_info(asd, pipe_id, source_pad))
 		return;
 
-	/* We must free all buffers because they no longer match
-	   the grid size. */
+	/* We must free all buffers because
+	 * they no longer match the grid size.
+	 */
 	atomisp_css_free_stat_buffers(asd);
 
 	err = atomisp_alloc_css_stat_bufs(asd, stream_id);
@@ -2364,7 +2368,8 @@ static void atomisp_update_grid_info(struct atomisp_sub_device *asd,
 		/* Failure for 3A buffers does not influence DIS buffers */
 		if (asd->params.s3a_output_bytes != 0) {
 			/* For SOC sensor happens s3a_output_bytes == 0,
-			 * using if condition to exclude false error log */
+			 * using if condition to exclude false error log
+			 */
 			dev_err(isp->dev, "Failed to allocate memory for 3A statistics\n");
 		}
 		goto err;
@@ -2766,9 +2771,10 @@ int atomisp_3a_stat(struct atomisp_sub_device *asd, int flag,
 		return -EINVAL;
 
 	if (atomisp_compare_grid(asd, &config->grid_info) != 0) {
-		/* If the grid info in the argument differs from the current
-		   grid info, we tell the caller to reset the grid size and
-		   try again. */
+		/* If the grid info in the argument differs
+		 * from the current grid info, we tell the
+		 * caller to reset the grid size and try again.
+		 */
 		return -EAGAIN;
 	}
 
@@ -2822,16 +2828,18 @@ int atomisp_get_metadata(struct atomisp_sub_device *asd, int flag,
 	stream_info = &asd->stream_env[ATOMISP_INPUT_STREAM_GENERAL].
 		      stream_info;
 
-	/* We always return the resolution and stride even if there is
-	 * no valid metadata. This allows the caller to get the information
-	 * needed to allocate user-space buffers. */
+	/* We always return the resolution and stride even if there
+	 * is no valid metadata. This allows the caller to get the
+	 * information needed to allocate user-space buffers.
+	 */
 	md->width  = stream_info->metadata_info.resolution.width;
 	md->height = stream_info->metadata_info.resolution.height;
 	md->stride = stream_info->metadata_info.stride;
 
 	/* sanity check to avoid writing into unallocated memory.
 	 * This does not return an error because it is a valid way
-	 * for applications to detect that metadata is not enabled. */
+	 * for applications to detect that metadata is not enabled.
+	 */
 	if (md->width == 0 || md->height == 0 || !md->data)
 		return 0;
 
@@ -2898,16 +2906,18 @@ int atomisp_get_metadata_by_type(struct atomisp_sub_device *asd, int flag,
 	stream_info = &asd->stream_env[ATOMISP_INPUT_STREAM_GENERAL].
 		      stream_info;
 
-	/* We always return the resolution and stride even if there is
-	 * no valid metadata. This allows the caller to get the information
-	 * needed to allocate user-space buffers. */
+	/* We always return the resolution and stride even if there
+	 * is no valid metadata. This allows the caller to get the
+	 * information needed to allocate user-space buffers.
+	 */
 	md->width  = stream_info->metadata_info.resolution.width;
 	md->height = stream_info->metadata_info.resolution.height;
 	md->stride = stream_info->metadata_info.stride;
 
 	/* sanity check to avoid writing into unallocated memory.
 	 * This does not return an error because it is a valid way
-	 * for applications to detect that metadata is not enabled. */
+	 * for applications to detect that metadata is not enabled.
+	 */
 	if (md->width == 0 || md->height == 0 || !md->data)
 		return 0;
 
@@ -3705,9 +3715,10 @@ int atomisp_css_cp_dvs2_coefs(struct atomisp_sub_device *asd,
 		if (sizeof(*cur) != sizeof(coefs->grid) ||
 		    memcmp(&coefs->grid, cur, sizeof(coefs->grid))) {
 			dev_err(asd->isp->dev, "dvs grid mis-match!\n");
-			/* If the grid info in the argument differs from the current
-			grid info, we tell the caller to reset the grid size and
-			try again. */
+			/* If the grid info in the argument differs
+			 * from the current grid info, we tell the
+			 * caller to reset the grid size and try again.
+			 */
 			return -EAGAIN;
 		}
 
@@ -3761,9 +3772,10 @@ int atomisp_css_cp_dvs2_coefs(struct atomisp_sub_device *asd,
 		if (sizeof(*cur) != sizeof(dvs2_coefs.grid) ||
 		    memcmp(&dvs2_coefs.grid, cur, sizeof(dvs2_coefs.grid))) {
 			dev_err(asd->isp->dev, "dvs grid mis-match!\n");
-			/* If the grid info in the argument differs from the current
-			grid info, we tell the caller to reset the grid size and
-			try again. */
+			/* If the grid info in the argument differs
+			 * from the current grid info, we tell the
+			 * caller to reset the grid size and try again.
+			 */
 			return -EAGAIN;
 		}
 
@@ -4184,8 +4196,8 @@ void atomisp_handle_parameter_and_buffer(struct atomisp_video_pipe *pipe)
 }
 
 /*
-* Function to configure ISP parameters
-*/
+ * Function to configure ISP parameters
+ */
 int atomisp_set_parameters(struct video_device *vdev,
 			   struct atomisp_parameters *arg)
 {
@@ -4289,9 +4301,10 @@ int atomisp_param(struct atomisp_sub_device *asd, int flag,
 
 		atomisp_curr_user_grid_info(asd, &config->info);
 
-		/* We always return the resolution and stride even if there is
-		 * no valid metadata. This allows the caller to get the
-		 * information needed to allocate user-space buffers. */
+		/* We always return the resolution and stride even if there
+		 * is no valid metadata. This allows the caller to get the
+		 * information needed to allocate user-space buffers.
+		 */
 		config->metadata_config.metadata_height = asd->
 			stream_env[ATOMISP_INPUT_STREAM_GENERAL].stream_info.
 			metadata_info.resolution.height;
@@ -4561,8 +4574,9 @@ atomisp_bytesperline_to_padded_width(unsigned int bytesperline,
 		return bytesperline / 2;
 	case IA_CSS_FRAME_FORMAT_RGBA888:
 		return bytesperline / 4;
-	/* The following cases could be removed, but we leave them
-	   in to document the formats that are included. */
+	/* The following cases could be removed, but we leave
+	 * them in to document the formats that are included.
+	 */
 	case IA_CSS_FRAME_FORMAT_NV11:
 	case IA_CSS_FRAME_FORMAT_NV12:
 	case IA_CSS_FRAME_FORMAT_NV16:
@@ -4599,8 +4613,9 @@ atomisp_v4l2_framebuffer_to_css_frame(const struct v4l2_framebuffer *arg,
 			   arg->fmt.bytesperline, sh_format);
 
 	/* Note: the padded width on an ia_css_frame is in elements, not in
-	   bytes. The RAW frame we use here should always be a 16bit RAW
-	   frame. This is why we bytesperline/2 is equal to the padded with */
+	 * bytes. The RAW frame we use here should always be a 16bit RAW
+	 * frame. This is why we bytesperline/2 is equal to the padded with
+	 */
 	if (ia_css_frame_allocate(&res, arg->fmt.width, arg->fmt.height,
 				       sh_format, padded_width, 0)) {
 		ret = -ENOMEM;
@@ -5017,8 +5032,9 @@ static inline int atomisp_set_sensor_mipi_to_isp(
 		    asd->stream_env[stream_id].isys_info[1].height);
 	}
 
-	/* Compatibility for sensors which provide no media bus code
-	 * in s_mbus_framefmt() nor support pad formats. */
+	/* Compatibility for sensors which provide no media bus
+	 * code in s_mbus_framefmt() nor support pad formats.
+	 */
 	if (mipi_info->input_format != -1) {
 		bayer_order = mipi_info->raw_bayer_order;
 
@@ -5255,7 +5271,8 @@ static int atomisp_set_fmt_to_isp(struct video_device *vdev,
 		}
 
 		/* FIXME: proper format name for this one. See
-		   atomisp_output_fmts[] in atomisp_v4l2.c */
+		 * atomisp_output_fmts[] in atomisp_v4l2.c
+		 */
 		vf_ffmt.code = V4L2_MBUS_FMT_CUSTOM_YUV420;
 
 		atomisp_subdev_set_selection(&asd->subdev, fh.pad,
@@ -5410,8 +5427,9 @@ static int atomisp_set_fmt_to_isp(struct video_device *vdev,
 	if (asd->continuous_mode->val &&
 	    (configure_pp_input == atomisp_css_preview_configure_pp_input ||
 	     configure_pp_input == atomisp_css_video_configure_pp_input)) {
-		/* for isp 2.2, configure pp input is available for continuous
-		 * mode */
+		/* for isp 2.2, configure pp input is
+		 * available for continuous mode
+		 */
 		ret = configure_pp_input(asd, isp_sink_crop->width,
 					 isp_sink_crop->height);
 		if (ret) {
@@ -5893,7 +5911,8 @@ int atomisp_set_fmt(struct video_device *vdev, struct v4l2_format *f)
 			V4L2_SEL_TGT_CROP);
 
 	/* Try to enable YUV downscaling if ISP input is 10 % (either
-	 * width or height) bigger than the desired result. */
+	 * width or height) bigger than the desired result.
+	 */
 	if (isp_sink_crop.width * 9 / 10 < f->fmt.pix.width ||
 	    isp_sink_crop.height * 9 / 10 < f->fmt.pix.height ||
 	    (atomisp_subdev_format_conversion(asd, source_pad) &&
@@ -5960,7 +5979,8 @@ int atomisp_set_fmt(struct video_device *vdev, struct v4l2_format *f)
 		 * GMIN to work around a CTS failures (GMINL-539)
 		 * which appears to be related by a hardware
 		 * performance limitation.  It's unclear why this
-		 * particular code triggers the issue. */
+		 * particular code triggers the issue.
+		 */
 		if (!IS_ISP2401 || crop_needs_override) {
 			if (isp_sink_crop.width * main_compose.height >
 			    isp_sink_crop.height * main_compose.width) {
@@ -6275,7 +6295,8 @@ int atomisp_offline_capture_configure(struct atomisp_sub_device *asd,
 			}
 
 			/* TODO: this can be removed once user-space
-			 *       has been updated to use control API */
+			 *       has been updated to use control API
+			 */
 			asd->continuous_raw_buffer_size->val =
 			    max_t(int,
 				  asd->continuous_raw_buffer_size->val,
-- 
2.7.4





[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux