Em sex, 2021-04-09 às 19:25 +0200, Julia Lawall escreveu: > > > On Fri, 9 Apr 2021, ascordeiro wrote: > > > Em sex, 2021-04-09 às 13:44 -0300, Ezequiel Garcia escreveu: > > > Hi Aline, > > > > Hi Ezequiel, > > > > > > On Fri, 2021-04-09 at 10:54 -0300, Aline Santana Cordeiro wrote: > > > > Rewrite macros resembling functions #define HANTRO_PP_REG_WRITE > > > > and #define HANTRO_PP_RED_WRITE_S in lower case, according with > > > > code style. > > Maybe you can see if these macros can be converted to static inline > functions. Macros don't provide any type checking. Okay! I'm going to check this option. Thank you for the advice! Aline > > julia > > > > > > > > > > > Where is this written in the Coding Style? > > > > I found this in section 12, about Macros, Enums and RTL in both > > references: > > https://www.kernel.org/doc/html/latest/process/coding-style.html > > https://elixir.bootlin.com/linux/latest/source/Documentation/process/coding-style.rst > > > > > > Thanks! > > > Ezequiel > > > > Thank you! > > Aline > > > > > > > Signed-off-by: Aline Santana Cordeiro < > > > > alinesantanacordeiro@xxxxxxxxx> > > > > --- > > > > drivers/staging/media/hantro/hantro_postproc.c | 34 > > > > +++++++++++++- > > > > ------------ > > > > 1 file changed, 17 insertions(+), 17 deletions(-) > > > > > > > > diff --git a/drivers/staging/media/hantro/hantro_postproc.c > > > > b/drivers/staging/media/hantro/hantro_postproc.c > > > > index 6d2a8f2a..06279c0 100644 > > > > --- a/drivers/staging/media/hantro/hantro_postproc.c > > > > +++ b/drivers/staging/media/hantro/hantro_postproc.c > > > > @@ -12,14 +12,14 @@ > > > > #include "hantro_hw.h" > > > > #include "hantro_g1_regs.h" > > > > > > > > -#define HANTRO_PP_REG_WRITE(vpu, reg_name, val) \ > > > > +#define hantro_pp_reg_write(vpu, reg_name, val) \ > > > > { \ > > > > hantro_reg_write(vpu, \ > > > > &(vpu)->variant->postproc_regs- > > > > >reg_name, > > > > \ > > > > val); \ > > > > } > > > > > > > > -#define HANTRO_PP_REG_WRITE_S(vpu, reg_name, val) \ > > > > +#define hantro_pp_reg_write_s(vpu, reg_name, val) \ > > > > { \ > > > > hantro_reg_write_s(vpu, \ > > > > &(vpu)->variant->postproc_regs- > > > > > reg_name, \ > > > > @@ -61,7 +61,7 @@ void hantro_postproc_enable(struct hantro_ctx > > > > *ctx) > > > > return; > > > > > > > > /* Turn on pipeline mode. Must be done first. */ > > > > - HANTRO_PP_REG_WRITE_S(vpu, pipeline_en, 0x1); > > > > + hantro_pp_reg_write_s(vpu, pipeline_en, 0x1); > > > > > > > > src_pp_fmt = VPU_PP_IN_NV12; > > > > > > > > @@ -79,19 +79,19 @@ void hantro_postproc_enable(struct > > > > hantro_ctx > > > > *ctx) > > > > dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx); > > > > dst_dma = vb2_dma_contig_plane_dma_addr(&dst_buf- > > > > >vb2_buf, > > > > 0); > > > > > > > > - HANTRO_PP_REG_WRITE(vpu, clk_gate, 0x1); > > > > - HANTRO_PP_REG_WRITE(vpu, out_endian, 0x1); > > > > - HANTRO_PP_REG_WRITE(vpu, out_swap32, 0x1); > > > > - HANTRO_PP_REG_WRITE(vpu, max_burst, 16); > > > > - HANTRO_PP_REG_WRITE(vpu, out_luma_base, dst_dma); > > > > - HANTRO_PP_REG_WRITE(vpu, input_width, MB_WIDTH(ctx- > > > > > dst_fmt.width)); > > > > - HANTRO_PP_REG_WRITE(vpu, input_height, MB_HEIGHT(ctx- > > > > > dst_fmt.height)); > > > > - HANTRO_PP_REG_WRITE(vpu, input_fmt, src_pp_fmt); > > > > - HANTRO_PP_REG_WRITE(vpu, output_fmt, dst_pp_fmt); > > > > - HANTRO_PP_REG_WRITE(vpu, output_width, ctx- > > > > >dst_fmt.width); > > > > - HANTRO_PP_REG_WRITE(vpu, output_height, ctx- > > > > > dst_fmt.height); > > > > - HANTRO_PP_REG_WRITE(vpu, orig_width, MB_WIDTH(ctx- > > > > > dst_fmt.width)); > > > > - HANTRO_PP_REG_WRITE(vpu, display_width, ctx- > > > > > dst_fmt.width); > > > > + hantro_pp_reg_write(vpu, clk_gate, 0x1); > > > > + hantro_pp_reg_write(vpu, out_endian, 0x1); > > > > + hantro_pp_reg_write(vpu, out_swap32, 0x1); > > > > + hantro_pp_reg_write(vpu, max_burst, 16); > > > > + hantro_pp_reg_write(vpu, out_luma_base, dst_dma); > > > > + hantro_pp_reg_write(vpu, input_width, MB_WIDTH(ctx- > > > > > dst_fmt.width)); > > > > + hantro_pp_reg_write(vpu, input_height, MB_HEIGHT(ctx- > > > > > dst_fmt.height)); > > > > + hantro_pp_reg_write(vpu, input_fmt, src_pp_fmt); > > > > + hantro_pp_reg_write(vpu, output_fmt, dst_pp_fmt); > > > > + hantro_pp_reg_write(vpu, output_width, ctx- > > > > >dst_fmt.width); > > > > + hantro_pp_reg_write(vpu, output_height, ctx- > > > > > dst_fmt.height); > > > > + hantro_pp_reg_write(vpu, orig_width, MB_WIDTH(ctx- > > > > > dst_fmt.width)); > > > > + hantro_pp_reg_write(vpu, display_width, ctx- > > > > > dst_fmt.width); > > > > } > > > > > > > > void hantro_postproc_free(struct hantro_ctx *ctx) > > > > @@ -146,5 +146,5 @@ void hantro_postproc_disable(struct > > > > hantro_ctx > > > > *ctx) > > > > if (!vpu->variant->postproc_regs) > > > > return; > > > > > > > > - HANTRO_PP_REG_WRITE_S(vpu, pipeline_en, 0x0); > > > > + hantro_pp_reg_write_s(vpu, pipeline_en, 0x0); > > > > } > > > > > > > > > > > > -- > > You received this message because you are subscribed to the Google > > Groups "outreachy-kernel" group. > > To unsubscribe from this group and stop receiving emails from it, > > send an email to outreachy-kernel+unsubscribe@xxxxxxxxxxxxxxxx. > > To view this discussion on the web visit > > https://groups.google.com/d/msgid/outreachy-kernel/138794d79c42510d9b6ae744df20216904773032.camel%40gmail.com > > .
