Hi Beatriz,
I'm now reviewing staging/media patches instead of Greg KH. See Vaishali's
email from today: "Sending patches for the drivers/staging/media".
On 01/04/2021 17:07, Beatriz Martins de Carvalho wrote:
> Remove checkpatch check "CHECK: Lines should not end with a '('" with
> argument present in next line and reorganize characters so the lines
> are under 100 columns
>
> Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@xxxxxxxxx>
> ---
> drivers/staging/media/omap4iss/iss.c | 46 +++++++++++++---------------
> 1 file changed, 22 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/staging/media/omap4iss/iss.c b/drivers/staging/media/omap4iss/iss.c
> index dae9073e7d3c..e8f724dbf810 100644
> --- a/drivers/staging/media/omap4iss/iss.c
> +++ b/drivers/staging/media/omap4iss/iss.c
> @@ -559,9 +559,10 @@ static int iss_reset(struct iss_device *iss)
> iss_reg_set(iss, OMAP4_ISS_MEM_TOP, ISS_HL_SYSCONFIG,
> ISS_HL_SYSCONFIG_SOFTRESET);
>
> - timeout = iss_poll_condition_timeout(
> - !(iss_reg_read(iss, OMAP4_ISS_MEM_TOP, ISS_HL_SYSCONFIG) &
> - ISS_HL_SYSCONFIG_SOFTRESET), 1000, 10, 100);
> + timeout = iss_poll_condition_timeout(!(iss_reg_read(iss,
> + OMAP4_ISS_MEM_TOP, ISS_HL_SYSCONFIG)
> + & ISS_HL_SYSCONFIG_SOFTRESET),
> + 1000, 10, 100);
> if (timeout) {
> dev_err(iss->dev, "ISS reset timeout\n");
> return -ETIMEDOUT;
> @@ -583,9 +584,10 @@ static int iss_isp_reset(struct iss_device *iss)
>
> iss_reg_set(iss, OMAP4_ISS_MEM_ISP_SYS1, ISP5_CTRL, ISP5_CTRL_MSTANDBY);
>
> - timeout = iss_poll_condition_timeout(
> - iss_reg_read(iss, OMAP4_ISS_MEM_ISP_SYS1, ISP5_CTRL) &
> - ISP5_CTRL_MSTANDBY_WAIT, 1000000, 1000, 1500);
> + timeout = iss_poll_condition_timeout(iss_reg_read(iss,
> + OMAP4_ISS_MEM_ISP_SYS1, ISP5_CTRL)
> + & ISP5_CTRL_MSTANDBY_WAIT, 1000000,
> + 1000, 1500);
> if (timeout) {
> dev_err(iss->dev, "ISP5 standby timeout\n");
> return -ETIMEDOUT;
> @@ -595,9 +597,10 @@ static int iss_isp_reset(struct iss_device *iss)
> iss_reg_set(iss, OMAP4_ISS_MEM_ISP_SYS1, ISP5_SYSCONFIG,
> ISP5_SYSCONFIG_SOFTRESET);
>
> - timeout = iss_poll_condition_timeout(
> - !(iss_reg_read(iss, OMAP4_ISS_MEM_ISP_SYS1, ISP5_SYSCONFIG) &
> - ISP5_SYSCONFIG_SOFTRESET), 1000000, 1000, 1500);
> + timeout = iss_poll_condition_timeout(!(iss_reg_read(iss, OMAP4_ISS_MEM_ISP_SYS1,
> + ISP5_SYSCONFIG) &
> + ISP5_SYSCONFIG_SOFTRESET), 1000000,
> + 1000, 1500);
As several other people already commented, these changes do not improve readability.
Just leave this code alone, it's good enough. Even splitting up the condition into
a separate function would degrade readability since that would make it harder to
discover the exact condition that will be polled for.
Not everything that checkpatch.pl flags is necessarily bad code :-)
> if (timeout) {
> dev_err(iss->dev, "ISP5 reset timeout\n");
> return -ETIMEDOUT;
> @@ -1104,33 +1107,28 @@ static int iss_create_links(struct iss_device *iss)
> }
>
> /* Connect the submodules. */
> - ret = media_create_pad_link(
> - &iss->csi2a.subdev.entity, CSI2_PAD_SOURCE,
> - &iss->ipipeif.subdev.entity, IPIPEIF_PAD_SINK, 0);
> + ret = media_create_pad_link(&iss->csi2a.subdev.entity, CSI2_PAD_SOURCE,
> + &iss->ipipeif.subdev.entity, IPIPEIF_PAD_SINK, 0);
> if (ret < 0)
> return ret;
>
> - ret = media_create_pad_link(
> - &iss->csi2b.subdev.entity, CSI2_PAD_SOURCE,
> - &iss->ipipeif.subdev.entity, IPIPEIF_PAD_SINK, 0);
> + ret = media_create_pad_link(&iss->csi2b.subdev.entity, CSI2_PAD_SOURCE,
> + &iss->ipipeif.subdev.entity, IPIPEIF_PAD_SINK, 0);
> if (ret < 0)
> return ret;
>
> - ret = media_create_pad_link(
> - &iss->ipipeif.subdev.entity, IPIPEIF_PAD_SOURCE_VP,
> - &iss->resizer.subdev.entity, RESIZER_PAD_SINK, 0);
> + ret = media_create_pad_link(&iss->ipipeif.subdev.entity, IPIPEIF_PAD_SOURCE_VP,
> + &iss->resizer.subdev.entity, RESIZER_PAD_SINK, 0);
> if (ret < 0)
> return ret;
>
> - ret = media_create_pad_link(
> - &iss->ipipeif.subdev.entity, IPIPEIF_PAD_SOURCE_VP,
> - &iss->ipipe.subdev.entity, IPIPE_PAD_SINK, 0);
> + ret = media_create_pad_link(&iss->ipipeif.subdev.entity, IPIPEIF_PAD_SOURCE_VP,
> + &iss->ipipe.subdev.entity, IPIPE_PAD_SINK, 0);
> if (ret < 0)
> return ret;
>
> - ret = media_create_pad_link(
> - &iss->ipipe.subdev.entity, IPIPE_PAD_SOURCE_VP,
> - &iss->resizer.subdev.entity, RESIZER_PAD_SINK, 0);
> + ret = media_create_pad_link(&iss->ipipe.subdev.entity, IPIPE_PAD_SOURCE_VP,
> + &iss->resizer.subdev.entity, RESIZER_PAD_SINK, 0);
> if (ret < 0)
> return ret;
>
>
These, however, are readability improvements, so I'm happy with that.
Regards,
Hans
