[PATCH 09/16] tty: amiserial: add missing TIOCSSERIAL jiffies conversions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The tty-port close_delay and closing_wait parameters set by TIOCSSERIAL
are specified in jiffies, while the values returned by TIOCGSERIAL are
specified in centiseconds.

Add the missing conversions so that TIOCSSERIAL works as expected also
if this code is ever reused on a system where HZ is not 100.

Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
 drivers/tty/amiserial.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index ec6802ba2bf8..ca48ce5a0862 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -937,15 +937,21 @@ static void rs_unthrottle(struct tty_struct * tty)
 static int get_serial_info(struct tty_struct *tty, struct serial_struct *ss)
 {
 	struct serial_state *state = tty->driver_data;
+	unsigned int close_delay, closing_wait;
 
 	tty_lock(tty);
+	close_delay = jiffies_to_msecs(state->tport.close_delay) / 10;
+	closing_wait = state->tport.closing_wait;
+	if (closing_wait != ASYNC_CLOSING_WAIT_NONE)
+		closing_wait = jiffies_to_msecs(closing_wait) / 10;
+
 	ss->line = tty->index;
 	ss->port = state->port;
 	ss->flags = state->tport.flags;
 	ss->xmit_fifo_size = state->xmit_fifo_size;
 	ss->baud_base = state->baud_base;
-	ss->close_delay = state->tport.close_delay;
-	ss->closing_wait = state->tport.closing_wait;
+	ss->close_delay = close_delay;
+	ss->closing_wait = closing_wait;
 	ss->custom_divisor = state->custom_divisor;
 	tty_unlock(tty);
 	return 0;
@@ -957,6 +963,7 @@ static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss)
 	struct tty_port *port = &state->tport;
 	bool change_spd;
 	int 			retval = 0;
+	unsigned int close_delay, closing_wait;
 
 	tty_lock(tty);
 	change_spd = ((ss->flags ^ port->flags) & ASYNC_SPD_MASK) ||
@@ -966,11 +973,16 @@ static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss)
 		tty_unlock(tty);
 		return -EINVAL;
 	}
-  
+
+	close_delay = msecs_to_jiffies(ss->close_delay * 10);
+	closing_wait = ss->closing_wait;
+	if (closing_wait != ASYNC_CLOSING_WAIT_NONE)
+		closing_wait = msecs_to_jiffies(closing_wait * 10);
+
 	if (!serial_isroot()) {
 		if ((ss->baud_base != state->baud_base) ||
-		    (ss->close_delay != port->close_delay) ||
-		    (ss->closing_wait != port->closing_wait) ||
+		    (close_delay != port->close_delay) ||
+		    (closing_wait != port->closing_wait) ||
 		    (ss->xmit_fifo_size != state->xmit_fifo_size) ||
 		    ((ss->flags & ~ASYNC_USR_MASK) !=
 		     (port->flags & ~ASYNC_USR_MASK))) {
@@ -997,8 +1009,8 @@ static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss)
 	port->flags = ((port->flags & ~ASYNC_FLAGS) |
 			(ss->flags & ASYNC_FLAGS));
 	state->custom_divisor = ss->custom_divisor;
-	port->close_delay = ss->close_delay * HZ/100;
-	port->closing_wait = ss->closing_wait * HZ/100;
+	port->close_delay = close_delay;
+	port->closing_wait = closing_wait;
 
 check_and_exit:
 	if (tty_port_initialized(port)) {
-- 
2.26.3





[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux