[PATCH v2 07/49] staging: sm750fb: Update programModeRegisters to snake case

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Fix "Avoid CamelCase" checkpatch.pl check for the function
programModeRegisters, including its name, parameters, and body.

Signed-off-by: Pavle Rohalj <pavle.rohalj@xxxxxxxxx>
---
 drivers/staging/sm750fb/ddk750_mode.c | 48 +++++++++++++--------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 2fae81b47f46..5c685b4e2fd6 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -75,7 +75,7 @@ display_control_adjust_sm750le(struct mode_parameter *mode_param,
 }
 
 /* only timing related registers will be  programed */
-static int programModeRegisters(struct mode_parameter *pModeParam,
+static int program_mode_registers(struct mode_parameter *mode_param,
 				struct pll_value *pll)
 {
 	int ret = 0;
@@ -86,46 +86,46 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
 		/* programe secondary pixel clock */
 		poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
 
-		tmp = ((pModeParam->horizontal_total - 1) <<
+		tmp = ((mode_param->horizontal_total - 1) <<
 		       CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
 		     CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
-		tmp |= (pModeParam->horizontal_display_end - 1) &
+		tmp |= (mode_param->horizontal_display_end - 1) &
 		      CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
 
 		poke32(CRT_HORIZONTAL_TOTAL, tmp);
 
-		tmp = (pModeParam->horizontal_sync_width <<
+		tmp = (mode_param->horizontal_sync_width <<
 		       CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
 		     CRT_HORIZONTAL_SYNC_WIDTH_MASK;
-		tmp |= (pModeParam->horizontal_sync_start - 1) &
+		tmp |= (mode_param->horizontal_sync_start - 1) &
 		      CRT_HORIZONTAL_SYNC_START_MASK;
 
 		poke32(CRT_HORIZONTAL_SYNC, tmp);
 
-		tmp = ((pModeParam->vertical_total - 1) <<
+		tmp = ((mode_param->vertical_total - 1) <<
 		       CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
 		     CRT_VERTICAL_TOTAL_TOTAL_MASK;
-		tmp |= (pModeParam->vertical_display_end - 1) &
+		tmp |= (mode_param->vertical_display_end - 1) &
 		      CRT_VERTICAL_TOTAL_DISPLAY_END_MASK;
 
 		poke32(CRT_VERTICAL_TOTAL, tmp);
 
-		tmp = ((pModeParam->vertical_sync_height <<
+		tmp = ((mode_param->vertical_sync_height <<
 		       CRT_VERTICAL_SYNC_HEIGHT_SHIFT)) &
 		     CRT_VERTICAL_SYNC_HEIGHT_MASK;
-		tmp |= (pModeParam->vertical_sync_start - 1) &
+		tmp |= (mode_param->vertical_sync_start - 1) &
 		      CRT_VERTICAL_SYNC_START_MASK;
 
 		poke32(CRT_VERTICAL_SYNC, tmp);
 
 		tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
-		if (pModeParam->vertical_sync_polarity)
+		if (mode_param->vertical_sync_polarity)
 			tmp |= DISPLAY_CTRL_VSYNC_PHASE;
-		if (pModeParam->horizontal_sync_polarity)
+		if (mode_param->horizontal_sync_polarity)
 			tmp |= DISPLAY_CTRL_HSYNC_PHASE;
 
 		if (sm750_get_chip_type() == SM750LE) {
-			display_control_adjust_sm750le(pModeParam, tmp);
+			display_control_adjust_sm750le(mode_param, tmp);
 		} else {
 			reg = peek32(CRT_DISPLAY_CTRL) &
 				~(DISPLAY_CTRL_VSYNC_PHASE |
@@ -140,40 +140,40 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
 
 		poke32(PANEL_PLL_CTRL, sm750_format_pll_reg(pll));
 
-		reg = ((pModeParam->horizontal_total - 1) <<
+		reg = ((mode_param->horizontal_total - 1) <<
 			PANEL_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
 			PANEL_HORIZONTAL_TOTAL_TOTAL_MASK;
-		reg |= ((pModeParam->horizontal_display_end - 1) &
+		reg |= ((mode_param->horizontal_display_end - 1) &
 			PANEL_HORIZONTAL_TOTAL_DISPLAY_END_MASK);
 		poke32(PANEL_HORIZONTAL_TOTAL, reg);
 
 		poke32(PANEL_HORIZONTAL_SYNC,
-		       ((pModeParam->horizontal_sync_width <<
+		       ((mode_param->horizontal_sync_width <<
 			 PANEL_HORIZONTAL_SYNC_WIDTH_SHIFT) &
 			PANEL_HORIZONTAL_SYNC_WIDTH_MASK) |
-		       ((pModeParam->horizontal_sync_start - 1) &
+		       ((mode_param->horizontal_sync_start - 1) &
 			PANEL_HORIZONTAL_SYNC_START_MASK));
 
 		poke32(PANEL_VERTICAL_TOTAL,
-		       (((pModeParam->vertical_total - 1) <<
+		       (((mode_param->vertical_total - 1) <<
 			 PANEL_VERTICAL_TOTAL_TOTAL_SHIFT) &
 			PANEL_VERTICAL_TOTAL_TOTAL_MASK) |
-		       ((pModeParam->vertical_display_end - 1) &
+		       ((mode_param->vertical_display_end - 1) &
 			PANEL_VERTICAL_TOTAL_DISPLAY_END_MASK));
 
 		poke32(PANEL_VERTICAL_SYNC,
-		       ((pModeParam->vertical_sync_height <<
+		       ((mode_param->vertical_sync_height <<
 			 PANEL_VERTICAL_SYNC_HEIGHT_SHIFT) &
 			PANEL_VERTICAL_SYNC_HEIGHT_MASK) |
-		       ((pModeParam->vertical_sync_start - 1) &
+		       ((mode_param->vertical_sync_start - 1) &
 			PANEL_VERTICAL_SYNC_START_MASK));
 
 		tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
-		if (pModeParam->vertical_sync_polarity)
+		if (mode_param->vertical_sync_polarity)
 			tmp |= DISPLAY_CTRL_VSYNC_PHASE;
-		if (pModeParam->horizontal_sync_polarity)
+		if (mode_param->horizontal_sync_polarity)
 			tmp |= DISPLAY_CTRL_HSYNC_PHASE;
-		if (pModeParam->clock_phase_polarity)
+		if (mode_param->clock_phase_polarity)
 			tmp |= DISPLAY_CTRL_CLOCK_PHASE;
 
 		reserved = PANEL_DISPLAY_CTRL_RESERVED_MASK |
@@ -220,6 +220,6 @@ int ddk750_setModeTiming(struct mode_parameter *parm, enum clock_type clock)
 		outb_p(0x88, 0x3d4);
 		outb_p(0x06, 0x3d5);
 	}
-	programModeRegisters(parm, &pll);
+	program_mode_registers(parm, &pll);
 	return 0;
 }
-- 
2.30.2





[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux