Fix "Avoid CamelCase" checkpatch.pl checks for 106 camel case
instances:
Signed-off-by: Pavle Rohalj <pavle.rohalj@xxxxxxxxx>
---
drivers/staging/sm750fb/ddk750_dvi.c | 32 ++---
drivers/staging/sm750fb/ddk750_dvi.h | 64 +++++-----
drivers/staging/sm750fb/ddk750_mode.c | 88 +++++++-------
drivers/staging/sm750fb/ddk750_mode.h | 2 +-
drivers/staging/sm750fb/ddk750_power.h | 10 +-
drivers/staging/sm750fb/ddk750_sii164.c | 152 ++++++++++++------------
drivers/staging/sm750fb/ddk750_sii164.h | 40 +++----
drivers/staging/sm750fb/sm750.c | 128 ++++++++++----------
drivers/staging/sm750fb/sm750.h | 54 ++++-----
drivers/staging/sm750fb/sm750_accel.c | 148 +++++++++++------------
drivers/staging/sm750fb/sm750_accel.h | 42 +++----
drivers/staging/sm750fb/sm750_cursor.c | 14 +--
drivers/staging/sm750fb/sm750_cursor.h | 10 +-
drivers/staging/sm750fb/sm750_hw.c | 54 ++++-----
14 files changed, 419 insertions(+), 419 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
index cd564ea40779..a11b5fae45fa 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -11,26 +11,26 @@
* function API. Please set the function pointer to NULL whenever the function
* is not supported.
*/
-static struct dvi_ctrl_device g_dcftSupportedDviController[] = {
+static struct dvi_ctrl_device g_dcft_supported_dvi_controller[] = {
#ifdef DVI_CTRL_SII164
{
- .pfnInit = sii164InitChip,
- .pfnGetVendorId = sii164GetVendorID,
- .pfnGetDeviceId = sii164GetDeviceID,
+ .pfn_init = sii164_init_chip,
+ .pfn_get_vendor_id = sii164_get_vendor_id,
+ .pfn_get_device_id = sii164_get_device_id,
#ifdef SII164_FULL_FUNCTIONS
- .pfnResetChip = sii164ResetChip,
- .pfnGetChipString = sii164GetChipString,
- .pfnSetPower = sii164SetPower,
- .pfnEnableHotPlugDetection = sii164EnableHotPlugDetection,
- .pfnIsConnected = sii164IsConnected,
- .pfnCheckInterrupt = sii164CheckInterrupt,
- .pfnClearInterrupt = sii164ClearInterrupt,
+ .pfn_reset_chip = sii164_reset_chip,
+ .pfn_get_chip_string = sii164_get_chip_string,
+ .pfn_set_power = sii164_set_power,
+ .pfn_enable_hot_plug_detection = sii164_enable_hot_plug_detection,
+ .pfn_is_connected = sii164_is_connected,
+ .pfn_check_interrupt = sii164_check_interrupt,
+ .pfn_clear_interrupt = sii164_clear_interrupt,
#endif
},
#endif
};
-int dviInit(unsigned char edge_select,
+int dvi_init(unsigned char edge_select,
unsigned char bus_select,
unsigned char dual_edge_clk_select,
unsigned char hsync_enable,
@@ -41,11 +41,11 @@ int dviInit(unsigned char edge_select,
unsigned char pll_filter_enable,
unsigned char pll_filter_value)
{
- struct dvi_ctrl_device *pCurrentDviCtrl;
+ struct dvi_ctrl_device *p_current_dvi_ctrl;
- pCurrentDviCtrl = g_dcftSupportedDviController;
- if (pCurrentDviCtrl->pfnInit) {
- return pCurrentDviCtrl->pfnInit(edge_select,
+ p_current_dvi_ctrl = g_dcft_supported_dvi_controller;
+ if (p_current_dvi_ctrl->pfn_init) {
+ return p_current_dvi_ctrl->pfn_init(edge_select,
bus_select,
dual_edge_clk_select,
hsync_enable,
diff --git a/drivers/staging/sm750fb/ddk750_dvi.h b/drivers/staging/sm750fb/ddk750_dvi.h
index 1c7a565b617a..57ae2d2672a7 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.h
+++ b/drivers/staging/sm750fb/ddk750_dvi.h
@@ -4,54 +4,54 @@
/* dvi chip stuffs structros */
-typedef long (*PFN_DVICTRL_INIT)(unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue);
+typedef long (*PFN_DVICTRL_INIT)(unsigned char edge_select,
+ unsigned char bus_select,
+ unsigned char dual_edge_clk_select,
+ unsigned char hsync_enable,
+ unsigned char vsync_enable,
+ unsigned char deskew_enable,
+ unsigned char deskew_setting,
+ unsigned char continuous_sync_enable,
+ unsigned char pll_filter_enable,
+ unsigned char pll_filter_value);
typedef void (*PFN_DVICTRL_RESETCHIP)(void);
typedef char* (*PFN_DVICTRL_GETCHIPSTRING)(void);
typedef unsigned short (*PFN_DVICTRL_GETVENDORID)(void);
typedef unsigned short (*PFN_DVICTRL_GETDEVICEID)(void);
-typedef void (*PFN_DVICTRL_SETPOWER)(unsigned char powerUp);
-typedef void (*PFN_DVICTRL_HOTPLUGDETECTION)(unsigned char enableHotPlug);
+typedef void (*PFN_DVICTRL_SETPOWER)(unsigned char power_up);
+typedef void (*PFN_DVICTRL_HOTPLUGDETECTION)(unsigned char enable_hot_plug);
typedef unsigned char (*PFN_DVICTRL_ISCONNECTED)(void);
typedef unsigned char (*PFN_DVICTRL_CHECKINTERRUPT)(void);
typedef void (*PFN_DVICTRL_CLEARINTERRUPT)(void);
/* Structure to hold all the function pointer to the DVI Controller. */
struct dvi_ctrl_device {
- PFN_DVICTRL_INIT pfnInit;
- PFN_DVICTRL_RESETCHIP pfnResetChip;
- PFN_DVICTRL_GETCHIPSTRING pfnGetChipString;
- PFN_DVICTRL_GETVENDORID pfnGetVendorId;
- PFN_DVICTRL_GETDEVICEID pfnGetDeviceId;
- PFN_DVICTRL_SETPOWER pfnSetPower;
- PFN_DVICTRL_HOTPLUGDETECTION pfnEnableHotPlugDetection;
- PFN_DVICTRL_ISCONNECTED pfnIsConnected;
- PFN_DVICTRL_CHECKINTERRUPT pfnCheckInterrupt;
- PFN_DVICTRL_CLEARINTERRUPT pfnClearInterrupt;
+ PFN_DVICTRL_INIT pfn_init;
+ PFN_DVICTRL_RESETCHIP pfn_reset_chip;
+ PFN_DVICTRL_GETCHIPSTRING pfn_get_chip_string;
+ PFN_DVICTRL_GETVENDORID pfn_get_vendor_id;
+ PFN_DVICTRL_GETDEVICEID pfn_get_device_id;
+ PFN_DVICTRL_SETPOWER pfn_set_power;
+ PFN_DVICTRL_HOTPLUGDETECTION pfn_enable_hot_plug_detection;
+ PFN_DVICTRL_ISCONNECTED pfn_is_connected;
+ PFN_DVICTRL_CHECKINTERRUPT pfn_check_interrupt;
+ PFN_DVICTRL_CLEARINTERRUPT pfn_clear_interrupt;
};
#define DVI_CTRL_SII164
/* dvi functions prototype */
-int dviInit(unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue);
+int dvi_init(unsigned char edge_select,
+ unsigned char bus_select,
+ unsigned char dual_edge_clk_select,
+ unsigned char hsync_enable,
+ unsigned char vsync_enable,
+ unsigned char deskew_enable,
+ unsigned char deskew_setting,
+ unsigned char continuous_sync_enable,
+ unsigned char pll_filter_enable,
+ unsigned char pll_filter_value);
#endif
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index e00a6cb31947..5628d4fbb908 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -14,13 +14,13 @@
* in bit 29:27 of Display Control register.
*/
static unsigned long
-displayControlAdjust_SM750LE(struct mode_parameter *pModeParam,
- unsigned long dispControl)
+display_control_adjust_sm750le(struct mode_parameter *p_mode_param,
+ unsigned long disp_control)
{
unsigned long x, y;
- x = pModeParam->horizontal_display_end;
- y = pModeParam->vertical_display_end;
+ x = p_mode_param->horizontal_display_end;
+ y = p_mode_param->vertical_display_end;
/*
* SM750LE has to set up the top-left and bottom-right
@@ -36,46 +36,46 @@ displayControlAdjust_SM750LE(struct mode_parameter *pModeParam,
((x - 1) & CRT_AUTO_CENTERING_BR_RIGHT_MASK));
/*
- * Assume common fields in dispControl have been properly set before
+ * Assume common fields in disp_control have been properly set before
* calling this function.
- * This function only sets the extra fields in dispControl.
+ * This function only sets the extra fields in disp_control.
*/
/* Clear bit 29:27 of display control register */
- dispControl &= ~CRT_DISPLAY_CTRL_CLK_MASK;
+ disp_control &= ~CRT_DISPLAY_CTRL_CLK_MASK;
/* Set bit 29:27 of display control register for the right clock */
/* Note that SM750LE only need to supported 7 resolutions. */
if (x == 800 && y == 600)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL41;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL41;
else if (x == 1024 && y == 768)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL65;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL65;
else if (x == 1152 && y == 864)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL80;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL80;
else if (x == 1280 && y == 768)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL80;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL80;
else if (x == 1280 && y == 720)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL74;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL74;
else if (x == 1280 && y == 960)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL108;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL108;
else if (x == 1280 && y == 1024)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL108;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL108;
else /* default to VGA clock */
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL25;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL25;
/* Set bit 25:24 of display controller */
- dispControl |= (CRT_DISPLAY_CTRL_CRTSELECT | CRT_DISPLAY_CTRL_RGBBIT);
+ disp_control |= (CRT_DISPLAY_CTRL_CRTSELECT | CRT_DISPLAY_CTRL_RGBBIT);
/* Set bit 14 of display controller */
- dispControl |= DISPLAY_CTRL_CLOCK_PHASE;
+ disp_control |= DISPLAY_CTRL_CLOCK_PHASE;
- poke32(CRT_DISPLAY_CTRL, dispControl);
+ poke32(CRT_DISPLAY_CTRL, disp_control);
- return dispControl;
+ return disp_control;
}
/* only timing related registers will be programed */
-static int programModeRegisters(struct mode_parameter *pModeParam,
+static int program_mode_registers(struct mode_parameter *p_mode_param,
struct pll_value *pll)
{
int ret = 0;
@@ -86,46 +86,46 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
/* programe secondary pixel clock */
poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
- tmp = ((pModeParam->horizontal_total - 1) <<
+ tmp = ((p_mode_param->horizontal_total - 1) <<
CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
- tmp |= (pModeParam->horizontal_display_end - 1) &
+ tmp |= (p_mode_param->horizontal_display_end - 1) &
CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
poke32(CRT_HORIZONTAL_TOTAL, tmp);
- tmp = (pModeParam->horizontal_sync_width <<
+ tmp = (p_mode_param->horizontal_sync_width <<
CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
CRT_HORIZONTAL_SYNC_WIDTH_MASK;
- tmp |= (pModeParam->horizontal_sync_start - 1) &
+ tmp |= (p_mode_param->horizontal_sync_start - 1) &
CRT_HORIZONTAL_SYNC_START_MASK;
poke32(CRT_HORIZONTAL_SYNC, tmp);
- tmp = ((pModeParam->vertical_total - 1) <<
+ tmp = ((p_mode_param->vertical_total - 1) <<
CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
CRT_VERTICAL_TOTAL_TOTAL_MASK;
- tmp |= (pModeParam->vertical_display_end - 1) &
+ tmp |= (p_mode_param->vertical_display_end - 1) &
CRT_VERTICAL_TOTAL_DISPLAY_END_MASK;
poke32(CRT_VERTICAL_TOTAL, tmp);
- tmp = ((pModeParam->vertical_sync_height <<
+ tmp = ((p_mode_param->vertical_sync_height <<
CRT_VERTICAL_SYNC_HEIGHT_SHIFT)) &
CRT_VERTICAL_SYNC_HEIGHT_MASK;
- tmp |= (pModeParam->vertical_sync_start - 1) &
+ tmp |= (p_mode_param->vertical_sync_start - 1) &
CRT_VERTICAL_SYNC_START_MASK;
poke32(CRT_VERTICAL_SYNC, tmp);
tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
- if (pModeParam->vertical_sync_polarity)
+ if (p_mode_param->vertical_sync_polarity)
tmp |= DISPLAY_CTRL_VSYNC_PHASE;
- if (pModeParam->horizontal_sync_polarity)
+ if (p_mode_param->horizontal_sync_polarity)
tmp |= DISPLAY_CTRL_HSYNC_PHASE;
if (sm750_get_chip_type() == SM750LE) {
- displayControlAdjust_SM750LE(pModeParam, tmp);
+ display_control_adjust_sm750le(p_mode_param, tmp);
} else {
reg = peek32(CRT_DISPLAY_CTRL) &
~(DISPLAY_CTRL_VSYNC_PHASE |
@@ -140,40 +140,40 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
poke32(PANEL_PLL_CTRL, sm750_format_pll_reg(pll));
- reg = ((pModeParam->horizontal_total - 1) <<
+ reg = ((p_mode_param->horizontal_total - 1) <<
PANEL_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
PANEL_HORIZONTAL_TOTAL_TOTAL_MASK;
- reg |= ((pModeParam->horizontal_display_end - 1) &
+ reg |= ((p_mode_param->horizontal_display_end - 1) &
PANEL_HORIZONTAL_TOTAL_DISPLAY_END_MASK);
poke32(PANEL_HORIZONTAL_TOTAL, reg);
poke32(PANEL_HORIZONTAL_SYNC,
- ((pModeParam->horizontal_sync_width <<
+ ((p_mode_param->horizontal_sync_width <<
PANEL_HORIZONTAL_SYNC_WIDTH_SHIFT) &
PANEL_HORIZONTAL_SYNC_WIDTH_MASK) |
- ((pModeParam->horizontal_sync_start - 1) &
+ ((p_mode_param->horizontal_sync_start - 1) &
PANEL_HORIZONTAL_SYNC_START_MASK));
poke32(PANEL_VERTICAL_TOTAL,
- (((pModeParam->vertical_total - 1) <<
+ (((p_mode_param->vertical_total - 1) <<
PANEL_VERTICAL_TOTAL_TOTAL_SHIFT) &
PANEL_VERTICAL_TOTAL_TOTAL_MASK) |
- ((pModeParam->vertical_display_end - 1) &
+ ((p_mode_param->vertical_display_end - 1) &
PANEL_VERTICAL_TOTAL_DISPLAY_END_MASK));
poke32(PANEL_VERTICAL_SYNC,
- ((pModeParam->vertical_sync_height <<
+ ((p_mode_param->vertical_sync_height <<
PANEL_VERTICAL_SYNC_HEIGHT_SHIFT) &
PANEL_VERTICAL_SYNC_HEIGHT_MASK) |
- ((pModeParam->vertical_sync_start - 1) &
+ ((p_mode_param->vertical_sync_start - 1) &
PANEL_VERTICAL_SYNC_START_MASK));
tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
- if (pModeParam->vertical_sync_polarity)
+ if (p_mode_param->vertical_sync_polarity)
tmp |= DISPLAY_CTRL_VSYNC_PHASE;
- if (pModeParam->horizontal_sync_polarity)
+ if (p_mode_param->horizontal_sync_polarity)
tmp |= DISPLAY_CTRL_HSYNC_PHASE;
- if (pModeParam->clock_phase_polarity)
+ if (p_mode_param->clock_phase_polarity)
tmp |= DISPLAY_CTRL_CLOCK_PHASE;
reserved = PANEL_DISPLAY_CTRL_RESERVED_MASK |
@@ -207,7 +207,7 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
return ret;
}
-int ddk750_setModeTiming(struct mode_parameter *parm, enum clock_type clock)
+int ddk750_set_mode_timing(struct mode_parameter *parm, enum clock_type clock)
{
struct pll_value pll;
@@ -220,6 +220,6 @@ int ddk750_setModeTiming(struct mode_parameter *parm, enum clock_type clock)
outb_p(0x88, 0x3d4);
outb_p(0x06, 0x3d5);
}
- programModeRegisters(parm, &pll);
+ program_mode_registers(parm, &pll);
return 0;
}
diff --git a/drivers/staging/sm750fb/ddk750_mode.h b/drivers/staging/sm750fb/ddk750_mode.h
index 2df78a0937b2..1b70885f85e5 100644
--- a/drivers/staging/sm750fb/ddk750_mode.h
+++ b/drivers/staging/sm750fb/ddk750_mode.h
@@ -33,5 +33,5 @@ struct mode_parameter {
enum spolarity clock_phase_polarity;
};
-int ddk750_setModeTiming(struct mode_parameter *parm, enum clock_type clock);
+int ddk750_set_mode_timing(struct mode_parameter *parm, enum clock_type clock);
#endif
diff --git a/drivers/staging/sm750fb/ddk750_power.h b/drivers/staging/sm750fb/ddk750_power.h
index 7002567a47d2..993b868438f6 100644
--- a/drivers/staging/sm750fb/ddk750_power.h
+++ b/drivers/staging/sm750fb/ddk750_power.h
@@ -3,10 +3,10 @@
#define DDK750_POWER_H__
enum dpms {
- crtDPMS_ON = 0x0,
- crtDPMS_STANDBY = 0x1,
- crtDPMS_SUSPEND = 0x2,
- crtDPMS_OFF = 0x3,
+ crt_dpms_on = 0x0,
+ crt_dpms_standby = 0x1,
+ crt_dpms_suspend = 0x2,
+ crt_dpms_off = 0x3,
};
#define set_DAC(off) { \
@@ -15,7 +15,7 @@ enum dpms {
}
void ddk750_set_dpms(enum dpms state);
-void sm750_set_power_mode(unsigned int powerMode);
+void sm750_set_power_mode(unsigned int power_mode);
void sm750_set_current_gate(unsigned int gate);
/*
diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
index 73e0e9f41ec5..1b9b4c8428fd 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -12,11 +12,11 @@
#define USE_HW_I2C
#ifdef USE_HW_I2C
- #define i2cWriteReg sm750_hw_i2c_write_reg
- #define i2cReadReg sm750_hw_i2c_read_reg
+ #define i2c_write_reg sm750_hw_i2c_write_reg
+ #define i2c_read_reg sm750_hw_i2c_read_reg
#else
- #define i2cWriteReg sm750_sw_i2c_write_reg
- #define i2cReadReg sm750_sw_i2c_read_reg
+ #define i2c_write_reg sm750_sw_i2c_write_reg
+ #define i2c_read_reg sm750_sw_i2c_read_reg
#endif
/* SII164 Vendor and Device ID */
@@ -25,45 +25,45 @@
#ifdef SII164_FULL_FUNCTIONS
/* Name of the DVI Controller chip */
-static char *gDviCtrlChipName = "Silicon Image SiI 164";
+static char *g_dvi_ctrl_chip_name = "Silicon Image SiI 164";
#endif
/*
- * sii164GetVendorID
+ * sii164_get_vendor_id
* This function gets the vendor ID of the DVI controller chip.
*
* Output:
* Vendor ID
*/
-unsigned short sii164GetVendorID(void)
+unsigned short sii164_get_vendor_id(void)
{
- unsigned short vendorID;
+ unsigned short vendor_id;
- vendorID = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ vendor_id = ((unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_VENDOR_ID_HIGH) << 8) |
- (unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ (unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_VENDOR_ID_LOW);
- return vendorID;
+ return vendor_id;
}
/*
- * sii164GetDeviceID
+ * sii164_get_device_id
* This function gets the device ID of the DVI controller chip.
*
* Output:
* Device ID
*/
-unsigned short sii164GetDeviceID(void)
+unsigned short sii164_get_device_id(void)
{
- unsigned short deviceID;
+ unsigned short device_id;
- deviceID = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ device_id = ((unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_DEVICE_ID_HIGH) << 8) |
- (unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ (unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_DEVICE_ID_LOW);
- return deviceID;
+ return device_id;
}
/*
@@ -72,7 +72,7 @@ unsigned short sii164GetDeviceID(void)
*/
/*
- * sii164InitChip
+ * sii164_init_chip
* This function initialize and detect the DVI controller chip.
*
* Input:
@@ -118,7 +118,7 @@ unsigned short sii164GetDeviceID(void)
* 0 - Success
* -1 - Fail.
*/
-long sii164InitChip(unsigned char edge_select,
+long sii164_init_chip(unsigned char edge_select,
unsigned char bus_select,
unsigned char dual_edge_clk_select,
unsigned char hsync_enable,
@@ -140,8 +140,8 @@ long sii164InitChip(unsigned char edge_select,
#endif
/* Check if SII164 Chip exists */
- if ((sii164GetVendorID() == SII164_VENDOR_ID) &&
- (sii164GetDeviceID() == SII164_DEVICE_ID)) {
+ if ((sii164_get_vendor_id() == SII164_VENDOR_ID) &&
+ (sii164_get_device_id() == SII164_DEVICE_ID)) {
/*
* Initialize SII164 controller chip.
*/
@@ -176,7 +176,7 @@ long sii164InitChip(unsigned char edge_select,
else
config |= SII164_CONFIGURATION_VSYNC_AS_IS;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
/*
* De-skew enabled with default 111b value.
@@ -214,7 +214,7 @@ long sii164InitChip(unsigned char edge_select,
config |= SII164_DESKEW_8_STEP;
break;
}
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DESKEW, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_DESKEW, config);
/* Enable/Disable Continuous Sync. */
if (continuous_sync_enable == 0)
@@ -231,12 +231,12 @@ long sii164InitChip(unsigned char edge_select,
/* Set the PLL Filter value */
config |= ((pll_filter_value & 0x07) << 1);
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_PLL, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_PLL, config);
/* Recover from Power Down and enable output. */
- config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
+ config = i2c_read_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
config |= SII164_CONFIGURATION_POWER_NORMAL;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
return 0;
}
@@ -250,157 +250,157 @@ long sii164InitChip(unsigned char edge_select,
#ifdef SII164_FULL_FUNCTIONS
/*
- * sii164ResetChip
+ * sii164_reset_chip
* This function resets the DVI Controller Chip.
*/
-void sii164ResetChip(void)
+void sii164_reset_chip(void)
{
/* Power down */
- sii164SetPower(0);
- sii164SetPower(1);
+ sii164_set_power(0);
+ sii164_set_power(1);
}
/*
- * sii164GetChipString
+ * sii164_get_chip_string
* This function returns a char string name of the current DVI Controller
* chip.
*
* It's convenient for application need to display the chip name.
*/
-char *sii164GetChipString(void)
+char *sii164_get_chip_string(void)
{
- return gDviCtrlChipName;
+ return g_dvi_ctrl_chip_name;
}
/*
- * sii164SetPower
+ * sii164_set_power
* This function sets the power configuration of the DVI Controller Chip.
*
* Input:
- * powerUp - Flag to set the power down or up
+ * power_up - Flag to set the power down or up
*/
-void sii164SetPower(unsigned char powerUp)
+void sii164_set_power(unsigned char power_up)
{
unsigned char config;
- config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
- if (powerUp == 1) {
+ config = i2c_read_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
+ if (power_up == 1) {
/* Power up the chip */
config &= ~SII164_CONFIGURATION_POWER_MASK;
config |= SII164_CONFIGURATION_POWER_NORMAL;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
} else {
/* Power down the chip */
config &= ~SII164_CONFIGURATION_POWER_MASK;
config |= SII164_CONFIGURATION_POWER_DOWN;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
}
}
/*
- * sii164SelectHotPlugDetectionMode
+ * sii164_select_hot_plug_detection_mode
* This function selects the mode of the hot plug detection.
*/
static
-void sii164SelectHotPlugDetectionMode(enum sii164_hot_plug_mode hotPlugMode)
+void sii164_select_hot_plug_detection_mode(enum sii164_hot_plug_mode hot_plug_mode)
{
- unsigned char detectReg;
+ unsigned char detect_reg;
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) &
+ detect_reg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG;
- switch (hotPlugMode) {
+ switch (hot_plug_mode) {
case SII164_HOTPLUG_DISABLE:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH;
+ detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH;
break;
case SII164_HOTPLUG_USE_MDI:
- detectReg &= ~SII164_DETECT_INTERRUPT_MASK;
- detectReg |= SII164_DETECT_INTERRUPT_BY_HTPLG_PIN;
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI;
+ detect_reg &= ~SII164_DETECT_INTERRUPT_MASK;
+ detect_reg |= SII164_DETECT_INTERRUPT_BY_HTPLG_PIN;
+ detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI;
break;
case SII164_HOTPLUG_USE_RSEN:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN;
+ detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN;
break;
case SII164_HOTPLUG_USE_HTPLG:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG;
+ detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG;
break;
}
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_DETECT, detect_reg);
}
/*
- * sii164EnableHotPlugDetection
+ * sii164_enable_hot_plug_detection
* This function enables the Hot Plug detection.
*
- * enableHotPlug - Enable (=1) / disable (=0) Hot Plug detection
+ * enable_hot_plug - Enable (=1) / disable (=0) Hot Plug detection
*/
-void sii164EnableHotPlugDetection(unsigned char enableHotPlug)
+void sii164_enable_hot_plug_detection(unsigned char enable_hot_plug)
{
- unsigned char detectReg;
+ unsigned char detect_reg;
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
+ detect_reg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT);
/* Depending on each DVI controller, need to enable the hot plug based
* on each individual chip design.
*/
- if (enableHotPlug != 0)
- sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_USE_MDI);
+ if (enable_hot_plug != 0)
+ sii164_select_hot_plug_detection_mode(SII164_HOTPLUG_USE_MDI);
else
- sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_DISABLE);
+ sii164_select_hot_plug_detection_mode(SII164_HOTPLUG_DISABLE);
}
/*
- * sii164IsConnected
+ * sii164_is_connected
* Check if the DVI Monitor is connected.
*
* Output:
* 0 - Not Connected
* 1 - Connected
*/
-unsigned char sii164IsConnected(void)
+unsigned char sii164_is_connected(void)
{
- unsigned char hotPlugValue;
+ unsigned char hot_plug_value;
- hotPlugValue = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) &
+ hot_plug_value = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
SII164_DETECT_HOT_PLUG_STATUS_MASK;
- if (hotPlugValue == SII164_DETECT_HOT_PLUG_STATUS_ON)
+ if (hot_plug_value == SII164_DETECT_HOT_PLUG_STATUS_ON)
return 1;
else
return 0;
}
/*
- * sii164CheckInterrupt
+ * sii164_check_interrupt
* Checks if interrupt has occurred.
*
* Output:
* 0 - No interrupt
* 1 - Interrupt occurs
*/
-unsigned char sii164CheckInterrupt(void)
+unsigned char sii164_check_interrupt(void)
{
- unsigned char detectReg;
+ unsigned char detect_reg;
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) &
+ detect_reg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
SII164_DETECT_MONITOR_STATE_MASK;
- if (detectReg == SII164_DETECT_MONITOR_STATE_CHANGE)
+ if (detect_reg == SII164_DETECT_MONITOR_STATE_CHANGE)
return 1;
else
return 0;
}
/*
- * sii164ClearInterrupt
+ * sii164_clear_interrupt
* Clear the hot plug interrupt.
*/
-void sii164ClearInterrupt(void)
+void sii164_clear_interrupt(void)
{
- unsigned char detectReg;
+ unsigned char detect_reg;
/* Clear the MDI interrupt */
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT,
- detectReg | SII164_DETECT_MONITOR_STATE_CLEAR);
+ detect_reg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_DETECT,
+ detect_reg | SII164_DETECT_MONITOR_STATE_CLEAR);
}
#endif
diff --git a/drivers/staging/sm750fb/ddk750_sii164.h b/drivers/staging/sm750fb/ddk750_sii164.h
index d940cb729066..a414afbb719a 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.h
+++ b/drivers/staging/sm750fb/ddk750_sii164.h
@@ -16,28 +16,28 @@ enum sii164_hot_plug_mode {
};
/* Silicon Image SiI164 chip prototype */
-long sii164InitChip(unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue);
-
-unsigned short sii164GetVendorID(void);
-unsigned short sii164GetDeviceID(void);
+long sii164_init_chip(unsigned char edge_select,
+ unsigned char bus_select,
+ unsigned char dual_edge_clk_select,
+ unsigned char hsync_enable,
+ unsigned char vsync_enable,
+ unsigned char deskew_enable,
+ unsigned char deskew_setting,
+ unsigned char continuous_sync_enable,
+ unsigned char pll_filter_enable,
+ unsigned char pll_filter_value);
+
+unsigned short sii164_get_vendor_id(void);
+unsigned short sii164_get_device_id(void);
#ifdef SII164_FULL_FUNCTIONS
-void sii164ResetChip(void);
-char *sii164GetChipString(void);
-void sii164SetPower(unsigned char powerUp);
-void sii164EnableHotPlugDetection(unsigned char enableHotPlug);
-unsigned char sii164IsConnected(void);
-unsigned char sii164CheckInterrupt(void);
-void sii164ClearInterrupt(void);
+void sii164_reset_chip(void);
+char *sii164_get_chip_string(void);
+void sii164_set_power(unsigned char power_up);
+void sii164_enable_hot_plug_detection(unsigned char enable_hot_plug);
+unsigned char sii164_is_connected(void);
+unsigned char sii164_check_interrupt(void);
+void sii164_clear_interrupt(void);
#endif
/*
* below register definition is used for
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index c237a8f8eb59..9d642e8986a4 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -112,20 +112,20 @@ static int lynxfb_ops_cursor(struct fb_info *info, struct fb_cursor *fbcursor)
crtc = &par->crtc;
cursor = &crtc->cursor;
- if (fbcursor->image.width > cursor->maxW ||
- fbcursor->image.height > cursor->maxH ||
+ if (fbcursor->image.width > cursor->max_w ||
+ fbcursor->image.height > cursor->max_h ||
fbcursor->image.depth > 1) {
return -ENXIO;
}
sm750_hw_cursor_disable(cursor);
if (fbcursor->set & FB_CUR_SETSIZE)
- sm750_hw_cursor_setSize(cursor,
+ sm750_hw_cursor_set_size(cursor,
fbcursor->image.width,
fbcursor->image.height);
if (fbcursor->set & FB_CUR_SETPOS)
- sm750_hw_cursor_setPos(cursor,
+ sm750_hw_cursor_set_pos(cursor,
fbcursor->image.dx - info->var.xoffset,
fbcursor->image.dy - info->var.yoffset);
@@ -141,11 +141,11 @@ static int lynxfb_ops_cursor(struct fb_info *info, struct fb_cursor *fbcursor)
((info->cmap.green[fbcursor->image.bg_color] & 0xfc00) >> 5) |
((info->cmap.blue[fbcursor->image.bg_color] & 0xf800) >> 11);
- sm750_hw_cursor_setColor(cursor, fg, bg);
+ sm750_hw_cursor_set_color(cursor, fg, bg);
}
if (fbcursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE)) {
- sm750_hw_cursor_setData(cursor,
+ sm750_hw_cursor_set_data(cursor,
fbcursor->rop,
fbcursor->image.data,
fbcursor->mask);
@@ -162,7 +162,7 @@ static void lynxfb_ops_fillrect(struct fb_info *info,
{
struct lynxfb_par *par;
struct sm750_dev *sm750_dev;
- unsigned int base, pitch, Bpp, rop;
+ unsigned int base, pitch, bpp, rop;
u32 color;
if (info->state != FBINFO_STATE_RUNNING)
@@ -175,11 +175,11 @@ static void lynxfb_ops_fillrect(struct fb_info *info,
* each time 2d function begin to work,below three variable always need
* be set, seems we can put them together in some place
*/
- base = par->crtc.oScreen;
+ base = par->crtc.o_screen;
pitch = info->fix.line_length;
- Bpp = info->var.bits_per_pixel >> 3;
+ bpp = info->var.bits_per_pixel >> 3;
- color = (Bpp == 1) ? region->color :
+ color = (bpp == 1) ? region->color :
((u32 *)info->pseudo_palette)[region->color];
rop = (region->rop != ROP_COPY) ? HW_ROP2_XOR : HW_ROP2_COPY;
@@ -192,7 +192,7 @@ static void lynxfb_ops_fillrect(struct fb_info *info,
spin_lock(&sm750_dev->slock);
sm750_dev->accel.de_fillrect(&sm750_dev->accel,
- base, pitch, Bpp,
+ base, pitch, bpp,
region->dx, region->dy,
region->width, region->height,
color, rop);
@@ -204,7 +204,7 @@ static void lynxfb_ops_copyarea(struct fb_info *info,
{
struct lynxfb_par *par;
struct sm750_dev *sm750_dev;
- unsigned int base, pitch, Bpp;
+ unsigned int base, pitch, bpp;
par = info->par;
sm750_dev = par->dev;
@@ -213,9 +213,9 @@ static void lynxfb_ops_copyarea(struct fb_info *info,
* each time 2d function begin to work,below three variable always need
* be set, seems we can put them together in some place
*/
- base = par->crtc.oScreen;
+ base = par->crtc.o_screen;
pitch = info->fix.line_length;
- Bpp = info->var.bits_per_pixel >> 3;
+ bpp = info->var.bits_per_pixel >> 3;
/*
* If not use spin_lock, system will die if user load driver
@@ -227,7 +227,7 @@ static void lynxfb_ops_copyarea(struct fb_info *info,
sm750_dev->accel.de_copyarea(&sm750_dev->accel,
base, pitch, region->sx, region->sy,
- base, pitch, Bpp, region->dx, region->dy,
+ base, pitch, bpp, region->dx, region->dy,
region->width, region->height,
HW_ROP2_COPY);
spin_unlock(&sm750_dev->slock);
@@ -236,7 +236,7 @@ static void lynxfb_ops_copyarea(struct fb_info *info,
static void lynxfb_ops_imageblit(struct fb_info *info,
const struct fb_image *image)
{
- unsigned int base, pitch, Bpp;
+ unsigned int base, pitch, bpp;
unsigned int fgcol, bgcol;
struct lynxfb_par *par;
struct sm750_dev *sm750_dev;
@@ -247,9 +247,9 @@ static void lynxfb_ops_imageblit(struct fb_info *info,
* each time 2d function begin to work,below three variable always need
* be set, seems we can put them together in some place
*/
- base = par->crtc.oScreen;
+ base = par->crtc.o_screen;
pitch = info->fix.line_length;
- Bpp = info->var.bits_per_pixel >> 3;
+ bpp = info->var.bits_per_pixel >> 3;
/* TODO: Implement hardware acceleration for image->depth > 1 */
if (image->depth != 1) {
@@ -276,7 +276,7 @@ static void lynxfb_ops_imageblit(struct fb_info *info,
sm750_dev->accel.de_imageblit(&sm750_dev->accel,
image->data, image->width >> 3, 0,
- base, pitch, Bpp,
+ base, pitch, bpp,
image->dx, image->dy,
image->width, image->height,
fgcol, bgcol, HW_ROP2_COPY);
@@ -393,9 +393,9 @@ static int lynxfb_ops_set_par(struct fb_info *info)
pr_err("bpp %d not supported\n", var->bits_per_pixel);
return ret;
}
- ret = hw_sm750_crtc_setMode(crtc, var, fix);
+ ret = hw_sm750_crtc_set_mode(crtc, var, fix);
if (!ret)
- ret = hw_sm750_output_setMode(output, var, fix);
+ ret = hw_sm750_output_set_mode(output, var, fix);
return ret;
}
@@ -451,7 +451,7 @@ static int __maybe_unused lynxfb_resume(struct device *dev)
crtc = &par->crtc;
cursor = &crtc->cursor;
memset_io(cursor->vstart, 0x0, cursor->size);
- memset_io(crtc->vScreen, 0x0, crtc->vidmem_size);
+ memset_io(crtc->v_screen, 0x0, crtc->vidmem_size);
lynxfb_ops_set_par(info);
fb_set_suspend(info, 0);
}
@@ -463,7 +463,7 @@ static int __maybe_unused lynxfb_resume(struct device *dev)
crtc = &par->crtc;
cursor = &crtc->cursor;
memset_io(cursor->vstart, 0x0, cursor->size);
- memset_io(crtc->vScreen, 0x0, crtc->vidmem_size);
+ memset_io(crtc->v_screen, 0x0, crtc->vidmem_size);
lynxfb_ops_set_par(info);
fb_set_suspend(info, 0);
}
@@ -512,7 +512,7 @@ static int lynxfb_ops_check_var(struct fb_var_screeninfo *var,
return -ENOMEM;
}
- return hw_sm750_crtc_checkMode(crtc, var);
+ return hw_sm750_crtc_check_mode(crtc, var);
}
static int lynxfb_ops_setcolreg(unsigned int regno,
@@ -545,7 +545,7 @@ static int lynxfb_ops_setcolreg(unsigned int regno,
red >>= 8;
green >>= 8;
blue >>= 8;
- ret = hw_sm750_setColReg(crtc, regno, red, green, blue);
+ ret = hw_sm750_set_col_reg(crtc, regno, red, green, blue);
goto exit;
}
@@ -577,7 +577,7 @@ static int lynxfb_ops_blank(int blank, struct fb_info *info)
pr_debug("blank = %d.\n", blank);
par = info->par;
output = &par->output;
- return output->proc_setBLANK(output, blank);
+ return output->proc_set_blank(output, blank);
}
static int sm750fb_set_drv(struct lynxfb_par *par)
@@ -598,60 +598,60 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
crtc->vidmem_size >>= 1;
/* setup crtc and output member */
- sm750_dev->hwCursor = g_hwcursor;
+ sm750_dev->hw_cursor = g_hwcursor;
crtc->line_pad = 16;
crtc->xpanstep = 8;
crtc->ypanstep = 1;
crtc->ywrapstep = 0;
- output->proc_setBLANK = (sm750_dev->revid == SM750LE_REVISION_ID) ?
- hw_sm750le_setBLANK : hw_sm750_setBLANK;
+ output->proc_set_blank = (sm750_dev->revid == SM750LE_REVISION_ID) ?
+ hw_sm750le_set_blank : hw_sm750_set_blank;
/* chip specific phase */
sm750_dev->accel.de_wait = (sm750_dev->revid == SM750LE_REVISION_ID) ?
- hw_sm750le_deWait : hw_sm750_deWait;
+ hw_sm750le_de_wait : hw_sm750_de_wait;
switch (sm750_dev->dataflow) {
case sm750_simul_pri:
output->paths = sm750_pnc;
crtc->channel = sm750_primary;
- crtc->oScreen = 0;
- crtc->vScreen = sm750_dev->pvMem;
+ crtc->o_screen = 0;
+ crtc->v_screen = sm750_dev->pv_mem;
pr_info("use simul primary mode\n");
break;
case sm750_simul_sec:
output->paths = sm750_pnc;
crtc->channel = sm750_secondary;
- crtc->oScreen = 0;
- crtc->vScreen = sm750_dev->pvMem;
+ crtc->o_screen = 0;
+ crtc->v_screen = sm750_dev->pv_mem;
break;
case sm750_dual_normal:
if (par->index == 0) {
output->paths = sm750_panel;
crtc->channel = sm750_primary;
- crtc->oScreen = 0;
- crtc->vScreen = sm750_dev->pvMem;
+ crtc->o_screen = 0;
+ crtc->v_screen = sm750_dev->pv_mem;
} else {
output->paths = sm750_crt;
crtc->channel = sm750_secondary;
- /* not consider of padding stuffs for oScreen,need fix */
- crtc->oScreen = sm750_dev->vidmem_size >> 1;
- crtc->vScreen = sm750_dev->pvMem + crtc->oScreen;
+ /* not consider of padding stuffs for o_screen,need fix */
+ crtc->o_screen = sm750_dev->vidmem_size >> 1;
+ crtc->v_screen = sm750_dev->pv_mem + crtc->o_screen;
}
break;
case sm750_dual_swap:
if (par->index == 0) {
output->paths = sm750_panel;
crtc->channel = sm750_secondary;
- crtc->oScreen = 0;
- crtc->vScreen = sm750_dev->pvMem;
+ crtc->o_screen = 0;
+ crtc->v_screen = sm750_dev->pv_mem;
} else {
output->paths = sm750_crt;
crtc->channel = sm750_primary;
- /* not consider of padding stuffs for oScreen,
+ /* not consider of padding stuffs for o_screen,
* need fix
*/
- crtc->oScreen = sm750_dev->vidmem_size >> 1;
- crtc->vScreen = sm750_dev->pvMem + crtc->oScreen;
+ crtc->o_screen = sm750_dev->vidmem_size >> 1;
+ crtc->v_screen = sm750_dev->pv_mem + crtc->o_screen;
}
break;
default:
@@ -694,7 +694,7 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
"kernel HELPERS prepared vesa_modes",
};
- static const char *fixId[2] = {
+ static const char *fix_id[2] = {
"sm750_fb1", "sm750_fb2",
};
@@ -718,14 +718,14 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
* set current cursor variable and proc pointer,
* must be set after crtc member initialized
*/
- crtc->cursor.offset = crtc->oScreen + crtc->vidmem_size - 1024;
- crtc->cursor.mmio = sm750_dev->pvReg +
+ crtc->cursor.offset = crtc->o_screen + crtc->vidmem_size - 1024;
+ crtc->cursor.mmio = sm750_dev->pv_reg +
0x800f0 + (int)crtc->channel * 0x140;
pr_info("crtc->cursor.mmio = %p\n", crtc->cursor.mmio);
- crtc->cursor.maxH = crtc->cursor.maxW = 64;
- crtc->cursor.size = crtc->cursor.maxH * crtc->cursor.maxW * 2 / 8;
- crtc->cursor.vstart = sm750_dev->pvMem + crtc->cursor.offset;
+ crtc->cursor.max_h = crtc->cursor.max_w = 64;
+ crtc->cursor.size = crtc->cursor.max_h * crtc->cursor.max_w * 2 / 8;
+ crtc->cursor.vstart = sm750_dev->pv_mem + crtc->cursor.offset;
memset_io(crtc->cursor.vstart, 0, crtc->cursor.size);
if (!g_hwcursor) {
@@ -801,7 +801,7 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
crtc->line_pad);
info->pseudo_palette = &par->pseudo_palette[0];
- info->screen_base = crtc->vScreen;
+ info->screen_base = crtc->v_screen;
pr_debug("screen_base vaddr = %p\n", info->screen_base);
info->screen_size = line_length * var->yres_virtual;
info->flags = FBINFO_FLAG_DEFAULT | 0;
@@ -814,9 +814,9 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
fix->ywrapstep = crtc->ywrapstep;
fix->accel = FB_ACCEL_SMI;
- strscpy(fix->id, fixId[index], sizeof(fix->id));
+ strscpy(fix->id, fix_id[index], sizeof(fix->id));
- fix->smem_start = crtc->oScreen + sm750_dev->vidmem_start;
+ fix->smem_start = crtc->o_screen + sm750_dev->vidmem_start;
pr_info("fix->smem_start = %lx\n", fix->smem_start);
/*
* according to mmap experiment from user space application,
@@ -870,12 +870,12 @@ static void sm750fb_setup(struct sm750_dev *sm750_dev, char *src)
swap = 0;
- sm750_dev->initParm.chip_clk = 0;
- sm750_dev->initParm.mem_clk = 0;
- sm750_dev->initParm.master_clk = 0;
- sm750_dev->initParm.powerMode = 0;
- sm750_dev->initParm.setAllEngOff = 0;
- sm750_dev->initParm.resetMemory = 1;
+ sm750_dev->init_param.chip_clk = 0;
+ sm750_dev->init_param.mem_clk = 0;
+ sm750_dev->init_param.master_clk = 0;
+ sm750_dev->init_param.power_mode = 0;
+ sm750_dev->init_param.set_all_eng_off = 0;
+ sm750_dev->init_param.reset_memory = 1;
/* defaultly turn g_hwcursor on for both view */
g_hwcursor = 3;
@@ -894,9 +894,9 @@ static void sm750fb_setup(struct sm750_dev *sm750_dev, char *src)
} else if (!strncmp(opt, "nocrt", strlen("nocrt"))) {
sm750_dev->nocrt = 1;
} else if (!strncmp(opt, "36bit", strlen("36bit"))) {
- sm750_dev->pnltype = sm750_doubleTFT;
+ sm750_dev->pnltype = sm750_double_tft;
} else if (!strncmp(opt, "18bit", strlen("18bit"))) {
- sm750_dev->pnltype = sm750_dualTFT;
+ sm750_dev->pnltype = sm750_dual_tft;
} else if (!strncmp(opt, "24bit", strlen("24bit"))) {
sm750_dev->pnltype = sm750_24TFT;
} else if (!strncmp(opt, "nohwc0", strlen("nohwc0"))) {
@@ -1061,7 +1061,7 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
sm750_dev->mtrr.vram = arch_phys_wc_add(sm750_dev->vidmem_start,
sm750_dev->vidmem_size);
- memset_io(sm750_dev->pvMem, 0, sm750_dev->vidmem_size);
+ memset_io(sm750_dev->pv_mem, 0, sm750_dev->vidmem_size);
pci_set_drvdata(pdev, sm750_dev);
@@ -1092,8 +1092,8 @@ static void lynxfb_pci_remove(struct pci_dev *pdev)
sm750fb_framebuffer_release(sm750_dev);
arch_phys_wc_del(sm750_dev->mtrr.vram);
- iounmap(sm750_dev->pvReg);
- iounmap(sm750_dev->pvMem);
+ iounmap(sm750_dev->pv_reg);
+ iounmap(sm750_dev->pv_mem);
kfree(g_settings);
}
diff --git a/drivers/staging/sm750fb/sm750.h b/drivers/staging/sm750fb/sm750.h
index 23eefd019ec9..b5b2d048e1a6 100644
--- a/drivers/staging/sm750fb/sm750.h
+++ b/drivers/staging/sm750fb/sm750.h
@@ -14,8 +14,8 @@
enum sm750_pnltype {
sm750_24TFT = 0, /* 24bit tft */
- sm750_dualTFT = 2, /* dual 18 bit tft */
- sm750_doubleTFT = 1, /* 36 bit double pixel tft */
+ sm750_dual_tft = 2, /* dual 18 bit tft */
+ sm750_double_tft = 1, /* 36 bit double pixel tft */
};
/* vga channel is not concerned */
@@ -39,20 +39,20 @@ enum sm750_path {
};
struct init_status {
- ushort powerMode;
+ ushort power_mode;
/* below three clocks are in unit of MHZ*/
ushort chip_clk;
ushort mem_clk;
ushort master_clk;
- ushort setAllEngOff;
- ushort resetMemory;
+ ushort set_all_eng_off;
+ ushort reset_memory;
};
struct lynx_accel {
/* base virtual address of DPR registers */
- volatile unsigned char __iomem *dprBase;
+ volatile unsigned char __iomem *dpr_base;
/* base virtual address of de data port */
- volatile unsigned char __iomem *dpPortBase;
+ volatile unsigned char __iomem *de_port_base;
/* function pointers */
void (*de_init)(struct lynx_accel *accel);
@@ -97,12 +97,12 @@ struct sm750_dev {
unsigned long vidreg_start;
__u32 vidmem_size;
__u32 vidreg_size;
- void __iomem *pvReg;
- unsigned char __iomem *pvMem;
+ void __iomem *pv_reg;
+ unsigned char __iomem *pv_mem;
/* locks*/
spinlock_t slock;
- struct init_status initParm;
+ struct init_status init_param;
enum sm750_pnltype pnltype;
enum sm750_dataflow dataflow;
int nocrt;
@@ -113,7 +113,7 @@ struct sm750_dev {
* 2: secondary crtc hw cursor enabled
* 3: both ctrc hw cursor enabled
*/
- int hwCursor;
+ int hw_cursor;
};
struct lynx_cursor {
@@ -122,8 +122,8 @@ struct lynx_cursor {
int h;
int size;
/* hardware limitation */
- int maxW;
- int maxH;
+ int max_w;
+ int max_h;
/* base virtual address and offset of cursor image */
char __iomem *vstart;
int offset;
@@ -132,10 +132,10 @@ struct lynx_cursor {
};
struct lynxfb_crtc {
- unsigned char __iomem *vCursor; /* virtual address of cursor */
- unsigned char __iomem *vScreen; /* virtual address of on_screen */
- int oCursor; /* cursor address offset in vidmem */
- int oScreen; /* onscreen address offset in vidmem */
+ unsigned char __iomem *v_cursor; /* virtual address of cursor */
+ unsigned char __iomem *v_screen; /* virtual address of on_screen */
+ int o_cursor; /* cursor address offset in vidmem */
+ int o_screen; /* onscreen address offset in vidmem */
int channel;/* which channel this crtc stands for*/
resource_size_t vidmem_size;/* this view's video memory max size */
@@ -170,7 +170,7 @@ struct lynxfb_output {
*/
void *priv;
- int (*proc_setBLANK)(struct lynxfb_output *output, int blank);
+ int (*proc_set_blank)(struct lynxfb_output *output, int blank);
};
struct lynxfb_par {
@@ -193,26 +193,26 @@ static inline unsigned long ps_to_hz(unsigned int psvalue)
int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev);
int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev);
-void hw_sm750_initAccel(struct sm750_dev *sm750_dev);
-int hw_sm750_deWait(void);
-int hw_sm750le_deWait(void);
+void hw_sm750_init_accel(struct sm750_dev *sm750_dev);
+int hw_sm750_de_wait(void);
+int hw_sm750le_de_wait(void);
-int hw_sm750_output_setMode(struct lynxfb_output *output,
+int hw_sm750_output_set_mode(struct lynxfb_output *output,
struct fb_var_screeninfo *var,
struct fb_fix_screeninfo *fix);
-int hw_sm750_crtc_checkMode(struct lynxfb_crtc *crtc,
+int hw_sm750_crtc_check_mode(struct lynxfb_crtc *crtc,
struct fb_var_screeninfo *var);
-int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
+int hw_sm750_crtc_set_mode(struct lynxfb_crtc *crtc,
struct fb_var_screeninfo *var,
struct fb_fix_screeninfo *fix);
-int hw_sm750_setColReg(struct lynxfb_crtc *crtc, ushort index,
+int hw_sm750_set_col_reg(struct lynxfb_crtc *crtc, ushort index,
ushort red, ushort green, ushort blue);
-int hw_sm750_setBLANK(struct lynxfb_output *output, int blank);
-int hw_sm750le_setBLANK(struct lynxfb_output *output, int blank);
+int hw_sm750_set_blank(struct lynxfb_output *output, int blank);
+int hw_sm750le_set_blank(struct lynxfb_output *output, int blank);
int hw_sm750_pan_display(struct lynxfb_crtc *crtc,
const struct fb_var_screeninfo *var,
const struct fb_info *info);
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 8faa601c700b..7b2944d38519 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -18,19 +18,19 @@
#include "sm750.h"
#include "sm750_accel.h"
-static inline void write_dpr(struct lynx_accel *accel, int offset, u32 regValue)
+static inline void write_dpr(struct lynx_accel *accel, int offset, u32 reg_value)
{
- writel(regValue, accel->dprBase + offset);
+ writel(reg_value, accel->dpr_base + offset);
}
static inline u32 read_dpr(struct lynx_accel *accel, int offset)
{
- return readl(accel->dprBase + offset);
+ return readl(accel->dpr_base + offset);
}
-static inline void write_dpPort(struct lynx_accel *accel, u32 data)
+static inline void write_dp_port(struct lynx_accel *accel, u32 data)
{
- writel(data, accel->dpPortBase);
+ writel(data, accel->de_port_base);
}
void sm750_hw_de_init(struct lynx_accel *accel)
@@ -86,11 +86,11 @@ void sm750_hw_set2dformat(struct lynx_accel *accel, int fmt)
}
int sm750_hw_fillrect(struct lynx_accel *accel,
- u32 base, u32 pitch, u32 Bpp,
+ u32 base, u32 pitch, u32 bpp,
u32 x, u32 y, u32 width, u32 height,
u32 color, u32 rop)
{
- u32 deCtrl;
+ u32 de_ctrl;
if (accel->de_wait() != 0) {
/*
@@ -103,14 +103,14 @@ int sm750_hw_fillrect(struct lynx_accel *accel,
write_dpr(accel, DE_WINDOW_DESTINATION_BASE, base); /* dpr40 */
write_dpr(accel, DE_PITCH,
- ((pitch / Bpp << DE_PITCH_DESTINATION_SHIFT) &
+ ((pitch / bpp << DE_PITCH_DESTINATION_SHIFT) &
DE_PITCH_DESTINATION_MASK) |
- (pitch / Bpp & DE_PITCH_SOURCE_MASK)); /* dpr10 */
+ (pitch / bpp & DE_PITCH_SOURCE_MASK)); /* dpr10 */
write_dpr(accel, DE_WINDOW_WIDTH,
- ((pitch / Bpp << DE_WINDOW_WIDTH_DST_SHIFT) &
+ ((pitch / bpp << DE_WINDOW_WIDTH_DST_SHIFT) &
DE_WINDOW_WIDTH_DST_MASK) |
- (pitch / Bpp & DE_WINDOW_WIDTH_SRC_MASK)); /* dpr44 */
+ (pitch / bpp & DE_WINDOW_WIDTH_SRC_MASK)); /* dpr44 */
write_dpr(accel, DE_FOREGROUND, color); /* DPR14 */
@@ -122,23 +122,23 @@ int sm750_hw_fillrect(struct lynx_accel *accel,
((width << DE_DIMENSION_X_SHIFT) & DE_DIMENSION_X_MASK) |
(height & DE_DIMENSION_Y_ET_MASK)); /* dpr8 */
- deCtrl = DE_CONTROL_STATUS | DE_CONTROL_LAST_PIXEL |
+ de_ctrl = DE_CONTROL_STATUS | DE_CONTROL_LAST_PIXEL |
DE_CONTROL_COMMAND_RECTANGLE_FILL | DE_CONTROL_ROP_SELECT |
(rop & DE_CONTROL_ROP_MASK); /* dpr0xc */
- write_dpr(accel, DE_CONTROL, deCtrl);
+ write_dpr(accel, DE_CONTROL, de_ctrl);
return 0;
}
/**
* sm750_hm_copyarea
- * @sBase: Address of source: offset in frame buffer
- * @sPitch: Pitch value of source surface in BYTE
+ * @s_base: Address of source: offset in frame buffer
+ * @s_pitch: Pitch value of source surface in BYTE
* @sx: Starting x coordinate of source surface
* @sy: Starting y coordinate of source surface
- * @dBase: Address of destination: offset in frame buffer
- * @dPitch: Pitch value of destination surface in BYTE
- * @Bpp: Color depth of destination surface
+ * @d_base: Address of destination: offset in frame buffer
+ * @d_pitch: Pitch value of destination surface in BYTE
+ * @bpp: Color depth of destination surface
* @dx: Starting x coordinate of destination surface
* @dy: Starting y coordinate of destination surface
* @width: width of rectangle in pixel value
@@ -146,21 +146,21 @@ int sm750_hw_fillrect(struct lynx_accel *accel,
* @rop2: ROP value
*/
int sm750_hw_copyarea(struct lynx_accel *accel,
- unsigned int sBase, unsigned int sPitch,
+ unsigned int s_base, unsigned int s_pitch,
unsigned int sx, unsigned int sy,
- unsigned int dBase, unsigned int dPitch,
- unsigned int Bpp, unsigned int dx, unsigned int dy,
+ unsigned int d_base, unsigned int d_pitch,
+ unsigned int bpp, unsigned int dx, unsigned int dy,
unsigned int width, unsigned int height,
unsigned int rop2)
{
- unsigned int nDirection, de_ctrl;
+ unsigned int n_direction, de_ctrl;
- nDirection = LEFT_TO_RIGHT;
+ n_direction = LEFT_TO_RIGHT;
/* Direction of ROP2 operation: 1 = Left to Right, (-1) = Right to Left */
de_ctrl = 0;
/* If source and destination are the same surface, need to check for overlay cases */
- if (sBase == dBase && sPitch == dPitch) {
+ if (s_base == d_base && s_pitch == d_pitch) {
/* Determine direction of operation */
if (sy < dy) {
/* +----------+
@@ -173,7 +173,7 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* +----------+
*/
- nDirection = BOTTOM_TO_TOP;
+ n_direction = BOTTOM_TO_TOP;
} else if (sy > dy) {
/* +----------+
* |D |
@@ -185,7 +185,7 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* +----------+
*/
- nDirection = TOP_TO_BOTTOM;
+ n_direction = TOP_TO_BOTTOM;
} else {
/* sy == dy */
@@ -198,7 +198,7 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* +------+---+------+
*/
- nDirection = RIGHT_TO_LEFT;
+ n_direction = RIGHT_TO_LEFT;
} else {
/* sx > dx */
@@ -210,12 +210,12 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* +------+---+------+
*/
- nDirection = LEFT_TO_RIGHT;
+ n_direction = LEFT_TO_RIGHT;
}
}
}
- if ((nDirection == BOTTOM_TO_TOP) || (nDirection == RIGHT_TO_LEFT)) {
+ if ((n_direction == BOTTOM_TO_TOP) || (n_direction == RIGHT_TO_LEFT)) {
sx += width - 1;
sy += height - 1;
dx += width - 1;
@@ -234,14 +234,14 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* It is an address offset (128 bit aligned)
* from the beginning of frame buffer.
*/
- write_dpr(accel, DE_WINDOW_SOURCE_BASE, sBase); /* dpr40 */
+ write_dpr(accel, DE_WINDOW_SOURCE_BASE, s_base); /* dpr40 */
/*
* 2D Destination Base.
* It is an address offset (128 bit aligned)
* from the beginning of frame buffer.
*/
- write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase); /* dpr44 */
+ write_dpr(accel, DE_WINDOW_DESTINATION_BASE, d_base); /* dpr44 */
/*
* Program pitch (distance between the 1st points of two adjacent lines).
@@ -249,9 +249,9 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* pixel values. Need Byte to pixel conversion.
*/
write_dpr(accel, DE_PITCH,
- ((dPitch / Bpp << DE_PITCH_DESTINATION_SHIFT) &
+ ((d_pitch / bpp << DE_PITCH_DESTINATION_SHIFT) &
DE_PITCH_DESTINATION_MASK) |
- (sPitch / Bpp & DE_PITCH_SOURCE_MASK)); /* dpr10 */
+ (s_pitch / bpp & DE_PITCH_SOURCE_MASK)); /* dpr10 */
/*
* Screen Window width in Pixels.
@@ -259,9 +259,9 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* for a given point.
*/
write_dpr(accel, DE_WINDOW_WIDTH,
- ((dPitch / Bpp << DE_WINDOW_WIDTH_DST_SHIFT) &
+ ((d_pitch / bpp << DE_WINDOW_WIDTH_DST_SHIFT) &
DE_WINDOW_WIDTH_DST_MASK) |
- (sPitch / Bpp & DE_WINDOW_WIDTH_SRC_MASK)); /* dpr3c */
+ (s_pitch / bpp & DE_WINDOW_WIDTH_SRC_MASK)); /* dpr3c */
if (accel->de_wait() != 0)
return -1;
@@ -277,14 +277,14 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
(height & DE_DIMENSION_Y_ET_MASK)); /* dpr08 */
de_ctrl = (rop2 & DE_CONTROL_ROP_MASK) | DE_CONTROL_ROP_SELECT |
- ((nDirection == RIGHT_TO_LEFT) ? DE_CONTROL_DIRECTION : 0) |
+ ((n_direction == RIGHT_TO_LEFT) ? DE_CONTROL_DIRECTION : 0) |
DE_CONTROL_COMMAND_BITBLT | DE_CONTROL_STATUS;
write_dpr(accel, DE_CONTROL, de_ctrl); /* dpr0c */
return 0;
}
-static unsigned int deGetTransparency(struct lynx_accel *accel)
+static unsigned int de_get_transparency(struct lynx_accel *accel)
{
unsigned int de_ctrl;
@@ -298,38 +298,38 @@ static unsigned int deGetTransparency(struct lynx_accel *accel)
/**
* sm750_hw_imageblit
- * @pSrcbuf: pointer to start of source buffer in system memory
- * @srcDelta: Pitch value (in bytes) of the source buffer, +ive means top down
+ * @p_src_buf: pointer to start of source buffer in system memory
+ * @src_delta: Pitch value (in bytes) of the source buffer, +ive means top down
* and -ive mean button up
- * @startBit: Mono data can start at any bit in a byte, this value should be
+ * @start_bit: Mono data can start at any bit in a byte, this value should be
* 0 to 7
- * @dBase: Address of destination: offset in frame buffer
- * @dPitch: Pitch value of destination surface in BYTE
- * @bytePerPixel: Color depth of destination surface
+ * @d_base: Address of destination: offset in frame buffer
+ * @d_pitch: Pitch value of destination surface in BYTE
+ * @byte_per_pixel: Color depth of destination surface
* @dx: Starting x coordinate of destination surface
* @dy: Starting y coordinate of destination surface
* @width: width of rectangle in pixel value
* @height: height of rectangle in pixel value
- * @fColor: Foreground color (corresponding to a 1 in the monochrome data
- * @bColor: Background color (corresponding to a 0 in the monochrome data
+ * @f_color: Foreground color (corresponding to a 1 in the monochrome data
+ * @b_color: Background color (corresponding to a 0 in the monochrome data
* @rop2: ROP value
*/
-int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
- u32 srcDelta, u32 startBit, u32 dBase, u32 dPitch,
- u32 bytePerPixel, u32 dx, u32 dy, u32 width,
- u32 height, u32 fColor, u32 bColor, u32 rop2)
+int sm750_hw_imageblit(struct lynx_accel *accel, const char *p_src_buf,
+ u32 src_delta, u32 start_bit, u32 d_base, u32 d_pitch,
+ u32 byte_per_pixel, u32 dx, u32 dy, u32 width,
+ u32 height, u32 f_color, u32 b_color, u32 rop2)
{
- unsigned int ulBytesPerScan;
- unsigned int ul4BytesPerScan;
- unsigned int ulBytesRemain;
+ unsigned int ul_bytes_per_scan;
+ unsigned int ul4_bytes_per_scan;
+ unsigned int ul_bytes_remain;
unsigned int de_ctrl = 0;
- unsigned char ajRemain[4];
+ unsigned char aj_remain[4];
int i, j;
- startBit &= 7; /* Just make sure the start bit is within legal range */
- ulBytesPerScan = (width + startBit + 7) / 8;
- ul4BytesPerScan = ulBytesPerScan & ~3;
- ulBytesRemain = ulBytesPerScan & 3;
+ start_bit &= 7; /* Just make sure the start bit is within legal range */
+ ul_bytes_per_scan = (width + start_bit + 7) / 8;
+ ul4_bytes_per_scan = ul_bytes_per_scan & ~3;
+ ul_bytes_remain = ul_bytes_per_scan & 3;
if (accel->de_wait() != 0)
return -1;
@@ -344,7 +344,7 @@ int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
* It is an address offset (128 bit aligned)
* from the beginning of frame buffer.
*/
- write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase);
+ write_dpr(accel, DE_WINDOW_DESTINATION_BASE, d_base);
/*
* Program pitch (distance between the 1st points of two adjacent
@@ -352,9 +352,9 @@ int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
* register uses pixel values. Need Byte to pixel conversion.
*/
write_dpr(accel, DE_PITCH,
- ((dPitch / bytePerPixel << DE_PITCH_DESTINATION_SHIFT) &
+ ((d_pitch / byte_per_pixel << DE_PITCH_DESTINATION_SHIFT) &
DE_PITCH_DESTINATION_MASK) |
- (dPitch / bytePerPixel & DE_PITCH_SOURCE_MASK)); /* dpr10 */
+ (d_pitch / byte_per_pixel & DE_PITCH_SOURCE_MASK)); /* dpr10 */
/*
* Screen Window width in Pixels.
@@ -362,17 +362,17 @@ int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
* in frame buffer for a given point.
*/
write_dpr(accel, DE_WINDOW_WIDTH,
- ((dPitch / bytePerPixel << DE_WINDOW_WIDTH_DST_SHIFT) &
+ ((d_pitch / byte_per_pixel << DE_WINDOW_WIDTH_DST_SHIFT) &
DE_WINDOW_WIDTH_DST_MASK) |
- (dPitch / bytePerPixel & DE_WINDOW_WIDTH_SRC_MASK));
+ (d_pitch / byte_per_pixel & DE_WINDOW_WIDTH_SRC_MASK));
/*
* Note: For 2D Source in Host Write, only X_K1_MONO field is needed,
* and Y_K2 field is not used.
- * For mono bitmap, use startBit for X_K1.
+ * For mono bitmap, use start_bit for X_K1.
*/
write_dpr(accel, DE_SOURCE,
- (startBit << DE_SOURCE_X_K1_SHIFT) &
+ (start_bit << DE_SOURCE_X_K1_SHIFT) &
DE_SOURCE_X_K1_MONO_MASK); /* dpr00 */
write_dpr(accel, DE_DESTINATION,
@@ -383,28 +383,28 @@ int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
((width << DE_DIMENSION_X_SHIFT) & DE_DIMENSION_X_MASK) |
(height & DE_DIMENSION_Y_ET_MASK)); /* dpr08 */
- write_dpr(accel, DE_FOREGROUND, fColor);
- write_dpr(accel, DE_BACKGROUND, bColor);
+ write_dpr(accel, DE_FOREGROUND, f_color);
+ write_dpr(accel, DE_BACKGROUND, b_color);
de_ctrl = (rop2 & DE_CONTROL_ROP_MASK) |
DE_CONTROL_ROP_SELECT | DE_CONTROL_COMMAND_HOST_WRITE |
DE_CONTROL_HOST | DE_CONTROL_STATUS;
- write_dpr(accel, DE_CONTROL, de_ctrl | deGetTransparency(accel));
+ write_dpr(accel, DE_CONTROL, de_ctrl | de_get_transparency(accel));
/* Write MONO data (line by line) to 2D Engine data port */
for (i = 0; i < height; i++) {
/* For each line, send the data in chunks of 4 bytes */
- for (j = 0; j < (ul4BytesPerScan / 4); j++)
- write_dpPort(accel, *(unsigned int *)(pSrcbuf + (j * 4)));
+ for (j = 0; j < (ul4_bytes_per_scan / 4); j++)
+ write_dp_port(accel, *(unsigned int *)(p_src_buf + (j * 4)));
- if (ulBytesRemain) {
- memcpy(ajRemain, pSrcbuf + ul4BytesPerScan,
- ulBytesRemain);
- write_dpPort(accel, *(unsigned int *)ajRemain);
+ if (ul_bytes_remain) {
+ memcpy(aj_remain, p_src_buf + ul4_bytes_per_scan,
+ ul_bytes_remain);
+ write_dp_port(accel, *(unsigned int *)aj_remain);
}
- pSrcbuf += srcDelta;
+ p_src_buf += src_delta;
}
return 0;
diff --git a/drivers/staging/sm750fb/sm750_accel.h b/drivers/staging/sm750fb/sm750_accel.h
index 2c79cb730a0a..d146b82818f1 100644
--- a/drivers/staging/sm750fb/sm750_accel.h
+++ b/drivers/staging/sm750fb/sm750_accel.h
@@ -190,19 +190,19 @@ void sm750_hw_set2dformat(struct lynx_accel *accel, int fmt);
void sm750_hw_de_init(struct lynx_accel *accel);
int sm750_hw_fillrect(struct lynx_accel *accel,
- u32 base, u32 pitch, u32 Bpp,
+ u32 base, u32 pitch, u32 bpp,
u32 x, u32 y, u32 width, u32 height,
u32 color, u32 rop);
/**
* sm750_hm_copyarea
- * @sBase: Address of source: offset in frame buffer
- * @sPitch: Pitch value of source surface in BYTE
+ * @s_base: Address of source: offset in frame buffer
+ * @s_pitch: Pitch value of source surface in BYTE
* @sx: Starting x coordinate of source surface
* @sy: Starting y coordinate of source surface
- * @dBase: Address of destination: offset in frame buffer
- * @dPitch: Pitch value of destination surface in BYTE
- * @Bpp: Color depth of destination surface
+ * @d_base: Address of destination: offset in frame buffer
+ * @d_pitch: Pitch value of destination surface in BYTE
+ * @bpp: Color depth of destination surface
* @dx: Starting x coordinate of destination surface
* @dy: Starting y coordinate of destination surface
* @width: width of rectangle in pixel value
@@ -210,34 +210,34 @@ int sm750_hw_fillrect(struct lynx_accel *accel,
* @rop2: ROP value
*/
int sm750_hw_copyarea(struct lynx_accel *accel,
- unsigned int sBase, unsigned int sPitch,
+ unsigned int s_base, unsigned int s_pitch,
unsigned int sx, unsigned int sy,
- unsigned int dBase, unsigned int dPitch,
- unsigned int Bpp, unsigned int dx, unsigned int dy,
+ unsigned int d_base, unsigned int d_pitch,
+ unsigned int bpp, unsigned int dx, unsigned int dy,
unsigned int width, unsigned int height,
unsigned int rop2);
/**
* sm750_hw_imageblit
- * @pSrcbuf: pointer to start of source buffer in system memory
- * @srcDelta: Pitch value (in bytes) of the source buffer, +ive means top down
+ * @p_src_buf: pointer to start of source buffer in system memory
+ * @src_delta: Pitch value (in bytes) of the source buffer, +ive means top down
*>----- and -ive mean button up
- * @startBit: Mono data can start at any bit in a byte, this value should be
+ * @start_bit: Mono data can start at any bit in a byte, this value should be
*>----- 0 to 7
- * @dBase: Address of destination: offset in frame buffer
- * @dPitch: Pitch value of destination surface in BYTE
- * @bytePerPixel: Color depth of destination surface
+ * @d_base: Address of destination: offset in frame buffer
+ * @d_pitch: Pitch value of destination surface in BYTE
+ * @byte_per_pixel: Color depth of destination surface
* @dx: Starting x coordinate of destination surface
* @dy: Starting y coordinate of destination surface
* @width: width of rectangle in pixel value
* @height: height of rectangle in pixel value
- * @fColor: Foreground color (corresponding to a 1 in the monochrome data
- * @bColor: Background color (corresponding to a 0 in the monochrome data
+ * @f_color: Foreground color (corresponding to a 1 in the monochrome data
+ * @b_color: Background color (corresponding to a 0 in the monochrome data
* @rop2: ROP value
*/
-int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
- u32 srcDelta, u32 startBit, u32 dBase, u32 dPitch,
- u32 bytePerPixel, u32 dx, u32 dy, u32 width,
- u32 height, u32 fColor, u32 bColor, u32 rop2);
+int sm750_hw_imageblit(struct lynx_accel *accel, const char *p_src_buf,
+ u32 src_delta, u32 start_bit, u32 d_base, u32 d_pitch,
+ u32 byte_per_pixel, u32 dx, u32 dy, u32 width,
+ u32 height, u32 f_color, u32 b_color, u32 rop2);
#endif
diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c
index bbbef27cb329..3ee3bf78f7a5 100644
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -58,13 +58,13 @@ void sm750_hw_cursor_disable(struct lynx_cursor *cursor)
poke32(HWC_ADDRESS, 0);
}
-void sm750_hw_cursor_setSize(struct lynx_cursor *cursor, int w, int h)
+void sm750_hw_cursor_set_size(struct lynx_cursor *cursor, int w, int h)
{
cursor->w = w;
cursor->h = h;
}
-void sm750_hw_cursor_setPos(struct lynx_cursor *cursor, int x, int y)
+void sm750_hw_cursor_set_pos(struct lynx_cursor *cursor, int x, int y)
{
u32 reg;
@@ -73,7 +73,7 @@ void sm750_hw_cursor_setPos(struct lynx_cursor *cursor, int x, int y)
poke32(HWC_LOCATION, reg);
}
-void sm750_hw_cursor_setColor(struct lynx_cursor *cursor, u32 fg, u32 bg)
+void sm750_hw_cursor_set_color(struct lynx_cursor *cursor, u32 fg, u32 bg)
{
u32 reg = (fg << HWC_COLOR_12_2_RGB565_SHIFT) &
HWC_COLOR_12_2_RGB565_MASK;
@@ -82,7 +82,7 @@ void sm750_hw_cursor_setColor(struct lynx_cursor *cursor, u32 fg, u32 bg)
poke32(HWC_COLOR_3, 0xffe0);
}
-void sm750_hw_cursor_setData(struct lynx_cursor *cursor, u16 rop,
+void sm750_hw_cursor_set_data(struct lynx_cursor *cursor, u16 rop,
const u8 *pcol, const u8 *pmsk)
{
int i, j, count, pitch, offset;
@@ -97,7 +97,7 @@ void sm750_hw_cursor_setData(struct lynx_cursor *cursor, u16 rop,
count = pitch * cursor->h;
/* in byte */
- offset = cursor->maxW * 2 / 8;
+ offset = cursor->max_w * 2 / 8;
data = 0;
pstart = cursor->vstart;
@@ -132,7 +132,7 @@ void sm750_hw_cursor_setData(struct lynx_cursor *cursor, u16 rop,
}
}
-void sm750_hw_cursor_setData2(struct lynx_cursor *cursor, u16 rop,
+void sm750_hw_cursor_set_data2(struct lynx_cursor *cursor, u16 rop,
const u8 *pcol, const u8 *pmsk)
{
int i, j, count, pitch, offset;
@@ -147,7 +147,7 @@ void sm750_hw_cursor_setData2(struct lynx_cursor *cursor, u16 rop,
count = pitch * cursor->h;
/* in byte */
- offset = cursor->maxW * 2 / 8;
+ offset = cursor->max_w * 2 / 8;
data = 0;
pstart = cursor->vstart;
diff --git a/drivers/staging/sm750fb/sm750_cursor.h b/drivers/staging/sm750fb/sm750_cursor.h
index b59643dd61ed..8a1e81b8248d 100644
--- a/drivers/staging/sm750fb/sm750_cursor.h
+++ b/drivers/staging/sm750fb/sm750_cursor.h
@@ -5,11 +5,11 @@
/* hw_cursor_xxx works for voyager,718 and 750 */
void sm750_hw_cursor_enable(struct lynx_cursor *cursor);
void sm750_hw_cursor_disable(struct lynx_cursor *cursor);
-void sm750_hw_cursor_setSize(struct lynx_cursor *cursor, int w, int h);
-void sm750_hw_cursor_setPos(struct lynx_cursor *cursor, int x, int y);
-void sm750_hw_cursor_setColor(struct lynx_cursor *cursor, u32 fg, u32 bg);
-void sm750_hw_cursor_setData(struct lynx_cursor *cursor, u16 rop,
+void sm750_hw_cursor_set_size(struct lynx_cursor *cursor, int w, int h);
+void sm750_hw_cursor_set_pos(struct lynx_cursor *cursor, int x, int y);
+void sm750_hw_cursor_set_color(struct lynx_cursor *cursor, u32 fg, u32 bg);
+void sm750_hw_cursor_set_data(struct lynx_cursor *cursor, u16 rop,
const u8 *data, const u8 *mask);
-void sm750_hw_cursor_setData2(struct lynx_cursor *cursor, u16 rop,
+void sm750_hw_cursor_set_data2(struct lynx_cursor *cursor, u16 rop,
const u8 *data, const u8 *mask);
#endif
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 7136d751cff5..dc95b3a62ec1 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -50,20 +50,20 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
}
/* now map mmio and vidmem */
- sm750_dev->pvReg = ioremap(sm750_dev->vidreg_start,
+ sm750_dev->pv_reg = ioremap(sm750_dev->vidreg_start,
sm750_dev->vidreg_size);
- if (!sm750_dev->pvReg) {
+ if (!sm750_dev->pv_reg) {
pr_err("mmio failed\n");
ret = -EFAULT;
goto exit;
} else {
- pr_info("mmio virtual addr = %p\n", sm750_dev->pvReg);
+ pr_info("mmio virtual addr = %p\n", sm750_dev->pv_reg);
}
- sm750_dev->accel.dprBase = sm750_dev->pvReg + DE_BASE_ADDR_TYPE1;
- sm750_dev->accel.dpPortBase = sm750_dev->pvReg + DE_PORT_ADDR_TYPE1;
+ sm750_dev->accel.dpr_base = sm750_dev->pv_reg + DE_BASE_ADDR_TYPE1;
+ sm750_dev->accel.de_port_base = sm750_dev->pv_reg + DE_PORT_ADDR_TYPE1;
- mmio750 = sm750_dev->pvReg;
+ mmio750 = sm750_dev->pv_reg;
sm750_set_chip_type(sm750_dev->devid, sm750_dev->revid);
sm750_dev->vidmem_start = pci_resource_start(pdev, 0);
@@ -78,14 +78,14 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
sm750_dev->vidmem_start, sm750_dev->vidmem_size);
/* reserve the vidmem space of smi adaptor */
- sm750_dev->pvMem = ioremap_wc(sm750_dev->vidmem_start,
+ sm750_dev->pv_mem = ioremap_wc(sm750_dev->vidmem_start,
sm750_dev->vidmem_size);
- if (!sm750_dev->pvMem) {
+ if (!sm750_dev->pv_mem) {
pr_err("Map video memory failed\n");
ret = -EFAULT;
goto exit;
} else {
- pr_info("video memory vaddr = %p\n", sm750_dev->pvMem);
+ pr_info("video memory vaddr = %p\n", sm750_dev->pv_mem);
}
exit:
return ret;
@@ -95,7 +95,7 @@ int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
{
struct init_status *parm;
- parm = &sm750_dev->initParm;
+ parm = &sm750_dev->init_param;
if (parm->chip_clk == 0)
parm->chip_clk = (sm750_get_chip_type() == SM750LE) ?
DEFAULT_SM750LE_CHIP_CLOCK :
@@ -106,7 +106,7 @@ int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
if (parm->master_clk == 0)
parm->master_clk = parm->chip_clk / 3;
- ddk750_init_hw((struct initchip_param *)&sm750_dev->initParm);
+ ddk750_init_hw((struct initchip_param *)&sm750_dev->init_param);
/* for sm718, open pci burst */
if (sm750_dev->devid == 0x718) {
poke32(SYSTEM_CTRL,
@@ -138,10 +138,10 @@ int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
switch (sm750_dev->pnltype) {
case sm750_24TFT:
break;
- case sm750_doubleTFT:
+ case sm750_double_tft:
val |= PANEL_DISPLAY_CTRL_DOUBLE_PIXEL;
break;
- case sm750_dualTFT:
+ case sm750_dual_tft:
val |= PANEL_DISPLAY_CTRL_DUAL_DISPLAY;
break;
}
@@ -175,12 +175,12 @@ int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
/* init 2d engine */
if (!sm750_dev->accel_off)
- hw_sm750_initAccel(sm750_dev);
+ hw_sm750_init_accel(sm750_dev);
return 0;
}
-int hw_sm750_output_setMode(struct lynxfb_output *output,
+int hw_sm750_output_set_mode(struct lynxfb_output *output,
struct fb_var_screeninfo *var,
struct fb_fix_screeninfo *fix)
{
@@ -221,7 +221,7 @@ int hw_sm750_output_setMode(struct lynxfb_output *output,
return ret;
}
-int hw_sm750_crtc_checkMode(struct lynxfb_crtc *crtc,
+int hw_sm750_crtc_check_mode(struct lynxfb_crtc *crtc,
struct fb_var_screeninfo *var)
{
struct sm750_dev *sm750_dev;
@@ -247,7 +247,7 @@ int hw_sm750_crtc_checkMode(struct lynxfb_crtc *crtc,
}
/* set the controller's mode for @crtc charged with @var and @fix parameters */
-int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
+int hw_sm750_crtc_set_mode(struct lynxfb_crtc *crtc,
struct fb_var_screeninfo *var,
struct fb_fix_screeninfo *fix)
{
@@ -305,7 +305,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
clock = SECONDARY_PLL;
pr_debug("Request pixel clock = %lu\n", modparm.pixel_clock);
- ret = ddk750_setModeTiming(&modparm, clock);
+ ret = ddk750_set_mode_timing(&modparm, clock);
if (ret) {
pr_err("Set mode timing failed\n");
goto exit;
@@ -314,7 +314,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
if (crtc->channel != sm750_secondary) {
/* set pitch, offset, width, start address, etc... */
poke32(PANEL_FB_ADDRESS,
- crtc->oScreen & PANEL_FB_ADDRESS_ADDRESS_MASK);
+ crtc->o_screen & PANEL_FB_ADDRESS_ADDRESS_MASK);
reg = var->xres * (var->bits_per_pixel >> 3);
/*
@@ -350,7 +350,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
poke32(PANEL_DISPLAY_CTRL, reg | (var->bits_per_pixel >> 4));
} else {
/* not implemented now */
- poke32(CRT_FB_ADDRESS, crtc->oScreen);
+ poke32(CRT_FB_ADDRESS, crtc->o_screen);
reg = var->xres * (var->bits_per_pixel >> 3);
/*
* crtc->channel is not equal to par->index on numeric,
@@ -372,7 +372,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
return ret;
}
-int hw_sm750_setColReg(struct lynxfb_crtc *crtc, ushort index,
+int hw_sm750_set_col_reg(struct lynxfb_crtc *crtc, ushort index,
ushort red, ushort green, ushort blue)
{
static unsigned int add[] = {PANEL_PALETTE_RAM, CRT_PALETTE_RAM};
@@ -382,7 +382,7 @@ int hw_sm750_setColReg(struct lynxfb_crtc *crtc, ushort index,
return 0;
}
-int hw_sm750le_setBLANK(struct lynxfb_output *output, int blank)
+int hw_sm750le_set_blank(struct lynxfb_output *output, int blank)
{
int dpms, crtdb;
@@ -423,7 +423,7 @@ int hw_sm750le_setBLANK(struct lynxfb_output *output, int blank)
return 0;
}
-int hw_sm750_setBLANK(struct lynxfb_output *output, int blank)
+int hw_sm750_set_blank(struct lynxfb_output *output, int blank)
{
unsigned int dpms, pps, crtdb;
@@ -476,7 +476,7 @@ int hw_sm750_setBLANK(struct lynxfb_output *output, int blank)
return 0;
}
-void hw_sm750_initAccel(struct sm750_dev *sm750_dev)
+void hw_sm750_init_accel(struct sm750_dev *sm750_dev)
{
u32 reg;
@@ -506,7 +506,7 @@ void hw_sm750_initAccel(struct sm750_dev *sm750_dev)
sm750_dev->accel.de_init(&sm750_dev->accel);
}
-int hw_sm750le_deWait(void)
+int hw_sm750le_de_wait(void)
{
int i = 0x10000000;
unsigned int mask = DE_STATE2_DE_STATUS_BUSY | DE_STATE2_DE_FIFO_EMPTY |
@@ -523,7 +523,7 @@ int hw_sm750le_deWait(void)
return -1;
}
-int hw_sm750_deWait(void)
+int hw_sm750_de_wait(void)
{
int i = 0x10000000;
unsigned int mask = SYSTEM_CTRL_DE_STATUS_BUSY |
@@ -554,7 +554,7 @@ int hw_sm750_pan_display(struct lynxfb_crtc *crtc,
total = var->yoffset * info->fix.line_length +
((var->xoffset * var->bits_per_pixel) >> 3);
- total += crtc->oScreen;
+ total += crtc->o_screen;
if (crtc->channel == sm750_primary) {
poke32(PANEL_FB_ADDRESS,
peek32(PANEL_FB_ADDRESS) |
--
2.30.2
