Re: [PATCH v3 1/8] dt-bindings: spi: Add STM32 OSPI controller

[Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>]

On Mo, 2025-02-10 at 14:18 +0100, patrice.chotard@xxxxxxxxxxx wrote:
> From: Patrice Chotard <patrice.chotard@xxxxxxxxxxx>
> 
> Add device tree bindings for the STM32 OSPI controller.
> 
> Main features of the Octo-SPI controller :
>   - support sNOR / sNAND / HyperRAM™ and HyperFlash™ devices.
>   - Three functional modes: indirect, automatic-status polling,
>     memory-mapped.
>   - Up to 4 Gbytes of external memory can be addressed in indirect
>     mode (per physical port and per CS), and up to 256 Mbytes in
>     memory-mapped mode (combined for both physical ports and per CS).
>   - Single-, dual-, quad-, and octal-SPI communication.
>   - Dual-quad communication.
>   - Single data rate (SDR) and double transfer rate (DTR).
>   - Maximum target frequency is 133 MHz for SDR and 133 MHz for DTR.
>   - Data strobe support.
>   - DMA channel for indirect mode.
>   - Double CS mapping that allows two external flash devices to be
>     addressed with a single OCTOSPI controller mapped on a single
>     OCTOSPI port.
> 
> Signed-off-by: Patrice Chotard <patrice.chotard@xxxxxxxxxxx>
> ---
>  .../bindings/spi/st,stm32mp25-ospi.yaml       | 105 ++++++++++++++++++
>  1 file changed, 105 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/st,stm32mp25-ospi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/spi/st,stm32mp25-ospi.yaml b/Documentation/devicetree/bindings/spi/st,stm32mp25-ospi.yaml
> new file mode 100644
> index 000000000000..5f276f27dc4c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/st,stm32mp25-ospi.yaml
> @@ -0,0 +1,105 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spi/st,stm32mp25-ospi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics STM32 Octal Serial Peripheral Interface (OSPI)
> +
> +maintainers:
> +  - Patrice Chotard <patrice.chotard@xxxxxxxxxxx>
> +
> +allOf:
> +  - $ref: spi-controller.yaml#
> +
> +properties:
> +  compatible:
> +    const: st,stm32mp25-ospi
> +
> +  reg:
> +    maxItems: 1
> +
> +  memory-region:
> +    description:
> +      Memory region to be used for memory-map read access.
> +      In memory-mapped mode, read access are performed from the memory
> +      device using the direct mapping.
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  resets:
> +    items:
> +      - description: phandle to OSPI block reset
> +      - description: phandle to delay block reset

Are you positive that these will only ever have to be reset together?
Otherwise I'd add a reset-names property just in case.

regards
Philipp