Re: [PATCH v3 0/3] spi: s3c64xx: add support exynos990-spi to new port config data

[Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>]

On 2/14/25 5:31 AM, Denzeel Oliva wrote:
> On Fri, Feb 14, 2025 at 04:33:40AM +0000, Denzeel Oliva wrote:
>> Changes in v3:
>> - Reordered fifo_depth handling in s3c64xx_spi_probe() so that the DT
>>   property takes precedence over the default value in port_config.
>>   This allows node-specific FIFO depths to be applied correctly while
>>   preserving a fallback.
> 
> Showing evidence:
> [    0.339111] s3c64xx-spi 10920000.spi: spi bus clock parent not specified, using clock at index 0 as parent
> [    0.339119] s3c64xx-spi 10920000.spi: number of chip select lines not specified, assuming 1 chip select line
> [    0.339467] s3c64xx-spi 10920000.spi: registered host spi0
> [    0.339589] s3c64xx-spi 10920000.spi: Samsung SoC SPI Driver loaded for Bus SPI-0 with 1 Targets attached
> [    0.339597] s3c64xx-spi 10920000.spi:        IOmem=[[mem 0x10920000-0x1092002f]]     FIFO 256bytes
> -------------------------------------------------------------------------------------------------------------
> [    0.587452] s3c64xx-spi 10650000.spi: spi bus clock parent not specified, using clock at index 0 as parent
> [    0.587462] s3c64xx-spi 10650000.spi: number of chip select lines not specified, assuming 1 chip select line
> [    0.587847] s3c64xx-spi 10650000.spi: registered host spi1
> [    0.587986] s3c64xx-spi 10650000.spi: Samsung SoC SPI Driver loaded for Bus SPI-1 with 1 Targets attached
> [    0.587997] s3c64xx-spi 10650000.spi:        IOmem=[[mem 0x10650000-0x1065002f]]     FIFO 64bytes
> 

Why does this prove that the IP works?

Can you do a loopback test? See drivers/spi/spi-loopback-test.c