Every ->exec_op() call correctly configures the spi bus speed to the maximum allowed frequency for the memory using the constant spi default parameter. Since we can now have per-operation constraints, let's use the value that comes from the spi-mem operation structure instead. In case there is no specific limitation for this operation, the default spi device value will be given anyway. The per-operation frequency capability is thus advertised to the spi-mem core. Cc: Han Xu <han.xu@xxxxxxx> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> --- drivers/spi/spi-fsl-qspi.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c index 9ec53bf0dda8ead27bc7a11a9bb09a08efe2ea05..355e6a39fb41896f460e2474a90b8f0b42068ff3 100644 --- a/drivers/spi/spi-fsl-qspi.c +++ b/drivers/spi/spi-fsl-qspi.c @@ -522,9 +522,10 @@ static void fsl_qspi_invalidate(struct fsl_qspi *q) qspi_writel(q, reg, q->iobase + QUADSPI_MCR); } -static void fsl_qspi_select_mem(struct fsl_qspi *q, struct spi_device *spi) +static void fsl_qspi_select_mem(struct fsl_qspi *q, struct spi_device *spi, + const struct spi_mem_op *op) { - unsigned long rate = spi->max_speed_hz; + unsigned long rate = op->max_freq; int ret; if (q->selected == spi_get_chipselect(spi, 0)) @@ -652,7 +653,7 @@ static int fsl_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) fsl_qspi_readl_poll_tout(q, base + QUADSPI_SR, (QUADSPI_SR_IP_ACC_MASK | QUADSPI_SR_AHB_ACC_MASK), 10, 1000); - fsl_qspi_select_mem(q, mem->spi); + fsl_qspi_select_mem(q, mem->spi, op); if (needs_amba_base_offset(q)) addr_offset = q->memmap_phy; @@ -839,6 +840,10 @@ static const struct spi_controller_mem_ops fsl_qspi_mem_ops = { .get_name = fsl_qspi_get_name, }; +static const struct spi_controller_mem_caps fsl_qspi_mem_caps = { + .per_op_freq = true, +}; + static int fsl_qspi_probe(struct platform_device *pdev) { struct spi_controller *ctlr; @@ -923,6 +928,7 @@ static int fsl_qspi_probe(struct platform_device *pdev) ctlr->bus_num = -1; ctlr->num_chipselect = 4; ctlr->mem_ops = &fsl_qspi_mem_ops; + ctlr->mem_caps = &fsl_qspi_mem_caps; fsl_qspi_default_setup(q); -- 2.47.0