Re: [PATCH v5 2/3] mips: dts: realtek: Add SPI NAND controller

[Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>]

Hi Thomas,

On 16/10/24 11:54, Chris Packham wrote:
> Add the SPI-NAND controller on the RTL9300 family of devices. This
> supports serial/dual/quad data width and DMA for read/program
> operations.
>
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>

Has this one fallen through the cracks?

I see you picked up a couple of my other changes for 6.13 but this seems 
to be missing from mips/linux.

> ---
>
> Notes:
>      Changes in v4 & v5:
>      - none
>      Changes in v3:
>      - drop wildcard rtl9300-snand compatible
>      - drop clock-names
>      Changes in v2:
>      - Add clocks
>
>   arch/mips/boot/dts/realtek/rtl930x.dtsi | 13 +++++++++++++
>   1 file changed, 13 insertions(+)
>
> diff --git a/arch/mips/boot/dts/realtek/rtl930x.dtsi b/arch/mips/boot/dts/realtek/rtl930x.dtsi
> index f271940f82be..b01a40ec3064 100644
> --- a/arch/mips/boot/dts/realtek/rtl930x.dtsi
> +++ b/arch/mips/boot/dts/realtek/rtl930x.dtsi
> @@ -32,6 +32,8 @@ lx_clk: clock-175mhz {
>   };
>   
>   &soc {
> +	ranges = <0x0 0x18000000 0x20000>;
> +
>   	intc: interrupt-controller@3000 {
>   		compatible = "realtek,rtl9300-intc", "realtek,rtl-intc";
>   		reg = <0x3000 0x18>, <0x3018 0x18>;
> @@ -59,6 +61,17 @@ timer0: timer@3200 {
>   		interrupts = <7>, <8>, <9>, <10>, <11>;
>   		clocks = <&lx_clk>;
>   	};
> +
> +	snand: spi@1a400 {
> +		compatible = "realtek,rtl9301-snand";
> +		reg = <0x1a400 0x44>;
> +		interrupt-parent = <&intc>;
> +		interrupts = <19>;
> +		clocks = <&lx_clk>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		status = "disabled";
> +	};
>   };
>   
>   &uart0 {