(resend as plaintext)
Hi,
I recently added support for the SPI-NAND controller on the RTL9302C
SoC[1]. I did most of the work against Linux 6.11 and it's working fine
there. I recently rebased against the tip of Linus's tree (6.12-rc5) and
found I was getting ubifs errors when mounting:
[ 1.255191] spi-nand spi1.0: Macronix SPI NAND was found.
[ 1.261283] spi-nand spi1.0: 256 MiB, block size: 128 KiB, page size:
2048, OOB size: 64
[ 1.271134] 2 fixed-partitions partitions found on MTD device spi1.0
[ 1.278247] Creating 2 MTD partitions on "spi1.0":
[ 1.283631] 0x000000000000-0x00000f000000 : "user"
[ 20.481108] 0x00000f000000-0x000010000000 : "Reserved"
[ 72.240347] ubi0: scanning is finished
[ 72.270577] ubi0: attached mtd3 (name "user", size 240 MiB)
[ 72.276815] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976
bytes
[ 72.284537] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 72.292132] ubi0: VID header offset: 2048 (aligned 2048), data
offset: 4096
[ 72.299885] ubi0: good PEBs: 1920, bad PEBs: 0, corrupted PEBs: 0
[ 72.306689] ubi0: user volume: 1, internal volumes: 1, max. volumes
count: 128
[ 72.314747] ubi0: max/mean erase counter: 1/0, WL threshold: 4096,
image sequence number: 252642230
[ 72.324850] ubi0: available PEBs: 0, total reserved PEBs: 1920, PEBs
reserved for bad PEB handling: 40
[ 72.370123] ubi0: background thread "ubi_bgt0d" started, PID 141
[ 72.470740] UBIFS (ubi0:0): Mounting in unauthenticated mode
[ 72.490246] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started,
PID 144
[ 72.528272] UBIFS error (ubi0:0 pid 143): ubifs_recover_master_node:
failed to recover master node
[ 72.550122] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops
[ 72.710720] UBIFS (ubi0:0): Mounting in unauthenticated mode
[ 72.717447] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started,
PID 149
[ 72.777602] UBIFS error (ubi0:0 pid 148): ubifs_recover_master_node:
failed to recover master node
[ 72.787792] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops
Full dmesg output is at[2]
git bisect lead me to commit 11813857864f ("mtd: spi-nand: macronix:
Continuous read support"). Reverting the blamed commit from 6.12-rc5
seems to avoid the problem. The flash chip on my board is a
MX30LF2G28AD-TI. I'm not sure if there is a problem with 11813857864f or
with my spi-mem driver that is exposed after support for continuous read
is enabled.
Thanks,
Chris
--
[1] -
https://lore.kernel.org/all/20241015225434.3970360-1-chris.packham@xxxxxxxxxxxxxxxxxxx/
[2] -
https://gist.github.com/cpackham-atlnz/66a0843362e8f8eb2c4f5c7ed01c5efe
