Hello: The following patches were marked "accepted", because they were applied to broonie/spi.git (for-next): Series: Marvell HW overlay support for Cadence xSPI Submitter: Witold Sadowski <wsadowski@xxxxxxxxxxx> Committer: Mark Brown <broonie@xxxxxxxxxx> Patchwork: https://patchwork.kernel.org/project/spi-devel-general/list/?series=873580 Lore link: https://lore.kernel.org/r/20240724154739.582367-1-wsadowski@xxxxxxxxxxx Patches: [v11,1/9] spi: dt-bindings: cadence: Add Marvell overlay bindings documentation for Cadence XSPI [v11,2/9] spi: cadence: Add static PHY configuration in Marvell overlay [v11,3/9] spi: cadence: Add clock configuration for Marvell xSPI overlay [v11,4/9] spi: cadence: Add Marvell SDMA operations [v11,5/9] spi: cadence: Add Marvell xSPI interrupt changes [v11,6/9] spi: cadence: Add Marvell xfer operation support [v11,7/9] spi: cadence: Change resource mapping [v11,8/9] spi: cadence: Change cs property reading. [v11,9/9] spi: cadence: Try to read spi-tx/rx-bus width property using ACPI Series: Add support for AD4000 series of ADCs Submitter: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx> Committer: Mark Brown <broonie@xxxxxxxxxx> Patchwork: https://patchwork.kernel.org/project/spi-devel-general/list/?series=870940 Lore link: https://lore.kernel.org/r/cover.1720810545.git.marcelo.schmitt@xxxxxxxxxx Patches: [v7,1/7] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration [v7,2/7] spi: bitbang: Implement support for MOSI idle state configuration [v7,3/7] spi: spi-gpio: Add support for MOSI idle state configuration [v7,4/7] spi: spi-axi-spi-engine: Add support for MOSI idle configuration [v7,5/7] dt-bindings: iio: adc: Add AD4000 Total patches: 14 -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html