From: Benjamin Szőke <egyszeregy@xxxxxxxxxxx> Optionally, spidev may have a "linux,spidev-name" property. This is a string which is defining a custom suffix name for spi device in /dev/spidev-<name> format. It helps to improve software portability between various SoCs and reduce complexities of hardware related codes in SWs. Signed-off-by: Benjamin Szőke <egyszeregy@xxxxxxxxxxx> --- drivers/spi/spidev.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 95fb5f1c91c1..e0071522fc6d 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -767,6 +767,8 @@ MODULE_DEVICE_TABLE(acpi, spidev_acpi_ids); static int spidev_probe(struct spi_device *spi) { + int ret; + const char *name; int (*match)(struct device *dev); struct spidev_data *spidev; int status; @@ -800,9 +802,20 @@ static int spidev_probe(struct spi_device *spi) struct device *dev; spidev->devt = MKDEV(SPIDEV_MAJOR, minor); - dev = device_create(&spidev_class, &spi->dev, spidev->devt, - spidev, "spidev%d.%d", - spi->controller->bus_num, spi_get_chipselect(spi, 0)); + + /* + * If "linux,spidev-name" is specified in device tree, use /dev/spidev-<name> + * in Linux userspace, otherwise use /dev/spidev<bus_num>.<cs_num>. + */ + ret = device_property_read_string(&spi->dev, "linux,spidev-name", &name); + if (ret < 0) + dev = device_create(spidev_class, &spi->dev, spidev->devt, + spidev, "spidev%d.%d", + spi->controller->bus_num, spi_get_chipselect(spi, 0)); + else + dev = device_create(spidev_class, &spi->dev, spidev->devt, + spidev, "spidev-%s", name); + status = PTR_ERR_OR_ZERO(dev); } else { dev_dbg(&spi->dev, "no minor number available!\n"); -- 2.39.3