[PATCH v3 31/40] i2c: fsi: Add boolean for skip stop command on abort

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In preparation for interrupt support, store whether to skip the
final stop command during the abort procedure instead of checking
the previously read status register in the abort function.

Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-fsi.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c
index 022f1287aa0e3..614d830419bb8 100644
--- a/drivers/i2c/busses/i2c-fsi.c
+++ b/drivers/i2c/busses/i2c-fsi.c
@@ -116,6 +116,9 @@
 #define I2C_STAT_ANY_RESP	(I2C_STAT_ERR |				\
 				 I2C_STAT_DAT_REQ |			\
 				 I2C_STAT_CMD_COMP)
+#define I2C_STAT_SKIP_STOP	(I2C_STAT_PARITY |			\
+				 I2C_STAT_LOST_ARB |			\
+				 I2C_STAT_STOP_ERR)
 
 /* extended status register */
 #define I2C_ESTAT_FIFO_SZ	GENMASK(31, 24)
@@ -150,6 +153,7 @@ struct fsi_i2c_master {
 	struct mutex		lock;
 	u32			clock_div;
 	u8			fifo_size;
+	bool			skip_stop;
 };
 
 struct fsi_i2c_port {
@@ -459,31 +463,30 @@ static int fsi_i2c_reset_engine(struct fsi_i2c_master *i2c, u16 port)
 	return 0;
 }
 
-static int fsi_i2c_abort(struct fsi_i2c_port *port, u32 status)
+static int fsi_i2c_abort(struct fsi_i2c_port *port)
 {
 	struct fsi_i2c_master *i2c = port->master;
 	u32 cmd = I2C_CMD_WITH_STOP;
 	unsigned long start;
-	u32 stat;
+	u32 status;
 	int rc;
 
 	rc = fsi_i2c_reset_engine(i2c, port->port);
 	if (rc)
 		return rc;
 
-	rc = fsi_i2c_read_reg(i2c->fsi, I2C_FSI_STAT, &stat);
+	rc = fsi_i2c_read_reg(i2c->fsi, I2C_FSI_STAT, &status);
 	if (rc)
 		return rc;
 
 	/* if sda is low, peform full bus reset */
-	if (!(stat & I2C_STAT_SDA_IN)) {
+	if (!(status & I2C_STAT_SDA_IN)) {
 		rc = fsi_i2c_reset_bus(i2c, port);
 		if (rc)
 			return rc;
 	}
 
-	/* skip final stop command for these errors */
-	if (status & (I2C_STAT_PARITY | I2C_STAT_LOST_ARB | I2C_STAT_STOP_ERR))
+	if (i2c->skip_stop)
 		return 0;
 
 	/* write stop command */
@@ -534,7 +537,8 @@ static int fsi_i2c_handle_status(struct fsi_i2c_port *port,
 	int rc;
 
 	if (status & I2C_STAT_ERR) {
-		rc = fsi_i2c_abort(port, status);
+		port->master->skip_stop = status & I2C_STAT_SKIP_STOP;
+		rc = fsi_i2c_abort(port);
 		if (rc)
 			return rc;
 
-- 
2.39.3





[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux