[PATCH v1] spi: microchip-core-qspi: fix setting spi bus clock rate

[Conor Dooley <conor@xxxxxxxxxx>]

From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>

Before ORing the new clock rate with the control register value read
from the hardware, the existing clock rate needs to be masked off as
otherwise the existing value will interfere with the new one.

CC: stable@xxxxxxxxxxxxxxx
Fixes: 8596124c4c1b ("spi: microchip-core-qspi: Add support for microchip fpga qspi controllers")
Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
CC: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
CC: Daire McNamara <daire.mcnamara@xxxxxxxxxxxxx>
CC: Naga Sureshkumar Relli <nagasuresh.relli@xxxxxxxxxxxxx>
CC: Mark Brown <broonie@xxxxxxxxxx>
CC: linux-spi@xxxxxxxxxxxxxxx
CC: linux-kernel@xxxxxxxxxxxxxxx
---
 drivers/spi/spi-microchip-core-qspi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-microchip-core-qspi.c b/drivers/spi/spi-microchip-core-qspi.c
index 03d125a71fd9..09f16471c537 100644
--- a/drivers/spi/spi-microchip-core-qspi.c
+++ b/drivers/spi/spi-microchip-core-qspi.c
@@ -283,6 +283,7 @@ static int mchp_coreqspi_setup_clock(struct mchp_coreqspi *qspi, struct spi_devi
 	}
 
 	control = readl_relaxed(qspi->regs + REG_CONTROL);
+	control &= ~CONTROL_CLKRATE_MASK;
 	control |= baud_rate_val << CONTROL_CLKRATE_SHIFT;
 	writel_relaxed(control, qspi->regs + REG_CONTROL);
 	control = readl_relaxed(qspi->regs + REG_CONTROL);
-- 
2.43.0