[PATCH v1 1/1] spi: bitbang: Add missing MODULE_DESCRIPTION()

[Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>]

The modpost script is not happy

  WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spi/spi-bitbang.o

because there is a missing module description.

Add it to the module.

While at it, update the terminology in Kconfig section to be in align
with added description along with the code comments.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/spi/Kconfig       |  4 ++--
 drivers/spi/spi-bitbang.c | 18 +++++++++---------
 2 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 17325e0b7bd5..eb283824f174 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -216,11 +216,11 @@ config SPI_BCMBCA_HSSPI
 	  explicitly.
 
 config SPI_BITBANG
-	tristate "Utilities for Bitbanging SPI masters"
+	tristate "Utilities for Bitbanging SPI host controllers"
 	help
 	  With a few GPIO pins, your system can bitbang the SPI protocol.
 	  Select this to get SPI support through I/O pins (GPIO, parallel
-	  port, etc).  Or, some systems' SPI master controller drivers use
+	  port, etc).  Or, some systems' SPI host controller drivers use
 	  this code to manage the per-word or per-transfer accesses to the
 	  hardware shift registers.
 
diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index c11af39c9842..ca5cc67555c5 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * polling/bitbanging SPI master controller driver utilities
+ * Polling/bitbanging SPI host controller controller driver utilities
  */
 
 #include <linux/spinlock.h>
@@ -394,12 +394,12 @@ int spi_bitbang_init(struct spi_bitbang *bitbang)
 EXPORT_SYMBOL_GPL(spi_bitbang_init);
 
 /**
- * spi_bitbang_start - start up a polled/bitbanging SPI master driver
+ * spi_bitbang_start - start up a polled/bitbanging SPI host controller driver
  * @bitbang: driver handle
  *
  * Caller should have zero-initialized all parts of the structure, and then
- * provided callbacks for chip selection and I/O loops.  If the master has
- * a transfer method, its final step should call spi_bitbang_transfer; or,
+ * provided callbacks for chip selection and I/O loops.  If the host controller has
+ * a transfer method, its final step should call spi_bitbang_transfer(); or,
  * that's the default if the transfer routine is not initialized.  It should
  * also set up the bus number and number of chipselects.
  *
@@ -407,9 +407,9 @@ EXPORT_SYMBOL_GPL(spi_bitbang_init);
  * hardware that basically exposes a shift register) or per-spi_transfer
  * (which takes better advantage of hardware like fifos or DMA engines).
  *
- * Drivers using per-word I/O loops should use (or call) spi_bitbang_setup,
- * spi_bitbang_cleanup and spi_bitbang_setup_transfer to handle those spi
- * master methods.  Those methods are the defaults if the bitbang->txrx_bufs
+ * Drivers using per-word I/O loops should use (or call) spi_bitbang_setup(),
+ * spi_bitbang_cleanup() and spi_bitbang_setup_transfer() to handle those SPI
+ * host controller methods.  Those methods are the defaults if the bitbang->txrx_bufs
  * routine isn't initialized.
  *
  * This routine registers the spi_controller, which will process requests in a
@@ -418,7 +418,7 @@ EXPORT_SYMBOL_GPL(spi_bitbang_init);
  *
  * On success, this routine will take a reference to the controller. The caller
  * is responsible for calling spi_bitbang_stop() to decrement the reference and
- * spi_controller_put() as counterpart of spi_alloc_master() to prevent a memory
+ * spi_controller_put() as counterpart of spi_alloc_host() to prevent a memory
  * leak.
  */
 int spi_bitbang_start(struct spi_bitbang *bitbang)
@@ -451,4 +451,4 @@ void spi_bitbang_stop(struct spi_bitbang *bitbang)
 EXPORT_SYMBOL_GPL(spi_bitbang_stop);
 
 MODULE_LICENSE("GPL");
-
+MODULE_DESCRIPTION("Utilities for Bitbanging SPI host controllers");
-- 
2.43.0.rc1.1336.g36b5255a03ac