Re: [PATCH] spi: mt7621: allow GPIO chip select lines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Please ignore this patch. It was accidentally sent without
"v2" nor --in-reply-to=...


On 2024-03-16 02:59, Justin Swartz wrote:
Extract a magic number, from mt7621_spi_probe(), used to
declare the number of chip select lines (which co-incides
with the native chip select count of 2) to a macro.

Use the newly defined MT7621_NATIVE_CS_COUNT macro to
instead populate both the spi_controller's max_native_cs
and num_chipselect members.

Declare that the spi_controller should use_gpio_descriptors
if present in the device properties (such as those declared
in the cs-gpio property of a "ralink,mt7621-spi" compatible
device-tree node) so that the SPI core will recalculcate
num_chipselect to account for the GPIO descriptors that
it should have populated in the cs_gpiod array member.

Remove the assignment of mt7621_spi_transfer_one_message()
to the spi_controller's transfer_one_message hook.

Refactor the mt7621_spi_transfer_one_message() logic into
mt7621_spi_prepare_message() and mt7621_spi_transfer_one()
and assign both to the spi_controller's prepare_message
and transfer_one hooks respectively.

Migrate the call mt7621_spi_transfer_one_message() made to
mt7621_spi_flush() just before chip select deactivation,
to the end of mt7621_spi_write_half_duplex() to ensure
that any pending data is shifted out of MOSI before the SPI
core deactivates the chip select line.

As chip select activation is now taken care of by the SPI
core, due to the use of the transfer_one hook instead of
transfer_one_message, the calls to mt7621_spi_set_cs()
from mt7621_spi_transfer_one_message() have fallen away.

And although the SPI core will handle activation for GPIO
chip select lines behind the scenes, it requires a callback
to allow the driver to perform controller-specific
operations to control its native chip select lines.

Rename mt7621_spi_set_cs() to mt7621_spi_set_native_cs()
and make sure that it takes into account the activation
polarity of the chip select line it's acting upon, as the
passed enable parameter represents the desired line level
and not the desired activation state, and then assign
mt7621_set_cs() to the spi_controller's set_cs hook.

Signed-off-by: Justin Swartz <justin.swartz@xxxxxxxxxxxxxxxx>
---

Changes from v1 to v2:

  Mark Brown recommended using the transfer_one hook
  approach, so I did.


 drivers/spi/spi-mt7621.c | 95 +++++++++++++++++++---------------------
 1 file changed, 45 insertions(+), 50 deletions(-)

diff --git a/drivers/spi/spi-mt7621.c b/drivers/spi/spi-mt7621.c
index 4e9053d03..3770b8e09 100644
--- a/drivers/spi/spi-mt7621.c
+++ b/drivers/spi/spi-mt7621.c
@@ -52,6 +52,8 @@
 #define MT7621_CPOL		BIT(4)
 #define MT7621_LSB_FIRST	BIT(3)

+#define MT7621_NATIVE_CS_COUNT	2
+
 struct mt7621_spi {
 	struct spi_controller	*host;
 	void __iomem		*base;
@@ -75,10 +77,11 @@ static inline void mt7621_spi_write(struct
mt7621_spi *rs, u32 reg, u32 val)
 	iowrite32(val, rs->base + reg);
 }

-static void mt7621_spi_set_cs(struct spi_device *spi, int enable)
+static void mt7621_spi_set_native_cs(struct spi_device *spi, bool enable)
 {
 	struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
 	int cs = spi_get_chipselect(spi, 0);
+	bool active = spi->mode & SPI_CS_HIGH ? enable : !enable;
 	u32 polar = 0;
 	u32 host;

@@ -94,7 +97,7 @@ static void mt7621_spi_set_cs(struct spi_device
*spi, int enable)

 	rs->pending_write = 0;

-	if (enable)
+	if (active)
 		polar = BIT(cs);
 	mt7621_spi_write(rs, MT7621_SPI_POLAR, polar);
 }
@@ -154,6 +157,23 @@ static inline int
mt7621_spi_wait_till_ready(struct mt7621_spi *rs)
 	return -ETIMEDOUT;
 }

+static int mt7621_spi_prepare_message(struct spi_controller *host,
+				      struct spi_message *m)
+{
+	struct mt7621_spi *rs = spi_controller_get_devdata(host);
+	struct spi_device *spi = m->spi;
+	unsigned int speed = spi->max_speed_hz;
+	struct spi_transfer *t = NULL;
+
+	mt7621_spi_wait_till_ready(rs);
+
+	list_for_each_entry(t, &m->transfers, transfer_list)
+		if (t->speed_hz < speed)
+			speed = t->speed_hz;
+
+	return mt7621_spi_prepare(spi, speed);
+}
+
 static void mt7621_spi_read_half_duplex(struct mt7621_spi *rs,
 					int rx_len, u8 *buf)
 {
@@ -243,59 +263,30 @@ static void mt7621_spi_write_half_duplex(struct
mt7621_spi *rs,
 	}

 	rs->pending_write = len;
+	mt7621_spi_flush(rs);
 }

-static int mt7621_spi_transfer_one_message(struct spi_controller *host,
-					   struct spi_message *m)
+static int mt7621_spi_transfer_one(struct spi_controller *host,
+				   struct spi_device *spi,
+				   struct spi_transfer *t)
 {
 	struct mt7621_spi *rs = spi_controller_get_devdata(host);
-	struct spi_device *spi = m->spi;
-	unsigned int speed = spi->max_speed_hz;
-	struct spi_transfer *t = NULL;
-	int status = 0;
-
-	mt7621_spi_wait_till_ready(rs);

-	list_for_each_entry(t, &m->transfers, transfer_list)
-		if (t->speed_hz < speed)
-			speed = t->speed_hz;
-
-	if (mt7621_spi_prepare(spi, speed)) {
-		status = -EIO;
-		goto msg_done;
-	}
-
-	/* Assert CS */
-	mt7621_spi_set_cs(spi, 1);
-
-	m->actual_length = 0;
-	list_for_each_entry(t, &m->transfers, transfer_list) {
-		if ((t->rx_buf) && (t->tx_buf)) {
-			/*
-			 * This controller will shift some extra data out
-			 * of spi_opcode if (mosi_bit_cnt > 0) &&
-			 * (cmd_bit_cnt == 0). So the claimed full-duplex
-			 * support is broken since we have no way to read
-			 * the MISO value during that bit.
-			 */
-			status = -EIO;
-			goto msg_done;
-		} else if (t->rx_buf) {
-			mt7621_spi_read_half_duplex(rs, t->len, t->rx_buf);
-		} else if (t->tx_buf) {
-			mt7621_spi_write_half_duplex(rs, t->len, t->tx_buf);
-		}
-		m->actual_length += t->len;
+	if ((t->rx_buf) && (t->tx_buf)) {
+		/*
+		 * This controller will shift some extra data out
+		 * of spi_opcode if (mosi_bit_cnt > 0) &&
+		 * (cmd_bit_cnt == 0). So the claimed full-duplex
+		 * support is broken since we have no way to read
+		 * the MISO value during that bit.
+		 */
+		return -EIO;
+	} else if (t->rx_buf) {
+		mt7621_spi_read_half_duplex(rs, t->len, t->rx_buf);
+	} else if (t->tx_buf) {
+		mt7621_spi_write_half_duplex(rs, t->len, t->tx_buf);
 	}

-	/* Flush data and deassert CS */
-	mt7621_spi_flush(rs);
-	mt7621_spi_set_cs(spi, 0);
-
-msg_done:
-	m->status = status;
-	spi_finalize_current_message(host);
-
 	return 0;
 }

@@ -353,10 +344,14 @@ static int mt7621_spi_probe(struct platform_device *pdev)
 	host->mode_bits = SPI_LSB_FIRST;
 	host->flags = SPI_CONTROLLER_HALF_DUPLEX;
 	host->setup = mt7621_spi_setup;
-	host->transfer_one_message = mt7621_spi_transfer_one_message;
+	host->prepare_message = mt7621_spi_prepare_message;
+	host->set_cs = mt7621_spi_set_native_cs;
+	host->transfer_one = mt7621_spi_transfer_one;
 	host->bits_per_word_mask = SPI_BPW_MASK(8);
 	host->dev.of_node = pdev->dev.of_node;
-	host->num_chipselect = 2;
+	host->max_native_cs = MT7621_NATIVE_CS_COUNT;
+	host->num_chipselect = MT7621_NATIVE_CS_COUNT;
+	host->use_gpio_descriptors = true;

 	dev_set_drvdata(&pdev->dev, host);




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux