[PATCH v2 26/28] spi: s3c64xx: add iowrite{8,16}_32_rep accessors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There are SoCs that allow just 32 bit register accesses otherwise they
throw a SError interrupt if accessing the bus with 8 or 16 bits widths.
Such an SoC is the google gs101. Allow such SoCs to use the
iowrite{8,16}_32_rep accessors.

Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
---
 drivers/spi/spi-s3c64xx.c | 46 +++++++++++++++++++++++++++------------
 1 file changed, 32 insertions(+), 14 deletions(-)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index fa70c6aab7c2..35a2d5554dfd 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -139,6 +139,7 @@ struct s3c64xx_spi_dma_data {
  *	prescaler unit.
  * @clk_ioclk: True if clock is present on this device
  * @has_loopback: True if loopback mode can be supported
+ * @use_32bit_io: True if the SoC allows just 32-bit register accesses.
  *
  * The Samsung s3c64xx SPI controller are used on various Samsung SoC's but
  * differ in some aspects such as the size of the fifo and spi bus clock
@@ -156,6 +157,7 @@ struct s3c64xx_spi_port_config {
 	bool	clk_from_cmu;
 	bool	clk_ioclk;
 	bool	has_loopback;
+	bool	use_32bit_io;
 };
 
 /**
@@ -412,6 +414,35 @@ static bool s3c64xx_spi_can_dma(struct spi_controller *host,
 	return false;
 }
 
+static void s3c64xx_iowrite_rep(const struct s3c64xx_spi_driver_data *sdd,
+				struct spi_transfer *xfer)
+{
+	void __iomem *regs = sdd->regs;
+
+	switch (sdd->cur_bpw) {
+	case 32:
+		iowrite32_rep(regs + S3C64XX_SPI_TX_DATA,
+			      xfer->tx_buf, xfer->len / 4);
+		break;
+	case 16:
+		if (sdd->port_conf->use_32bit_io)
+			iowrite16_32_rep(regs + S3C64XX_SPI_TX_DATA,
+					 xfer->tx_buf, xfer->len / 2);
+		else
+			iowrite16_rep(regs + S3C64XX_SPI_TX_DATA,
+				      xfer->tx_buf, xfer->len / 2);
+		break;
+	default:
+		if (sdd->port_conf->use_32bit_io)
+			iowrite8_32_rep(regs + S3C64XX_SPI_TX_DATA,
+					xfer->tx_buf, xfer->len);
+		else
+			iowrite8_rep(regs + S3C64XX_SPI_TX_DATA,
+				     xfer->tx_buf, xfer->len);
+		break;
+	}
+}
+
 static int s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
 				    struct spi_transfer *xfer, int dma_mode)
 {
@@ -445,20 +476,7 @@ static int s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
 			modecfg |= S3C64XX_SPI_MODE_TXDMA_ON;
 			ret = s3c64xx_prepare_dma(&sdd->tx_dma, &xfer->tx_sg);
 		} else {
-			switch (sdd->cur_bpw) {
-			case 32:
-				iowrite32_rep(regs + S3C64XX_SPI_TX_DATA,
-					xfer->tx_buf, xfer->len / 4);
-				break;
-			case 16:
-				iowrite16_rep(regs + S3C64XX_SPI_TX_DATA,
-					xfer->tx_buf, xfer->len / 2);
-				break;
-			default:
-				iowrite8_rep(regs + S3C64XX_SPI_TX_DATA,
-					xfer->tx_buf, xfer->len);
-				break;
-			}
+			s3c64xx_iowrite_rep(sdd, xfer);
 		}
 	}
 
-- 
2.43.0.429.g432eaa2c6b-goog





[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux