[PATCH 15/21] spi: s3c64xx: simplify s3c64xx_wait_for_pio()

[Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>]

s3c64xx_spi_transfer_one() makes sure that for PIO the xfer->len is
always smaller than the fifo size. Clean s3c64xx_wait_for_pio() and
emphasize that it works with lengths smaller than the fifo size.

Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
---
 drivers/spi/spi-s3c64xx.c | 75 +++++++++------------------------------
 1 file changed, 17 insertions(+), 58 deletions(-)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index fd0e62ff8968..f5474f3b3920 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -484,26 +484,6 @@ static int s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
 	return 0;
 }
 
-static u32 s3c64xx_spi_wait_for_timeout(struct s3c64xx_spi_driver_data *sdd,
-					int timeout_ms)
-{
-	void __iomem *regs = sdd->regs;
-	unsigned long val = 1;
-	u32 status;
-	u32 max_fifo = FIFO_DEPTH(sdd);
-
-	if (timeout_ms)
-		val = msecs_to_loops(timeout_ms);
-
-	do {
-		status = readl(regs + S3C64XX_SPI_STATUS);
-	} while (FIELD_GET(S3C64XX_SPI_ST_RX_FIFO_LVL, status) < max_fifo &&
-		 --val);
-
-	/* return the actual received data length */
-	return FIELD_GET(S3C64XX_SPI_ST_RX_FIFO_LVL, status);
-}
-
 static int s3c64xx_wait_for_dma(struct s3c64xx_spi_driver_data *sdd,
 				struct spi_transfer *xfer)
 {
@@ -547,13 +527,11 @@ static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd,
 				struct spi_transfer *xfer, bool use_irq)
 {
 	void __iomem *regs = sdd->regs;
+	u8 *buf = xfer->rx_buf;
+	unsigned long time_us;
 	unsigned long val;
-	u32 status;
-	int loops;
-	u32 cpy_len;
-	u8 *buf;
+	u32 status, len;
 	int ms;
-	unsigned long time_us;
 
 	/* microsecs to xfer 'len' bytes @ 'cur_speed' */
 	time_us = (xfer->len * 8 * 1000 * 1000) / sdd->cur_speed;
@@ -576,48 +554,29 @@ static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd,
 		status = readl(regs + S3C64XX_SPI_STATUS);
 	} while (FIELD_GET(S3C64XX_SPI_ST_RX_FIFO_LVL, status) < xfer->len &&
 		 --val);
-
 	if (!val)
 		return -EIO;
 
 	/* If it was only Tx */
-	if (!xfer->rx_buf) {
+	if (!buf) {
 		sdd->state &= ~TXBUSY;
 		return 0;
 	}
 
-	/*
-	 * If the receive length is bigger than the controller fifo
-	 * size, calculate the loops and read the fifo as many times.
-	 * loops = length / max fifo size (calculated by using the
-	 * fifo mask).
-	 * For any size less than the fifo size the below code is
-	 * executed atleast once.
-	 */
-	loops = xfer->len / FIFO_DEPTH(sdd);
-	buf = xfer->rx_buf;
-	do {
-		/* wait for data to be received in the fifo */
-		cpy_len = s3c64xx_spi_wait_for_timeout(sdd,
-						       (loops ? ms : 0));
-
-		switch (sdd->cur_bpw) {
-		case 32:
-			ioread32_rep(regs + S3C64XX_SPI_RX_DATA,
-				     buf, cpy_len / 4);
-			break;
-		case 16:
-			ioread16_rep(regs + S3C64XX_SPI_RX_DATA,
-				     buf, cpy_len / 2);
-			break;
-		default:
-			ioread8_rep(regs + S3C64XX_SPI_RX_DATA,
-				    buf, cpy_len);
-			break;
-		}
+	len = FIELD_GET(S3C64XX_SPI_ST_RX_FIFO_LVL, status);
+
+	switch (sdd->cur_bpw) {
+	case 32:
+		ioread32_rep(regs + S3C64XX_SPI_RX_DATA, buf, len / 4);
+		break;
+	case 16:
+		ioread16_rep(regs + S3C64XX_SPI_RX_DATA, buf, len / 2);
+		break;
+	default:
+		ioread8_rep(regs + S3C64XX_SPI_RX_DATA, buf, len);
+		break;
+	}
 
-		buf = buf + cpy_len;
-	} while (loops--);
 	sdd->state &= ~RXBUSY;
 
 	return 0;
-- 
2.43.0.429.g432eaa2c6b-goog