[PATCH 2/5] spi: spi-nxp-fspi: change the default lut index

[haibo.chen@xxxxxxx]

From: Haibo Chen <haibo.chen@xxxxxxx>

The fspi dynamic lut use the last lut for all IPS operations, the
imx8ulp only supports 15 luts, so change the last lut index from
31 to 15.

Signed-off-by: Han Xu <han.xu@xxxxxxx>
Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
---
 drivers/spi/spi-nxp-fspi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index 0feecf5ba010..9d6b4d22263c 100644
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -64,9 +64,9 @@
 /*
  * The driver only uses one single LUT entry, that is updated on
  * each call of exec_op(). Index 0 is preset at boot with a basic
- * read operation, so let's use the last entry (31).
+ * read operation, so let's use the last entry (15).
  */
-#define	SEQID_LUT			31
+#define	SEQID_LUT			15
 
 /* Registers used by the driver */
 #define FSPI_MCR0			0x00
-- 
2.34.1