[PATCH AUTOSEL 6.1 11/39] spi: npcm-fiu: Fix UMA reads when dummy.nbytes == 0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: "William A. Kennington III" <william@xxxxxxxxxxxxxxx>

[ Upstream commit 2ec8b010979036c2fe79a64adb6ecc0bd11e91d1 ]

We don't want to use the value of ilog2(0) as dummy.buswidth is 0 when
dummy.nbytes is 0. Since we have no dummy bytes, we don't need to
configure the dummy byte bits per clock register value anyway.

Signed-off-by: "William A. Kennington III" <william@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20230922182812.2728066-1-william@xxxxxxxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/spi/spi-npcm-fiu.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-npcm-fiu.c b/drivers/spi/spi-npcm-fiu.c
index 49f6424e35af0..0624f52880705 100644
--- a/drivers/spi/spi-npcm-fiu.c
+++ b/drivers/spi/spi-npcm-fiu.c
@@ -353,8 +353,9 @@ static int npcm_fiu_uma_read(struct spi_mem *mem,
 		uma_cfg |= ilog2(op->cmd.buswidth);
 		uma_cfg |= ilog2(op->addr.buswidth)
 			<< NPCM_FIU_UMA_CFG_ADBPCK_SHIFT;
-		uma_cfg |= ilog2(op->dummy.buswidth)
-			<< NPCM_FIU_UMA_CFG_DBPCK_SHIFT;
+		if (op->dummy.nbytes)
+			uma_cfg |= ilog2(op->dummy.buswidth)
+				<< NPCM_FIU_UMA_CFG_DBPCK_SHIFT;
 		uma_cfg |= ilog2(op->data.buswidth)
 			<< NPCM_FIU_UMA_CFG_RDBPCK_SHIFT;
 		uma_cfg |= op->dummy.nbytes << NPCM_FIU_UMA_CFG_DBSIZ_SHIFT;
-- 
2.42.0




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux