[PATCH RFT v8 0/6] ARM: pxa: GPIO descriptor conversions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

Small series to convert some of the board files in the mach-pxa directory
to use the new GPIO descriptor interface.

Most notably, the am200epd, am300epd and Spitz matrix keypad among
others are not converted in this series.

Signed-off-by: Duje Mihanović <duje.mihanovic@xxxxxxxx>
---
Changes in v8:
- Address maintainer comments:
  - Do not pointlessly gpiod_get() LED gpios
- Update trailers
- Rebase on v6.6-rc5
- Link to v7: https://lore.kernel.org/r/20231009-pxa-gpio-v7-0-c8f5f403e856@xxxxxxxx

Changes in v7:
- Address maintainer comments:
  - Drop gpiod_put in OHCI
  - Make "struct gpio_descs *leds" in Spitz LEDs global
- Link to v6: https://lore.kernel.org/r/20231006-pxa-gpio-v6-0-981b4910d599@xxxxxxxx

Changes in v6:
- Address maintainer comments:
  - Use devm_gpiod_get_optional() in OHCI
  - Use gpiod_get_array() in Spitz LEDs
- Update trailers
- Link to v5: https://lore.kernel.org/r/20231004-pxa-gpio-v5-0-d99ae6fceea8@xxxxxxxx

Changes in v5:
- Address maintainer comments:
  - Rename "reset generator" GPIO to "reset"
  - Rename ads7846_wait_for_sync() to ads7846_wait_for_sync_gpio()
  - Properly bail out when requesting USB host GPIO fails
  - Use dev_err_probe() when requesting touchscreen sync GPIO fails
  - Use static gpio_desc for gumstix bluetooth reset
- Pulse gumstix bluetooth reset line correctly (assert, then deassert)
- Fix style issue in ads7846_wait_for_sync_gpio()
- Update trailers
- Link to v4: https://lore.kernel.org/r/20231001-pxa-gpio-v4-0-0f3b975e6ed5@xxxxxxxx

Changes in v4:
- Address maintainer comments:
  - Move wait_for_sync() from spitz.c to driver
  - Register LED platform device before getting its gpiod-s
- Add Linus' Reviewed-by
- Link to v3: https://lore.kernel.org/r/20230929-pxa-gpio-v3-0-af8d5e5d1f34@xxxxxxxx

Changes in v3:
- Address maintainer comments:
  - Use GPIO_LOOKUP_IDX for LEDs
  - Drop unnecessary NULL assignments
  - Don't give up on *all* SPI devices if hsync cannot be set up
- Add Linus' Acked-by
- Link to v2: https://lore.kernel.org/r/20230926-pxa-gpio-v2-0-984464d165dd@xxxxxxxx

Changes in v2:
- Address maintainer comments:
  - Change mentions of function to function()
  - Drop cast in OHCI driver dev_warn() call
  - Use %pe in OHCI and reset drivers
  - Use GPIO _optional() API in OHCI driver
  - Drop unnecessary not-null check in OHCI driver
  - Use pr_err() instead of printk() in reset driver
- Rebase on v6.6-rc3
- Link to v1: https://lore.kernel.org/r/20230924-pxa-gpio-v1-0-2805b87d8894@xxxxxxxx

---
Duje Mihanović (6):
      ARM: pxa: Convert Spitz OHCI to GPIO descriptors
      ARM: pxa: Convert Spitz LEDs to GPIO descriptors
      ARM: pxa: Convert Spitz CF power control to GPIO descriptors
      ARM: pxa: Convert reset driver to GPIO descriptors
      ARM: pxa: Convert gumstix Bluetooth to GPIO descriptors
      input: ads7846: Move wait_for_sync() logic to driver

 arch/arm/mach-pxa/gumstix.c         | 22 ++++++-------
 arch/arm/mach-pxa/reset.c           | 39 ++++++++--------------
 arch/arm/mach-pxa/reset.h           |  3 +-
 arch/arm/mach-pxa/spitz.c           | 65 ++++++++++++++++++++++++-------------
 drivers/input/touchscreen/ads7846.c | 22 +++++++++----
 drivers/usb/host/ohci-pxa27x.c      |  5 +++
 include/linux/spi/ads7846.h         |  1 -
 7 files changed, 88 insertions(+), 69 deletions(-)
---
base-commit: 94f6f0550c625fab1f373bb86a6669b45e9748b3
change-id: 20230807-pxa-gpio-3ce25d574814

Best regards,
-- 
Duje Mihanović <duje.mihanovic@xxxxxxxx>





[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux