ETZPC is a firewall controller. Put all peripherals filtered by the
ETZPC as ETZPC subnodes and reference ETZPC as an
access-control-provider.
For more information on which peripheral is securable or supports MCU
isolation, please read the STM32MP15 reference manual.
Signed-off-by: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
---
Changes in V5:
- Renamed feature-domain* to access-control*
arch/arm/boot/dts/st/stm32mp151.dtsi | 2757 +++++++++++++------------
arch/arm/boot/dts/st/stm32mp153.dtsi | 52 +-
arch/arm/boot/dts/st/stm32mp15xc.dtsi | 19 +-
3 files changed, 1451 insertions(+), 1377 deletions(-)
diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi
index 61508917521c..0c8a74b31f8d 100644
--- a/arch/arm/boot/dts/st/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp151.dtsi
@@ -122,1543 +122,1616 @@ soc {
interrupt-parent = <&intc>;
ranges;
- timers2: timer@40000000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40000000 0x400>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM2_K>;
- clock-names = "int";
- dmas = <&dmamux1 18 0x400 0x1>,
- <&dmamux1 19 0x400 0x1>,
- <&dmamux1 20 0x400 0x1>,
- <&dmamux1 21 0x400 0x1>,
- <&dmamux1 22 0x400 0x1>;
- dma-names = "ch1", "ch2", "ch3", "ch4", "up";
+ ipcc: mailbox@4c001000 {
+ compatible = "st,stm32mp1-ipcc";
+ #mbox-cells = <1>;
+ reg = <0x4c001000 0x400>;
+ st,proc-id = <0>;
+ interrupts-extended =
+ <&exti 61 1>,
+ <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx", "tx";
+ clocks = <&rcc IPCC>;
+ wakeup-source;
status = "disabled";
+ };
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@1 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <1>;
- status = "disabled";
- };
-
- counter {
- compatible = "st,stm32-timer-counter";
- status = "disabled";
- };
+ rcc: rcc@50000000 {
+ compatible = "st,stm32mp1-rcc", "syscon";
+ reg = <0x50000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
};
- timers3: timer@40001000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40001000 0x400>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM3_K>;
- clock-names = "int";
- dmas = <&dmamux1 23 0x400 0x1>,
- <&dmamux1 24 0x400 0x1>,
- <&dmamux1 25 0x400 0x1>,
- <&dmamux1 26 0x400 0x1>,
- <&dmamux1 27 0x400 0x1>,
- <&dmamux1 28 0x400 0x1>;
- dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
- status = "disabled";
+ pwr_regulators: pwr@50001000 {
+ compatible = "st,stm32mp1,pwr-reg";
+ reg = <0x50001000 0x10>;
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
+ reg11: reg11 {
+ regulator-name = "reg11";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
};
- timer@2 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <2>;
- status = "disabled";
+ reg18: reg18 {
+ regulator-name = "reg18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- counter {
- compatible = "st,stm32-timer-counter";
- status = "disabled";
+ usb33: usb33 {
+ regulator-name = "usb33";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
};
};
- timers4: timer@40002000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40002000 0x400>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM4_K>;
- clock-names = "int";
- dmas = <&dmamux1 29 0x400 0x1>,
- <&dmamux1 30 0x400 0x1>,
- <&dmamux1 31 0x400 0x1>,
- <&dmamux1 32 0x400 0x1>;
- dma-names = "ch1", "ch2", "ch3", "ch4";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
+ pwr_mcu: pwr_mcu@50001014 {
+ compatible = "st,stm32mp151-pwr-mcu", "syscon";
+ reg = <0x50001014 0x4>;
+ };
- timer@3 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <3>;
- status = "disabled";
- };
+ exti: interrupt-controller@5000d000 {
+ compatible = "st,stm32mp1-exti", "syscon";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000d000 0x400>;
+ };
- counter {
- compatible = "st,stm32-timer-counter";
- status = "disabled";
- };
+ syscfg: syscon@50020000 {
+ compatible = "st,stm32mp157-syscfg", "syscon";
+ reg = <0x50020000 0x400>;
+ clocks = <&rcc SYSCFG>;
};
- timers5: timer@40003000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40003000 0x400>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM5_K>;
- clock-names = "int";
- dmas = <&dmamux1 55 0x400 0x1>,
- <&dmamux1 56 0x400 0x1>,
- <&dmamux1 57 0x400 0x1>,
- <&dmamux1 58 0x400 0x1>,
- <&dmamux1 59 0x400 0x1>,
- <&dmamux1 60 0x400 0x1>;
- dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
+ dts: thermal@50028000 {
+ compatible = "st,stm32-thermal";
+ reg = <0x50028000 0x100>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc TMPSENS>;
+ clock-names = "pclk";
+ #thermal-sensor-cells = <0>;
status = "disabled";
+ };
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@4 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <4>;
- status = "disabled";
- };
-
- counter {
- compatible = "st,stm32-timer-counter";
- status = "disabled";
- };
+ mdma1: dma-controller@58000000 {
+ compatible = "st,stm32h7-mdma";
+ reg = <0x58000000 0x1000>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc MDMA>;
+ resets = <&rcc MDMA_R>;
+ #dma-cells = <5>;
+ dma-channels = <32>;
+ dma-requests = <48>;
};
- timers6: timer@40004000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40004000 0x400>;
- interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM6_K>;
- clock-names = "int";
- dmas = <&dmamux1 69 0x400 0x1>;
- dma-names = "up";
+ sdmmc1: mmc@58005000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00253180>;
+ reg = <0x58005000 0x1000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SDMMC1_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC1_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
status = "disabled";
-
- timer@5 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <5>;
- status = "disabled";
- };
};
- timers7: timer@40005000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40005000 0x400>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM7_K>;
- clock-names = "int";
- dmas = <&dmamux1 70 0x400 0x1>;
- dma-names = "up";
+ sdmmc2: mmc@58007000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00253180>;
+ reg = <0x58007000 0x1000>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SDMMC2_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC2_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
status = "disabled";
-
- timer@6 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <6>;
- status = "disabled";
- };
};
- timers12: timer@40006000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40006000 0x400>;
- interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM12_K>;
- clock-names = "int";
+ crc1: crc@58009000 {
+ compatible = "st,stm32f7-crc";
+ reg = <0x58009000 0x400>;
+ clocks = <&rcc CRC1>;
status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@11 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <11>;
- status = "disabled";
- };
};
- timers13: timer@40007000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40007000 0x400>;
- interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM13_K>;
- clock-names = "int";
+ usbh_ohci: usb@5800c000 {
+ compatible = "generic-ohci";
+ reg = <0x5800c000 0x1000>;
+ clocks = <&usbphyc>, <&rcc USBH>;
+ resets = <&rcc USBH_R>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@12 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <12>;
- status = "disabled";
- };
};
- timers14: timer@40008000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40008000 0x400>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM14_K>;
- clock-names = "int";
+ usbh_ehci: usb@5800d000 {
+ compatible = "generic-ehci";
+ reg = <0x5800d000 0x1000>;
+ clocks = <&usbphyc>, <&rcc USBH>;
+ resets = <&rcc USBH_R>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ companion = <&usbh_ohci>;
status = "disabled";
+ };
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
+ ltdc: display-controller@5a001000 {
+ compatible = "st,stm32-ltdc";
+ reg = <0x5a001000 0x400>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LTDC_PX>;
+ clock-names = "lcd";
+ resets = <&rcc LTDC_R>;
+ status = "disabled";
+ };
- timer@13 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <13>;
- status = "disabled";
- };
+ iwdg2: watchdog@5a002000 {
+ compatible = "st,stm32mp1-iwdg";
+ reg = <0x5a002000 0x400>;
+ clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
+ clock-names = "pclk", "lsi";
+ status = "disabled";
};
- lptimer1: timer@40009000 {
+ usbphyc: usbphyc@5a006000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "st,stm32-lptimer";
- reg = <0x40009000 0x400>;
- interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM1_K>;
- clock-names = "mux";
- wakeup-source;
+ #clock-cells = <0>;
+ compatible = "st,stm32mp1-usbphyc";
+ reg = <0x5a006000 0x1000>;
+ clocks = <&rcc USBPHY_K>;
+ resets = <&rcc USBPHY_R>;
+ vdda1v1-supply = <®11>;
+ vdda1v8-supply = <®18>;
status = "disabled";
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- trigger@0 {
- compatible = "st,stm32-lptimer-trigger";
+ usbphyc_port0: usb-phy@0 {
+ #phy-cells = <0>;
reg = <0>;
- status = "disabled";
};
- counter {
- compatible = "st,stm32-lptimer-counter";
- status = "disabled";
+ usbphyc_port1: usb-phy@1 {
+ #phy-cells = <1>;
+ reg = <1>;
};
};
- spi2: spi@4000b000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32h7-spi";
- reg = <0x4000b000 0x400>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI2_K>;
- resets = <&rcc SPI2_R>;
- dmas = <&dmamux1 39 0x400 0x05>,
- <&dmamux1 40 0x400 0x05>;
- dma-names = "rx", "tx";
+ rtc: rtc@5c004000 {
+ compatible = "st,stm32mp1-rtc";
+ reg = <0x5c004000 0x400>;
+ clocks = <&rcc RTCAPB>, <&rcc RTC>;
+ clock-names = "pclk", "rtc_ck";
+ interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- i2s2: audio-controller@4000b000 {
- compatible = "st,stm32h7-i2s";
- #sound-dai-cells = <0>;
- reg = <0x4000b000 0x400>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 39 0x400 0x01>,
- <&dmamux1 40 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
+ bsec: efuse@5c005000 {
+ compatible = "st,stm32mp15-bsec";
+ reg = <0x5c005000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ part_number_otp: part-number-otp@4 {
+ reg = <0x4 0x1>;
+ };
+ vrefint: vrefin-cal@52 {
+ reg = <0x52 0x2>;
+ };
+ ts_cal1: calib@5c {
+ reg = <0x5c 0x2>;
+ };
+ ts_cal2: calib@5e {
+ reg = <0x5e 0x2>;
+ };
};
- spi3: spi@4000c000 {
+ etzpc: bus@5c007000 {
+ compatible = "st,stm32-etzpc";
+ reg = <0x5c007000 0x400>;
#address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32h7-spi";
- reg = <0x4000c000 0x400>;
- interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI3_K>;
- resets = <&rcc SPI3_R>;
- dmas = <&dmamux1 61 0x400 0x05>,
- <&dmamux1 62 0x400 0x05>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ #size-cells = <1>;
+ access-control-provider;
+ #access-controller-cells = <1>;
+ ranges;
- i2s3: audio-controller@4000c000 {
- compatible = "st,stm32h7-i2s";
- #sound-dai-cells = <0>;
- reg = <0x4000c000 0x400>;
- interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 61 0x400 0x01>,
- <&dmamux1 62 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ timers2: timer@40000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000000 0x400>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM2_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 18 0x400 0x1>,
+ <&dmamux1 19 0x400 0x1>,
+ <&dmamux1 20 0x400 0x1>,
+ <&dmamux1 21 0x400 0x1>,
+ <&dmamux1 22 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4", "up";
+ access-controller = <&etzpc 16>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
- spdifrx: audio-controller@4000d000 {
- compatible = "st,stm32h7-spdifrx";
- #sound-dai-cells = <0>;
- reg = <0x4000d000 0x400>;
- clocks = <&rcc SPDIF_K>;
- clock-names = "kclk";
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 93 0x400 0x01>,
- <&dmamux1 94 0x400 0x01>;
- dma-names = "rx", "rx-ctrl";
- status = "disabled";
- };
+ timer@1 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
- usart2: serial@4000e000 {
- compatible = "st,stm32h7-uart";
- reg = <0x4000e000 0x400>;
- interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc USART2_K>;
- wakeup-source;
- dmas = <&dmamux1 43 0x400 0x15>,
- <&dmamux1 44 0x400 0x11>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+ };
- usart3: serial@4000f000 {
- compatible = "st,stm32h7-uart";
- reg = <0x4000f000 0x400>;
- interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc USART3_K>;
- wakeup-source;
- dmas = <&dmamux1 45 0x400 0x15>,
- <&dmamux1 46 0x400 0x11>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ timers3: timer@40001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001000 0x400>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM3_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 23 0x400 0x1>,
+ <&dmamux1 24 0x400 0x1>,
+ <&dmamux1 25 0x400 0x1>,
+ <&dmamux1 26 0x400 0x1>,
+ <&dmamux1 27 0x400 0x1>,
+ <&dmamux1 28 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
+ access-controller = <&etzpc 17>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
- uart4: serial@40010000 {
- compatible = "st,stm32h7-uart";
- reg = <0x40010000 0x400>;
- interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc UART4_K>;
- wakeup-source;
- dmas = <&dmamux1 63 0x400 0x15>,
- <&dmamux1 64 0x400 0x11>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ timer@2 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
- uart5: serial@40011000 {
- compatible = "st,stm32h7-uart";
- reg = <0x40011000 0x400>;
- interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc UART5_K>;
- wakeup-source;
- dmas = <&dmamux1 65 0x400 0x15>,
- <&dmamux1 66 0x400 0x11>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+ };
- i2c1: i2c@40012000 {
- compatible = "st,stm32mp15-i2c";
- reg = <0x40012000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C1_K>;
- resets = <&rcc I2C1_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- st,syscfg-fmp = <&syscfg 0x4 0x1>;
- wakeup-source;
- i2c-analog-filter;
- status = "disabled";
- };
+ timers4: timer@40002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40002000 0x400>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM4_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 29 0x400 0x1>,
+ <&dmamux1 30 0x400 0x1>,
+ <&dmamux1 31 0x400 0x1>,
+ <&dmamux1 32 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4";
+ access-controller = <&etzpc 18>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
- i2c2: i2c@40013000 {
- compatible = "st,stm32mp15-i2c";
- reg = <0x40013000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C2_K>;
- resets = <&rcc I2C2_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- st,syscfg-fmp = <&syscfg 0x4 0x2>;
- wakeup-source;
- i2c-analog-filter;
- status = "disabled";
- };
+ timer@3 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <3>;
+ status = "disabled";
+ };
- i2c3: i2c@40014000 {
- compatible = "st,stm32mp15-i2c";
- reg = <0x40014000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C3_K>;
- resets = <&rcc I2C3_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- st,syscfg-fmp = <&syscfg 0x4 0x4>;
- wakeup-source;
- i2c-analog-filter;
- status = "disabled";
- };
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+ };
- i2c5: i2c@40015000 {
- compatible = "st,stm32mp15-i2c";
- reg = <0x40015000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C5_K>;
- resets = <&rcc I2C5_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- st,syscfg-fmp = <&syscfg 0x4 0x10>;
- wakeup-source;
- i2c-analog-filter;
- status = "disabled";
- };
+ timers5: timer@40003000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40003000 0x400>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM5_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 55 0x400 0x1>,
+ <&dmamux1 56 0x400 0x1>,
+ <&dmamux1 57 0x400 0x1>,
+ <&dmamux1 58 0x400 0x1>,
+ <&dmamux1 59 0x400 0x1>,
+ <&dmamux1 60 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
+ access-controller = <&etzpc 19>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
- cec: cec@40016000 {
- compatible = "st,stm32-cec";
- reg = <0x40016000 0x400>;
- interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CEC_K>, <&rcc CEC>;
- clock-names = "cec", "hdmi-cec";
- status = "disabled";
- };
+ timer@4 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <4>;
+ status = "disabled";
+ };
- dac: dac@40017000 {
- compatible = "st,stm32h7-dac-core";
- reg = <0x40017000 0x400>;
- clocks = <&rcc DAC12>;
- clock-names = "pclk";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+ };
- dac1: dac@1 {
- compatible = "st,stm32-dac";
- #io-channel-cells = <1>;
- reg = <1>;
- status = "disabled";
+ timers6: timer@40004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40004000 0x400>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM6_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 69 0x400 0x1>;
+ dma-names = "up";
+ access-controller = <&etzpc 20>;
+ status = "disabled";
+
+ timer@5 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <5>;
+ status = "disabled";
+ };
};
- dac2: dac@2 {
- compatible = "st,stm32-dac";
- #io-channel-cells = <1>;
- reg = <2>;
- status = "disabled";
+ timers7: timer@40005000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40005000 0x400>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM7_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 70 0x400 0x1>;
+ dma-names = "up";
+ access-controller = <&etzpc 21>;
+ status = "disabled";
+
+ timer@6 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <6>;
+ status = "disabled";
+ };
};
- };
- uart7: serial@40018000 {
- compatible = "st,stm32h7-uart";
- reg = <0x40018000 0x400>;
- interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc UART7_K>;
- wakeup-source;
- dmas = <&dmamux1 79 0x400 0x15>,
- <&dmamux1 80 0x400 0x11>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ timers12: timer@40006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40006000 0x400>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM12_K>;
+ clock-names = "int";
+ access-controller = <&etzpc 22>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
- uart8: serial@40019000 {
- compatible = "st,stm32h7-uart";
- reg = <0x40019000 0x400>;
- interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc UART8_K>;
- wakeup-source;
- dmas = <&dmamux1 81 0x400 0x15>,
- <&dmamux1 82 0x400 0x11>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ timer@11 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <11>;
+ status = "disabled";
+ };
+ };
- timers1: timer@44000000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x44000000 0x400>;
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "brk", "up", "trg-com", "cc";
- clocks = <&rcc TIM1_K>;
- clock-names = "int";
- dmas = <&dmamux1 11 0x400 0x1>,
- <&dmamux1 12 0x400 0x1>,
- <&dmamux1 13 0x400 0x1>,
- <&dmamux1 14 0x400 0x1>,
- <&dmamux1 15 0x400 0x1>,
- <&dmamux1 16 0x400 0x1>,
- <&dmamux1 17 0x400 0x1>;
- dma-names = "ch1", "ch2", "ch3", "ch4",
- "up", "trig", "com";
- status = "disabled";
+ timers13: timer@40007000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40007000 0x400>;
+ interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM13_K>;
+ clock-names = "int";
+ access-controller = <&etzpc 23>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
+ timer@12 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <12>;
+ status = "disabled";
+ };
};
- timer@0 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <0>;
- status = "disabled";
- };
+ timers14: timer@40008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40008000 0x400>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM14_K>;
+ clock-names = "int";
+ access-controller = <&etzpc 24>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
- counter {
- compatible = "st,stm32-timer-counter";
- status = "disabled";
+ timer@13 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <13>;
+ status = "disabled";
+ };
};
- };
- timers8: timer@44001000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x44001000 0x400>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "brk", "up", "trg-com", "cc";
- clocks = <&rcc TIM8_K>;
- clock-names = "int";
- dmas = <&dmamux1 47 0x400 0x1>,
- <&dmamux1 48 0x400 0x1>,
- <&dmamux1 49 0x400 0x1>,
- <&dmamux1 50 0x400 0x1>,
- <&dmamux1 51 0x400 0x1>,
- <&dmamux1 52 0x400 0x1>,
- <&dmamux1 53 0x400 0x1>;
- dma-names = "ch1", "ch2", "ch3", "ch4",
- "up", "trig", "com";
- status = "disabled";
+ lptimer1: timer@40009000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x40009000 0x400>;
+ interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM1_K>;
+ clock-names = "mux";
+ wakeup-source;
+ access-controller = <&etzpc 25>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
+ trigger@0 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
};
- timer@7 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <7>;
+ i2s2: audio-controller@4000b000 {
+ compatible = "st,stm32h7-i2s";
+ #sound-dai-cells = <0>;
+ reg = <0x4000b000 0x400>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 39 0x400 0x01>,
+ <&dmamux1 40 0x400 0x01>;
+ dma-names = "rx", "tx";
+ access-controller = <&etzpc 27>;
status = "disabled";
};
- counter {
- compatible = "st,stm32-timer-counter";
+ spi2: spi@4000b000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x4000b000 0x400>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI2_K>;
+ resets = <&rcc SPI2_R>;
+ dmas = <&dmamux1 39 0x400 0x05>,
+ <&dmamux1 40 0x400 0x05>;
+ dma-names = "rx", "tx";
+ access-controller = <&etzpc 27>;
status = "disabled";
};
- };
-
- usart6: serial@44003000 {
- compatible = "st,stm32h7-uart";
- reg = <0x44003000 0x400>;
- interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc USART6_K>;
- wakeup-source;
- dmas = <&dmamux1 71 0x400 0x15>,
- <&dmamux1 72 0x400 0x11>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- spi1: spi@44004000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32h7-spi";
- reg = <0x44004000 0x400>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI1_K>;
- resets = <&rcc SPI1_R>;
- dmas = <&dmamux1 37 0x400 0x05>,
- <&dmamux1 38 0x400 0x05>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2s1: audio-controller@44004000 {
- compatible = "st,stm32h7-i2s";
- #sound-dai-cells = <0>;
- reg = <0x44004000 0x400>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 37 0x400 0x01>,
- <&dmamux1 38 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
- spi4: spi@44005000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32h7-spi";
- reg = <0x44005000 0x400>;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI4_K>;
- resets = <&rcc SPI4_R>;
- dmas = <&dmamux1 83 0x400 0x05>,
- <&dmamux1 84 0x400 0x05>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- timers15: timer@44006000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x44006000 0x400>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM15_K>;
- clock-names = "int";
- dmas = <&dmamux1 105 0x400 0x1>,
- <&dmamux1 106 0x400 0x1>,
- <&dmamux1 107 0x400 0x1>,
- <&dmamux1 108 0x400 0x1>;
- dma-names = "ch1", "up", "trig", "com";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
+ i2s3: audio-controller@4000c000 {
+ compatible = "st,stm32h7-i2s";
+ #sound-dai-cells = <0>;
+ reg = <0x4000c000 0x400>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 61 0x400 0x01>,
+ <&dmamux1 62 0x400 0x01>;
+ dma-names = "rx", "tx";
+ access-controller = <&etzpc 28>;
status = "disabled";
};
- timer@14 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <14>;
+ spi3: spi@4000c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x4000c000 0x400>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI3_K>;
+ resets = <&rcc SPI3_R>;
+ dmas = <&dmamux1 61 0x400 0x05>,
+ <&dmamux1 62 0x400 0x05>;
+ dma-names = "rx", "tx";
+ access-controller = <&etzpc 28>;
status = "disabled";
};
- };
-
- timers16: timer@44007000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x44007000 0x400>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM16_K>;
- clock-names = "int";
- dmas = <&dmamux1 109 0x400 0x1>,
- <&dmamux1 110 0x400 0x1>;
- dma-names = "ch1", "up";
- status = "disabled";
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
+ spdifrx: audio-controller@4000d000 {
+ compatible = "st,stm32h7-spdifrx";
+ #sound-dai-cells = <0>;
+ reg = <0x4000d000 0x400>;
+ clocks = <&rcc SPDIF_K>;
+ clock-names = "kclk";
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 93 0x400 0x01>,
+ <&dmamux1 94 0x400 0x01>;
+ dma-names = "rx", "rx-ctrl";
+ access-controller = <&etzpc 29>;
+ status = "disabled";
+ };
+
+ usart2: serial@4000e000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4000e000 0x400>;
+ interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART2_K>;
+ wakeup-source;
+ dmas = <&dmamux1 43 0x400 0x15>,
+ <&dmamux1 44 0x400 0x11>;
+ dma-names = "rx", "tx";
+ access-controller = <&etzpc 30>;
+ status = "disabled";
+ };
+
+ usart3: serial@4000f000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4000f000 0x400>;
+ interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART3_K>;
+ wakeup-source;
+ dmas = <&dmamux1 45 0x400 0x15>,
+ <&dmamux1 46 0x400 0x11>;
+ dma-names = "rx", "tx";
+ access-controller = <&etzpc 31>;
+ status = "disabled";
+ };
+
+ uart4: serial@40010000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40010000 0x400>;
+ interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART4_K>;
+ wakeup-source;
+ dmas = <&dmamux1 63 0x400 0x15>,
+ <&dmamux1 64 0x400 0x11>;
+ dma-names = "rx", "tx";
+ access-controller = <&etzpc 32>;
+ status = "disabled";
+ };
+
+ uart5: serial@40011000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40011000 0x400>;
+ interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART5_K>;
+ wakeup-source;
+ dmas = <&dmamux1 65 0x400 0x15>,
+ <&dmamux1 66 0x400 0x11>;
+ dma-names = "rx", "tx";
+ access-controller = <&etzpc 33>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@40012000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x40012000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C1_K>;
+ resets = <&rcc I2C1_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ st,syscfg-fmp = <&syscfg 0x4 0x1>;
+ wakeup-source;
+ i2c-analog-filter;
+ access-controller = <&etzpc 34>;
status = "disabled";
};
- timer@15 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <15>;
+
+ i2c2: i2c@40013000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x40013000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C2_K>;
+ resets = <&rcc I2C2_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ st,syscfg-fmp = <&syscfg 0x4 0x2>;
+ wakeup-source;
+ i2c-analog-filter;
+ access-controller = <&etzpc 35>;
status = "disabled";
};
- };
- timers17: timer@44008000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x44008000 0x400>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM17_K>;
- clock-names = "int";
- dmas = <&dmamux1 111 0x400 0x1>,
- <&dmamux1 112 0x400 0x1>;
- dma-names = "ch1", "up";
- status = "disabled";
+ i2c3: i2c@40014000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x40014000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C3_K>;
+ resets = <&rcc I2C3_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ st,syscfg-fmp = <&syscfg 0x4 0x4>;
+ wakeup-source;
+ i2c-analog-filter;
+ access-controller = <&etzpc 36>;
+ status = "disabled";
+ };
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
+ i2c5: i2c@40015000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x40015000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C5_K>;
+ resets = <&rcc I2C5_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ st,syscfg-fmp = <&syscfg 0x4 0x10>;
+ wakeup-source;
+ i2c-analog-filter;
+ access-controller = <&etzpc 37>;
status = "disabled";
};
- timer@16 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <16>;
+ cec: cec@40016000 {
+ compatible = "st,stm32-cec";
+ reg = <0x40016000 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CEC_K>, <&rcc CEC>;
+ clock-names = "cec", "hdmi-cec";
+ access-controller = <&etzpc 38>;
status = "disabled";
};
- };
- spi5: spi@44009000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32h7-spi";
- reg = <0x44009000 0x400>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI5_K>;
- resets = <&rcc SPI5_R>;
- dmas = <&dmamux1 85 0x400 0x05>,
- <&dmamux1 86 0x400 0x05>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ dac: dac@40017000 {
+ compatible = "st,stm32h7-dac-core";
+ reg = <0x40017000 0x400>;
+ clocks = <&rcc DAC12>;
+ clock-names = "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controller = <&etzpc 39>;
+ status = "disabled";
- sai1: sai@4400a000 {
- compatible = "st,stm32h7-sai";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x4400a000 0x400>;
- reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
- interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&rcc SAI1_R>;
- status = "disabled";
+ dac1: dac@1 {
+ compatible = "st,stm32-dac";
+ #io-channel-cells = <1>;
+ reg = <1>;
+ status = "disabled";
+ };
- sai1a: audio-controller@4400a004 {
- #sound-dai-cells = <0>;
+ dac2: dac@2 {
+ compatible = "st,stm32-dac";
+ #io-channel-cells = <1>;
+ reg = <2>;
+ status = "disabled";
+ };
+ };
- compatible = "st,stm32-sai-sub-a";
- reg = <0x4 0x20>;
- clocks = <&rcc SAI1_K>;
- clock-names = "sai_ck";
- dmas = <&dmamux1 87 0x400 0x01>;
+ uart7: serial@40018000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40018000 0x400>;
+ interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART7_K>;
+ wakeup-source;
+ dmas = <&dmamux1 79 0x400 0x15>,
+ <&dmamux1 80 0x400 0x11>;
+ dma-names = "rx", "tx";
+ access-controller = <&etzpc 40>;
status = "disabled";
};
- sai1b: audio-controller@4400a024 {
- #sound-dai-cells = <0>;
- compatible = "st,stm32-sai-sub-b";
- reg = <0x24 0x20>;
- clocks = <&rcc SAI1_K>;
- clock-names = "sai_ck";
- dmas = <&dmamux1 88 0x400 0x01>;
+ uart8: serial@40019000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40019000 0x400>;
+ interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART8_K>;
+ wakeup-source;
+ dmas = <&dmamux1 81 0x400 0x15>,
+ <&dmamux1 82 0x400 0x11>;
+ dma-names = "rx", "tx";
+ access-controller = <&etzpc 41>;
status = "disabled";
};
- };
- sai2: sai@4400b000 {
- compatible = "st,stm32h7-sai";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x4400b000 0x400>;
- reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&rcc SAI2_R>;
- status = "disabled";
+ timers1: timer@44000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44000000 0x400>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "brk", "up", "trg-com", "cc";
+ clocks = <&rcc TIM1_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 11 0x400 0x1>,
+ <&dmamux1 12 0x400 0x1>,
+ <&dmamux1 13 0x400 0x1>,
+ <&dmamux1 14 0x400 0x1>,
+ <&dmamux1 15 0x400 0x1>,
+ <&dmamux1 16 0x400 0x1>,
+ <&dmamux1 17 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4",
+ "up", "trig", "com";
+ access-controller = <&etzpc 48>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
- sai2a: audio-controller@4400b004 {
- #sound-dai-cells = <0>;
- compatible = "st,stm32-sai-sub-a";
- reg = <0x4 0x20>;
- clocks = <&rcc SAI2_K>;
- clock-names = "sai_ck";
- dmas = <&dmamux1 89 0x400 0x01>;
- status = "disabled";
- };
+ timer@0 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
- sai2b: audio-controller@4400b024 {
- #sound-dai-cells = <0>;
- compatible = "st,stm32-sai-sub-b";
- reg = <0x24 0x20>;
- clocks = <&rcc SAI2_K>;
- clock-names = "sai_ck";
- dmas = <&dmamux1 90 0x400 0x01>;
- status = "disabled";
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
};
- };
- sai3: sai@4400c000 {
- compatible = "st,stm32h7-sai";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x4400c000 0x400>;
- reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&rcc SAI3_R>;
- status = "disabled";
+ timers8: timer@44001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44001000 0x400>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "brk", "up", "trg-com", "cc";
+ clocks = <&rcc TIM8_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 47 0x400 0x1>,
+ <&dmamux1 48 0x400 0x1>,
+ <&dmamux1 49 0x400 0x1>,
+ <&dmamux1 50 0x400 0x1>,
+ <&dmamux1 51 0x400 0x1>,
+ <&dmamux1 52 0x400 0x1>,
+ <&dmamux1 53 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4",
+ "up", "trig", "com";
+ access-controller = <&etzpc 49>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
- sai3a: audio-controller@4400c004 {
- #sound-dai-cells = <0>;
- compatible = "st,stm32-sai-sub-a";
- reg = <0x04 0x20>;
- clocks = <&rcc SAI3_K>;
- clock-names = "sai_ck";
- dmas = <&dmamux1 113 0x400 0x01>;
+ timer@7 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <7>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+ };
+
+ usart6: serial@44003000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x44003000 0x400>;
+ interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART6_K>;
+ wakeup-source;
+ dmas = <&dmamux1 71 0x400 0x15>,
+ <&dmamux1 72 0x400 0x11>;
+ dma-names = "rx", "tx";
+ access-controller = <&etzpc 51>;
status = "disabled";
};
- sai3b: audio-controller@4400c024 {
+ i2s1: audio-controller@44004000 {
+ compatible = "st,stm32h7-i2s";
#sound-dai-cells = <0>;
- compatible = "st,stm32-sai-sub-b";
- reg = <0x24 0x20>;
- clocks = <&rcc SAI3_K>;
- clock-names = "sai_ck";
- dmas = <&dmamux1 114 0x400 0x01>;
+ reg = <0x44004000 0x400>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 37 0x400 0x01>,
+ <&dmamux1 38 0x400 0x01>;
+ dma-names = "rx", "tx";
+ access-controller = <&etzpc 52>;
status = "disabled";
};
- };
-
- dfsdm: dfsdm@4400d000 {
- compatible = "st,stm32mp1-dfsdm";
- reg = <0x4400d000 0x800>;
- clocks = <&rcc DFSDM_K>;
- clock-names = "dfsdm";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- dfsdm0: filter@0 {
- compatible = "st,stm32-dfsdm-adc";
- #io-channel-cells = <1>;
- reg = <0>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 101 0x400 0x01>;
- dma-names = "rx";
+ spi1: spi@44004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x44004000 0x400>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI1_K>;
+ resets = <&rcc SPI1_R>;
+ dmas = <&dmamux1 37 0x400 0x05>,
+ <&dmamux1 38 0x400 0x05>;
+ dma-names = "rx", "tx";
+ access-controller = <&etzpc 52>;
status = "disabled";
};
- dfsdm1: filter@1 {
- compatible = "st,stm32-dfsdm-adc";
- #io-channel-cells = <1>;
- reg = <1>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 102 0x400 0x01>;
- dma-names = "rx";
+ spi4: spi@44005000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x44005000 0x400>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI4_K>;
+ resets = <&rcc SPI4_R>;
+ dmas = <&dmamux1 83 0x400 0x05>,
+ <&dmamux1 84 0x400 0x05>;
+ dma-names = "rx", "tx";
+ access-controller = <&etzpc 53>;
status = "disabled";
};
- dfsdm2: filter@2 {
- compatible = "st,stm32-dfsdm-adc";
- #io-channel-cells = <1>;
- reg = <2>;
- interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 103 0x400 0x01>;
- dma-names = "rx";
- status = "disabled";
+ timers15: timer@44006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44006000 0x400>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM15_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 105 0x400 0x1>,
+ <&dmamux1 106 0x400 0x1>,
+ <&dmamux1 107 0x400 0x1>,
+ <&dmamux1 108 0x400 0x1>;
+ dma-names = "ch1", "up", "trig", "com";
+ access-controller = <&etzpc 54>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@14 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <14>;
+ status = "disabled";
+ };
};
- dfsdm3: filter@3 {
- compatible = "st,stm32-dfsdm-adc";
- #io-channel-cells = <1>;
- reg = <3>;
- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 104 0x400 0x01>;
- dma-names = "rx";
- status = "disabled";
+ timers16: timer@44007000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44007000 0x400>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM16_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 109 0x400 0x1>,
+ <&dmamux1 110 0x400 0x1>;
+ dma-names = "ch1", "up";
+ access-controller = <&etzpc 55>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+ timer@15 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <15>;
+ status = "disabled";
+ };
};
- dfsdm4: filter@4 {
- compatible = "st,stm32-dfsdm-adc";
- #io-channel-cells = <1>;
- reg = <4>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 91 0x400 0x01>;
- dma-names = "rx";
- status = "disabled";
+ timers17: timer@44008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44008000 0x400>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM17_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 111 0x400 0x1>,
+ <&dmamux1 112 0x400 0x1>;
+ dma-names = "ch1", "up";
+ access-controller = <&etzpc 56>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@16 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <16>;
+ status = "disabled";
+ };
};
- dfsdm5: filter@5 {
- compatible = "st,stm32-dfsdm-adc";
- #io-channel-cells = <1>;
- reg = <5>;
- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 92 0x400 0x01>;
- dma-names = "rx";
+ spi5: spi@44009000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x44009000 0x400>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI5_K>;
+ resets = <&rcc SPI5_R>;
+ dmas = <&dmamux1 85 0x400 0x05>,
+ <&dmamux1 86 0x400 0x05>;
+ dma-names = "rx", "tx";
+ access-controller = <&etzpc 57>;
status = "disabled";
};
- };
- dma1: dma-controller@48000000 {
- compatible = "st,stm32-dma";
- reg = <0x48000000 0x400>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc DMA1>;
- resets = <&rcc DMA1_R>;
- #dma-cells = <4>;
- st,mem2mem;
- dma-requests = <8>;
- };
+ sai1: sai@4400a000 {
+ compatible = "st,stm32h7-sai";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4400a000 0x400>;
+ reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc SAI1_R>;
+ access-controller = <&etzpc 58>;
+ status = "disabled";
+
+ sai1a: audio-controller@4400a004 {
+ #sound-dai-cells = <0>;
+
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x4 0x20>;
+ clocks = <&rcc SAI1_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 87 0x400 0x01>;
+ status = "disabled";
+ };
- dma2: dma-controller@48001000 {
- compatible = "st,stm32-dma";
- reg = <0x48001000 0x400>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc DMA2>;
- resets = <&rcc DMA2_R>;
- #dma-cells = <4>;
- st,mem2mem;
- dma-requests = <8>;
- };
+ sai1b: audio-controller@4400a024 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-b";
+ reg = <0x24 0x20>;
+ clocks = <&rcc SAI1_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 88 0x400 0x01>;
+ status = "disabled";
+ };
+ };
- dmamux1: dma-router@48002000 {
- compatible = "st,stm32h7-dmamux";
- reg = <0x48002000 0x40>;
- #dma-cells = <3>;
- dma-requests = <128>;
- dma-masters = <&dma1 &dma2>;
- dma-channels = <16>;
- clocks = <&rcc DMAMUX>;
- resets = <&rcc DMAMUX_R>;
- };
+ sai2: sai@4400b000 {
+ compatible = "st,stm32h7-sai";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4400b000 0x400>;
+ reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc SAI2_R>;
+ access-controller = <&etzpc 59>;
+ status = "disabled";
+
+ sai2a: audio-controller@4400b004 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x4 0x20>;
+ clocks = <&rcc SAI2_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 89 0x400 0x01>;
+ status = "disabled";
+ };
- adc: adc@48003000 {
- compatible = "st,stm32mp1-adc-core";
- reg = <0x48003000 0x400>;
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc ADC12>, <&rcc ADC12_K>;
- clock-names = "bus", "adc";
- interrupt-controller;
- st,syscfg = <&syscfg>;
- #interrupt-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
+ sai2b: audio-controller@4400b024 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-b";
+ reg = <0x24 0x20>;
+ clocks = <&rcc SAI2_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 90 0x400 0x01>;
+ status = "disabled";
+ };
+ };
- adc1: adc@0 {
- compatible = "st,stm32mp1-adc";
- #io-channel-cells = <1>;
+ sai3: sai@4400c000 {
+ compatible = "st,stm32h7-sai";
#address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0>;
- interrupt-parent = <&adc>;
- interrupts = <0>;
- dmas = <&dmamux1 9 0x400 0x01>;
- dma-names = "rx";
- status = "disabled";
+ #size-cells = <1>;
+ ranges = <0 0x4400c000 0x400>;
+ reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc SAI3_R>;
+ access-controller = <&etzpc 60>;
+ status = "disabled";
+
+ sai3a: audio-controller@4400c004 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x04 0x20>;
+ clocks = <&rcc SAI3_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 113 0x400 0x01>;
+ status = "disabled";
+ };
+
+ sai3b: audio-controller@4400c024 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-b";
+ reg = <0x24 0x20>;
+ clocks = <&rcc SAI3_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 114 0x400 0x01>;
+ status = "disabled";
+ };
};
- adc2: adc@100 {
- compatible = "st,stm32mp1-adc";
- #io-channel-cells = <1>;
+ dfsdm: dfsdm@4400d000 {
+ compatible = "st,stm32mp1-dfsdm";
+ reg = <0x4400d000 0x800>;
+ clocks = <&rcc DFSDM_K>;
+ clock-names = "dfsdm";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x100>;
- interrupt-parent = <&adc>;
- interrupts = <1>;
- dmas = <&dmamux1 10 0x400 0x01>;
- dma-names = "rx";
- nvmem-cells = <&vrefint>;
- nvmem-cell-names = "vrefint";
- status = "disabled";
- channel@13 {
- reg = <13>;
- label = "vrefint";
+ access-controller = <&etzpc 61>;
+ status = "disabled";
+
+ dfsdm0: filter@0 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <0>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 101 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
};
- channel@14 {
- reg = <14>;
- label = "vddcore";
+
+ dfsdm1: filter@1 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <1>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 102 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
};
- };
- };
- sdmmc3: mmc@48004000 {
- compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x00253180>;
- reg = <0x48004000 0x400>;
- interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SDMMC3_K>;
- clock-names = "apb_pclk";
- resets = <&rcc SDMMC3_R>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <120000000>;
- status = "disabled";
- };
+ dfsdm2: filter@2 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <2>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 103 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
- usbotg_hs: usb-otg@49000000 {
- compatible = "st,stm32mp15-hsotg", "snps,dwc2";
- reg = <0x49000000 0x10000>;
- clocks = <&rcc USBO_K>, <&usbphyc>;
- clock-names = "otg", "utmi";
- resets = <&rcc USBO_R>;
- reset-names = "dwc2";
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- g-rx-fifo-size = <512>;
- g-np-tx-fifo-size = <32>;
- g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
- dr_mode = "otg";
- otg-rev = <0x200>;
- usb33d-supply = <&usb33>;
- status = "disabled";
- };
-
- ipcc: mailbox@4c001000 {
- compatible = "st,stm32mp1-ipcc";
- #mbox-cells = <1>;
- reg = <0x4c001000 0x400>;
- st,proc-id = <0>;
- interrupts-extended =
- <&exti 61 1>,
- <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "rx", "tx";
- clocks = <&rcc IPCC>;
- wakeup-source;
- status = "disabled";
- };
-
- dcmi: dcmi@4c006000 {
- compatible = "st,stm32-dcmi";
- reg = <0x4c006000 0x400>;
- interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&rcc CAMITF_R>;
- clocks = <&rcc DCMI>;
- clock-names = "mclk";
- dmas = <&dmamux1 75 0x400 0x01>;
- dma-names = "tx";
- status = "disabled";
- };
-
- rcc: rcc@50000000 {
- compatible = "st,stm32mp1-rcc", "syscon";
- reg = <0x50000000 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
+ dfsdm3: filter@3 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <3>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 104 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
- pwr_regulators: pwr@50001000 {
- compatible = "st,stm32mp1,pwr-reg";
- reg = <0x50001000 0x10>;
+ dfsdm4: filter@4 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <4>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 91 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
- reg11: reg11 {
- regulator-name = "reg11";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
+ dfsdm5: filter@5 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <5>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 92 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
};
- reg18: reg18 {
- regulator-name = "reg18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
+ dma1: dma-controller@48000000 {
+ compatible = "st,stm32-dma";
+ reg = <0x48000000 0x400>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc DMA1>;
+ resets = <&rcc DMA1_R>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ dma-requests = <8>;
+ access-controller = <&etzpc 88>;
+ };
+
+ dma2: dma-controller@48001000 {
+ compatible = "st,stm32-dma";
+ reg = <0x48001000 0x400>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc DMA2>;
+ resets = <&rcc DMA2_R>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ dma-requests = <8>;
+ access-controller = <&etzpc 89>;
+ };
+
+ dmamux1: dma-router@48002000 {
+ compatible = "st,stm32h7-dmamux";
+ reg = <0x48002000 0x40>;
+ #dma-cells = <3>;
+ dma-requests = <128>;
+ dma-masters = <&dma1 &dma2>;
+ dma-channels = <16>;
+ clocks = <&rcc DMAMUX>;
+ resets = <&rcc DMAMUX_R>;
+ access-controller = <&etzpc 90>;
+ };
+
+ adc: adc@48003000 {
+ compatible = "st,stm32mp1-adc-core";
+ reg = <0x48003000 0x400>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc ADC12>, <&rcc ADC12_K>;
+ clock-names = "bus", "adc";
+ interrupt-controller;
+ st,syscfg = <&syscfg>;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controller = <&etzpc 72>;
+ status = "disabled";
+
+ adc1: adc@0 {
+ compatible = "st,stm32mp1-adc";
+ #io-channel-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ interrupt-parent = <&adc>;
+ interrupts = <0>;
+ dmas = <&dmamux1 9 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
- usb33: usb33 {
- regulator-name = "usb33";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ adc2: adc@100 {
+ compatible = "st,stm32mp1-adc";
+ #io-channel-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x100>;
+ interrupt-parent = <&adc>;
+ interrupts = <1>;
+ dmas = <&dmamux1 10 0x400 0x01>;
+ dma-names = "rx";
+ nvmem-cells = <&vrefint>;
+ nvmem-cell-names = "vrefint";
+ status = "disabled";
+ channel@13 {
+ reg = <13>;
+ label = "vrefint";
+ };
+ channel@14 {
+ reg = <14>;
+ label = "vddcore";
+ };
+ };
};
- };
- pwr_mcu: pwr_mcu@50001014 {
- compatible = "st,stm32mp151-pwr-mcu", "syscon";
- reg = <0x50001014 0x4>;
- };
+ sdmmc3: mmc@48004000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00253180>;
+ reg = <0x48004000 0x400>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SDMMC3_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC3_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ access-controller = <&etzpc 86>;
+ status = "disabled";
+ };
+
+ usbotg_hs: usb-otg@49000000 {
+ compatible = "st,stm32mp15-hsotg", "snps,dwc2";
+ reg = <0x49000000 0x10000>;
+ clocks = <&rcc USBO_K>, <&usbphyc>;
+ clock-names = "otg", "utmi";
+ resets = <&rcc USBO_R>;
+ reset-names = "dwc2";
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ g-rx-fifo-size = <512>;
+ g-np-tx-fifo-size = <32>;
+ g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
+ dr_mode = "otg";
+ otg-rev = <0x200>;
+ usb33d-supply = <&usb33>;
+ access-controller = <&etzpc 85>;
+ status = "disabled";
+ };
+
+ dcmi: dcmi@4c006000 {
+ compatible = "st,stm32-dcmi";
+ reg = <0x4c006000 0x400>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc CAMITF_R>;
+ clocks = <&rcc DCMI>;
+ clock-names = "mclk";
+ dmas = <&dmamux1 75 0x400 0x01>;
+ dma-names = "tx";
+ access-controller = <&etzpc 70>;
+ status = "disabled";
+ };
+
+ lptimer2: timer@50021000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50021000 0x400>;
+ interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM2_K>;
+ clock-names = "mux";
+ wakeup-source;
+ access-controller = <&etzpc 64>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
- exti: interrupt-controller@5000d000 {
- compatible = "st,stm32mp1-exti", "syscon";
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x5000d000 0x400>;
- };
+ trigger@1 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
- syscfg: syscon@50020000 {
- compatible = "st,stm32mp157-syscfg", "syscon";
- reg = <0x50020000 0x400>;
- clocks = <&rcc SYSCFG>;
- };
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
+ };
- lptimer2: timer@50021000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-lptimer";
- reg = <0x50021000 0x400>;
- interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM2_K>;
- clock-names = "mux";
- wakeup-source;
- status = "disabled";
+ lptimer3: timer@50022000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50022000 0x400>;
+ interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM3_K>;
+ clock-names = "mux";
+ wakeup-source;
+ access-controller = <&etzpc 65>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
- status = "disabled";
+ trigger@2 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
};
- trigger@1 {
- compatible = "st,stm32-lptimer-trigger";
- reg = <1>;
+ lptimer4: timer@50023000 {
+ compatible = "st,stm32-lptimer";
+ reg = <0x50023000 0x400>;
+ interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM4_K>;
+ clock-names = "mux";
+ wakeup-source;
+ access-controller = <&etzpc 66>;
status = "disabled";
- };
- counter {
- compatible = "st,stm32-lptimer-counter";
- status = "disabled";
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
};
- };
-
- lptimer3: timer@50022000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-lptimer";
- reg = <0x50022000 0x400>;
- interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM3_K>;
- clock-names = "mux";
- wakeup-source;
- status = "disabled";
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
+ lptimer5: timer@50024000 {
+ compatible = "st,stm32-lptimer";
+ reg = <0x50024000 0x400>;
+ interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM5_K>;
+ clock-names = "mux";
+ wakeup-source;
+ access-controller = <&etzpc 67>;
status = "disabled";
- };
- trigger@2 {
- compatible = "st,stm32-lptimer-trigger";
- reg = <2>;
- status = "disabled";
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
};
- };
-
- lptimer4: timer@50023000 {
- compatible = "st,stm32-lptimer";
- reg = <0x50023000 0x400>;
- interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM4_K>;
- clock-names = "mux";
- wakeup-source;
- status = "disabled";
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
+ vrefbuf: vrefbuf@50025000 {
+ compatible = "st,stm32-vrefbuf";
+ reg = <0x50025000 0x8>;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2500000>;
+ clocks = <&rcc VREF>;
+ access-controller = <&etzpc 69>;
status = "disabled";
};
- };
- lptimer5: timer@50024000 {
- compatible = "st,stm32-lptimer";
- reg = <0x50024000 0x400>;
- interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM5_K>;
- clock-names = "mux";
- wakeup-source;
- status = "disabled";
+ sai4: sai@50027000 {
+ compatible = "st,stm32h7-sai";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x50027000 0x400>;
+ reg = <0x50027000 0x4>, <0x500273f0 0x10>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc SAI4_R>;
+ access-controller = <&etzpc 68>;
+ status = "disabled";
+
+ sai4a: audio-controller@50027004 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x04 0x20>;
+ clocks = <&rcc SAI4_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 99 0x400 0x01>;
+ status = "disabled";
+ };
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
- status = "disabled";
+ sai4b: audio-controller@50027024 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-b";
+ reg = <0x24 0x20>;
+ clocks = <&rcc SAI4_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 100 0x400 0x01>;
+ status = "disabled";
+ };
};
- };
- vrefbuf: vrefbuf@50025000 {
- compatible = "st,stm32-vrefbuf";
- reg = <0x50025000 0x8>;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <2500000>;
- clocks = <&rcc VREF>;
- status = "disabled";
- };
-
- sai4: sai@50027000 {
- compatible = "st,stm32h7-sai";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x50027000 0x400>;
- reg = <0x50027000 0x4>, <0x500273f0 0x10>;
- interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&rcc SAI4_R>;
- status = "disabled";
+ hash1: hash@54002000 {
+ compatible = "st,stm32f756-hash";
+ reg = <0x54002000 0x400>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc HASH1>;
+ resets = <&rcc HASH1_R>;
+ dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>;
+ dma-names = "in";
+ dma-maxburst = <2>;
+ access-controller = <&etzpc 8>;
+ status = "disabled";
+ };
+
+ rng1: rng@54003000 {
+ compatible = "st,stm32-rng";
+ reg = <0x54003000 0x400>;
+ clocks = <&rcc RNG1_K>;
+ resets = <&rcc RNG1_R>;
+ access-controller = <&etzpc 7>;
+ status = "okay";
+ };
+
+ fmc: memory-controller@58002000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp1-fmc2-ebi";
+ reg = <0x58002000 0x1000>;
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+ access-controller = <&etzpc 91>;
+ status = "disabled";
+
+ ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+ <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+ <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+ <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+ <4 0 0x80000000 0x10000000>; /* NAND */
+
+ nand-controller@4,0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp1-fmc2-nfc";
+ reg = <4 0x00000000 0x1000>,
+ <4 0x08010000 0x1000>,
+ <4 0x08020000 0x1000>,
+ <4 0x01000000 0x1000>,
+ <4 0x09010000 0x1000>,
+ <4 0x09020000 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
+ <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
+ <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
+ dma-names = "tx", "rx", "ecc";
+ status = "disabled";
+ };
+ };
- sai4a: audio-controller@50027004 {
- #sound-dai-cells = <0>;
- compatible = "st,stm32-sai-sub-a";
- reg = <0x04 0x20>;
- clocks = <&rcc SAI4_K>;
- clock-names = "sai_ck";
- dmas = <&dmamux1 99 0x400 0x01>;
- status = "disabled";
+ qspi: spi@58003000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>,
+ <&mdma1 22 0x2 0x10100008 0x0 0x0>;
+ dma-names = "tx", "rx";
+ clocks = <&rcc QSPI_K>;
+ resets = <&rcc QSPI_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controller = <&etzpc 92>;
+ status = "disabled";
+ };
+
+ ethernet0: ethernet@5800a000 {
+ compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
+ reg = <0x5800a000 0x2000>;
+ reg-names = "stmmaceth";
+ interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clock-names = "stmmaceth",
+ "mac-clk-tx",
+ "mac-clk-rx",
+ "eth-ck",
+ "ptp_ref",
+ "ethstp";
+ clocks = <&rcc ETHMAC>,
+ <&rcc ETHTX>,
+ <&rcc ETHRX>,
+ <&rcc ETHCK_K>,
+ <&rcc ETHPTP_K>,
+ <&rcc ETHSTP>;
+ st,syscon = <&syscfg 0x4>;
+ snps,mixed-burst;
+ snps,pbl = <2>;
+ snps,en-tx-lpi-clockgating;
+ snps,axi-config = <&stmmac_axi_config_0>;
+ snps,tso;
+ access-controller = <&etzpc 94>;
+ status = "disabled";
+
+ stmmac_axi_config_0: stmmac-axi-config {
+ snps,wr_osr_lmt = <0x7>;
+ snps,rd_osr_lmt = <0x7>;
+ snps,blen = <0 0 0 0 16 8 4>;
+ };
};
- sai4b: audio-controller@50027024 {
- #sound-dai-cells = <0>;
- compatible = "st,stm32-sai-sub-b";
- reg = <0x24 0x20>;
- clocks = <&rcc SAI4_K>;
- clock-names = "sai_ck";
- dmas = <&dmamux1 100 0x400 0x01>;
+ usart1: serial@5c000000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x5c000000 0x400>;
+ interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART1_K>;
+ wakeup-source;
+ access-controller = <&etzpc 3>;
status = "disabled";
};
- };
-
- dts: thermal@50028000 {
- compatible = "st,stm32-thermal";
- reg = <0x50028000 0x100>;
- interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc TMPSENS>;
- clock-names = "pclk";
- #thermal-sensor-cells = <0>;
- status = "disabled";
- };
-
- hash1: hash@54002000 {
- compatible = "st,stm32f756-hash";
- reg = <0x54002000 0x400>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc HASH1>;
- resets = <&rcc HASH1_R>;
- dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>;
- dma-names = "in";
- dma-maxburst = <2>;
- status = "disabled";
- };
-
- rng1: rng@54003000 {
- compatible = "st,stm32-rng";
- reg = <0x54003000 0x400>;
- clocks = <&rcc RNG1_K>;
- resets = <&rcc RNG1_R>;
- status = "disabled";
- };
- mdma1: dma-controller@58000000 {
- compatible = "st,stm32h7-mdma";
- reg = <0x58000000 0x1000>;
- interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc MDMA>;
- resets = <&rcc MDMA_R>;
- #dma-cells = <5>;
- dma-channels = <32>;
- dma-requests = <48>;
- };
-
- fmc: memory-controller@58002000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "st,stm32mp1-fmc2-ebi";
- reg = <0x58002000 0x1000>;
- clocks = <&rcc FMC_K>;
- resets = <&rcc FMC_R>;
- status = "disabled";
-
- ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
- <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
- <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
- <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
- <4 0 0x80000000 0x10000000>; /* NAND */
-
- nand-controller@4,0 {
+ spi6: spi@5c001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x5c001000 0x400>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI6_K>;
+ resets = <&rcc SPI6_R>;
+ dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>,
+ <&mdma1 35 0x0 0x40002 0x0 0x0>;
+ access-controller = <&etzpc 4>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c4: i2c@5c002000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x5c002000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C4_K>;
+ resets = <&rcc I2C4_R>;
#address-cells = <1>;
#size-cells = <0>;
- compatible = "st,stm32mp1-fmc2-nfc";
- reg = <4 0x00000000 0x1000>,
- <4 0x08010000 0x1000>,
- <4 0x08020000 0x1000>,
- <4 0x01000000 0x1000>,
- <4 0x09010000 0x1000>,
- <4 0x09020000 0x1000>;
- interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
- <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
- <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
- dma-names = "tx", "rx", "ecc";
+ st,syscfg-fmp = <&syscfg 0x4 0x8>;
+ wakeup-source;
+ i2c-analog-filter;
+ access-controller = <&etzpc 5>;
status = "disabled";
};
- };
-
- qspi: spi@58003000 {
- compatible = "st,stm32f469-qspi";
- reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
- reg-names = "qspi", "qspi_mm";
- interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>,
- <&mdma1 22 0x2 0x10100008 0x0 0x0>;
- dma-names = "tx", "rx";
- clocks = <&rcc QSPI_K>;
- resets = <&rcc QSPI_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- sdmmc1: mmc@58005000 {
- compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x00253180>;
- reg = <0x58005000 0x1000>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SDMMC1_K>;
- clock-names = "apb_pclk";
- resets = <&rcc SDMMC1_R>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <120000000>;
- status = "disabled";
- };
-
- sdmmc2: mmc@58007000 {
- compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x00253180>;
- reg = <0x58007000 0x1000>;
- interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SDMMC2_K>;
- clock-names = "apb_pclk";
- resets = <&rcc SDMMC2_R>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <120000000>;
- status = "disabled";
- };
-
- crc1: crc@58009000 {
- compatible = "st,stm32f7-crc";
- reg = <0x58009000 0x400>;
- clocks = <&rcc CRC1>;
- status = "disabled";
- };
-
- ethernet0: ethernet@5800a000 {
- compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
- reg = <0x5800a000 0x2000>;
- reg-names = "stmmaceth";
- interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- clock-names = "stmmaceth",
- "mac-clk-tx",
- "mac-clk-rx",
- "eth-ck",
- "ptp_ref",
- "ethstp";
- clocks = <&rcc ETHMAC>,
- <&rcc ETHTX>,
- <&rcc ETHRX>,
- <&rcc ETHCK_K>,
- <&rcc ETHPTP_K>,
- <&rcc ETHSTP>;
- st,syscon = <&syscfg 0x4>;
- snps,mixed-burst;
- snps,pbl = <2>;
- snps,en-tx-lpi-clockgating;
- snps,axi-config = <&stmmac_axi_config_0>;
- snps,tso;
- status = "disabled";
-
- stmmac_axi_config_0: stmmac-axi-config {
- snps,wr_osr_lmt = <0x7>;
- snps,rd_osr_lmt = <0x7>;
- snps,blen = <0 0 0 0 16 8 4>;
- };
- };
-
- usbh_ohci: usb@5800c000 {
- compatible = "generic-ohci";
- reg = <0x5800c000 0x1000>;
- clocks = <&usbphyc>, <&rcc USBH>;
- resets = <&rcc USBH_R>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
- usbh_ehci: usb@5800d000 {
- compatible = "generic-ehci";
- reg = <0x5800d000 0x1000>;
- clocks = <&usbphyc>, <&rcc USBH>;
- resets = <&rcc USBH_R>;
- interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- companion = <&usbh_ohci>;
- status = "disabled";
- };
-
- ltdc: display-controller@5a001000 {
- compatible = "st,stm32-ltdc";
- reg = <0x5a001000 0x400>;
- interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LTDC_PX>;
- clock-names = "lcd";
- resets = <&rcc LTDC_R>;
- status = "disabled";
- };
-
- iwdg2: watchdog@5a002000 {
- compatible = "st,stm32mp1-iwdg";
- reg = <0x5a002000 0x400>;
- clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
- clock-names = "pclk", "lsi";
- status = "disabled";
- };
-
- usbphyc: usbphyc@5a006000 {
- #address-cells = <1>;
- #size-cells = <0>;
- #clock-cells = <0>;
- compatible = "st,stm32mp1-usbphyc";
- reg = <0x5a006000 0x1000>;
- clocks = <&rcc USBPHY_K>;
- resets = <&rcc USBPHY_R>;
- vdda1v1-supply = <®11>;
- vdda1v8-supply = <®18>;
- status = "disabled";
-
- usbphyc_port0: usb-phy@0 {
- #phy-cells = <0>;
- reg = <0>;
- };
-
- usbphyc_port1: usb-phy@1 {
- #phy-cells = <1>;
- reg = <1>;
- };
- };
-
- usart1: serial@5c000000 {
- compatible = "st,stm32h7-uart";
- reg = <0x5c000000 0x400>;
- interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc USART1_K>;
- wakeup-source;
- status = "disabled";
- };
-
- spi6: spi@5c001000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32h7-spi";
- reg = <0x5c001000 0x400>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI6_K>;
- resets = <&rcc SPI6_R>;
- dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>,
- <&mdma1 35 0x0 0x40002 0x0 0x0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2c4: i2c@5c002000 {
- compatible = "st,stm32mp15-i2c";
- reg = <0x5c002000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C4_K>;
- resets = <&rcc I2C4_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- st,syscfg-fmp = <&syscfg 0x4 0x8>;
- wakeup-source;
- i2c-analog-filter;
- status = "disabled";
- };
-
- rtc: rtc@5c004000 {
- compatible = "st,stm32mp1-rtc";
- reg = <0x5c004000 0x400>;
- clocks = <&rcc RTCAPB>, <&rcc RTC>;
- clock-names = "pclk", "rtc_ck";
- interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- bsec: efuse@5c005000 {
- compatible = "st,stm32mp15-bsec";
- reg = <0x5c005000 0x400>;
- #address-cells = <1>;
- #size-cells = <1>;
- part_number_otp: part-number-otp@4 {
- reg = <0x4 0x1>;
- };
- vrefint: vrefin-cal@52 {
- reg = <0x52 0x2>;
- };
- ts_cal1: calib@5c {
- reg = <0x5c 0x2>;
- };
- ts_cal2: calib@5e {
- reg = <0x5e 0x2>;
+ i2c6: i2c@5c009000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x5c009000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C6_K>;
+ resets = <&rcc I2C6_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ st,syscfg-fmp = <&syscfg 0x4 0x20>;
+ wakeup-source;
+ i2c-analog-filter;
+ access-controller = <&etzpc 12>;
+ status = "disabled";
};
};
- i2c6: i2c@5c009000 {
- compatible = "st,stm32mp15-i2c";
- reg = <0x5c009000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C6_K>;
- resets = <&rcc I2C6_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- st,syscfg-fmp = <&syscfg 0x4 0x20>;
- wakeup-source;
- i2c-analog-filter;
- status = "disabled";
- };
-
tamp: tamp@5c00a000 {
compatible = "st,stm32-tamp", "syscon", "simple-mfd";
reg = <0x5c00a000 0x400>;
diff --git a/arch/arm/boot/dts/st/stm32mp153.dtsi b/arch/arm/boot/dts/st/stm32mp153.dtsi
index 486084e0b80b..fbabc1a0ed15 100644
--- a/arch/arm/boot/dts/st/stm32mp153.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp153.dtsi
@@ -28,32 +28,34 @@ timer {
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
+};
- soc {
- m_can1: can@4400e000 {
- compatible = "bosch,m_can";
- reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
- reg-names = "m_can", "message_ram";
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "int0", "int1";
- clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
- clock-names = "hclk", "cclk";
- bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
- status = "disabled";
- };
+&etzpc {
+ m_can1: can@4400e000 {
+ compatible = "bosch,m_can";
+ reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+ clock-names = "hclk", "cclk";
+ bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+ access-controller = <&etzpc 62>;
+ status = "disabled";
+ };
- m_can2: can@4400f000 {
- compatible = "bosch,m_can";
- reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
- reg-names = "m_can", "message_ram";
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "int0", "int1";
- clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
- clock-names = "hclk", "cclk";
- bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
- status = "disabled";
- };
+ m_can2: can@4400f000 {
+ compatible = "bosch,m_can";
+ reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+ clock-names = "hclk", "cclk";
+ bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
+ access-controller = <&etzpc 62>;
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/st/stm32mp15xc.dtsi b/arch/arm/boot/dts/st/stm32mp15xc.dtsi
index b06a55a2fa18..f66104c0c023 100644
--- a/arch/arm/boot/dts/st/stm32mp15xc.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xc.dtsi
@@ -4,15 +4,14 @@
* Author: Alexandre Torgue <alexandre.torgue@xxxxxx> for STMicroelectronics.
*/
-/ {
- soc {
- cryp1: cryp@54001000 {
- compatible = "st,stm32mp1-cryp";
- reg = <0x54001000 0x400>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CRYP1>;
- resets = <&rcc CRYP1_R>;
- status = "disabled";
- };
+&etzpc {
+ cryp1: cryp@54001000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54001000 0x400>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ access-controller = <&etzpc 9>;
+ status = "disabled";
};
};
--
2.25.1
[PATCH v5 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [PATCH v5 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
- From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
- Date: Fri, 29 Sep 2023 16:28:51 +0200
- Cc: <linux-crypto@xxxxxxxxxxxxxxx>, <devicetree@xxxxxxxxxxxxxxx>, <linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>, <linux-arm-kernel@xxxxxxxxxxxxxxxxxxx>, <linux-kernel@xxxxxxxxxxxxxxx>, <dmaengine@xxxxxxxxxxxxxxx>, <linux-i2c@xxxxxxxxxxxxxxx>, <linux-iio@xxxxxxxxxxxxxxx>, <alsa-devel@xxxxxxxxxxxxxxxx>, <linux-media@xxxxxxxxxxxxxxx>, <linux-mmc@xxxxxxxxxxxxxxx>, <netdev@xxxxxxxxxxxxxxx>, <linux-phy@xxxxxxxxxxxxxxxxxxx>, <linux-serial@xxxxxxxxxxxxxxx>, <linux-spi@xxxxxxxxxxxxxxx>, <linux-usb@xxxxxxxxxxxxxxx>, Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
- In-reply-to: <20230929142852.578394-1-gatien.chevallier@foss.st.com>
- References: <20230929142852.578394-1-gatien.chevallier@foss.st.com>
- References:
- [PATCH v5 00/11] Introduce STM32 Firewall framework
- From: Gatien Chevallier
- [PATCH v5 00/11] Introduce STM32 Firewall framework
- Prev by Date: [PATCH v5 08/11] arm64: dts: st: add RIFSC as an access controller for STM32MP25x boards
- Next by Date: Patchwork housekeeping for: spi-devel-general
- Previous by thread: [PATCH v5 08/11] arm64: dts: st: add RIFSC as an access controller for STM32MP25x boards
- Index(es):
 |