RE: [PATCH v12 1/4] usb: Add support for Intel LJCA device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andi,

Thanks for your review

> From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
>
> Hi Wentong,
> 
> On Fri, Sep 01, 2023 at 01:36:14PM +0800, Wentong Wu wrote:
> > Implements the USB part of Intel USB-I2C/GPIO/SPI adapter device named
> > "La Jolla Cove Adapter" (LJCA).
> >
> > The communication between the various LJCA module drivers and the
> > hardware will be muxed/demuxed by this driver. Three modules ( I2C,
> > GPIO, and SPI) are supported currently.
> >
> > Each sub-module of LJCA device is identified by type field within the
> > LJCA message header.
> >
> > The sub-modules of LJCA can use ljca_transfer() to issue a transfer
> > between host and hardware. And ljca_register_event_cb is exported to
> > LJCA sub-module drivers for hardware event subscription.
> >
> > The minimum code in ASL that covers this board is Scope
> > (\_SB.PCI0.DWC3.RHUB.HS01)
> >     {
> >         Device (GPIO)
> >         {
> >             Name (_ADR, Zero)
> >             Name (_STA, 0x0F)
> >         }
> >
> >         Device (I2C)
> >         {
> >             Name (_ADR, One)
> >             Name (_STA, 0x0F)
> >         }
> >
> >         Device (SPI)
> >         {
> >             Name (_ADR, 0x02)
> >             Name (_STA, 0x0F)
> >         }
> >     }
> >
> > Signed-off-by: Wentong Wu <wentong.wu@xxxxxxxxx>
> > Reviewed-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
> 
> looks good:
> 
> Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>

Thanks

BR,
Wentong
> 
> Andi




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux