Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be replaced by devm_clk_get_enabled() when driver enables (and possibly prepares) the clocks for the whole lifetime of the device. Moreover, it is no longer necessary to unprepare and disable the clocks explicitly. Signed-off-by: Li Zetao <lizetao1@xxxxxxxxxx> --- drivers/spi/spi-aspeed-smc.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c index 21b0fa646c7d..bbd417c55e7f 100644 --- a/drivers/spi/spi-aspeed-smc.c +++ b/drivers/spi/spi-aspeed-smc.c @@ -748,7 +748,7 @@ static int aspeed_spi_probe(struct platform_device *pdev) aspi->ahb_window_size = resource_size(res); aspi->ahb_base_phy = res->start; - aspi->clk = devm_clk_get(&pdev->dev, NULL); + aspi->clk = devm_clk_get_enabled(&pdev->dev, NULL); if (IS_ERR(aspi->clk)) { dev_err(dev, "missing clock\n"); return PTR_ERR(aspi->clk); @@ -760,12 +760,6 @@ static int aspeed_spi_probe(struct platform_device *pdev) return -EINVAL; } - ret = clk_prepare_enable(aspi->clk); - if (ret) { - dev_err(dev, "can not enable the clock\n"); - return ret; - } - /* IRQ is for DMA, which the driver doesn't support yet */ ctlr->mode_bits = SPI_RX_DUAL | SPI_TX_DUAL | data->mode_bits; @@ -777,14 +771,9 @@ static int aspeed_spi_probe(struct platform_device *pdev) ctlr->dev.of_node = dev->of_node; ret = devm_spi_register_controller(dev, ctlr); - if (ret) { + if (ret) dev_err(&pdev->dev, "spi_register_controller failed\n"); - goto disable_clk; - } - return 0; -disable_clk: - clk_disable_unprepare(aspi->clk); return ret; } @@ -793,7 +782,6 @@ static void aspeed_spi_remove(struct platform_device *pdev) struct aspeed_spi *aspi = platform_get_drvdata(pdev); aspeed_spi_enable(aspi, false); - clk_disable_unprepare(aspi->clk); } /* -- 2.34.1