[PATCH v7 2/6] dt-bindings: mfd: cirrus,cs42l43: Add initial DT binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.

Add a YAML DT binding document for this device.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
---

No changes since v6.

Thanks,
Charles

 .../bindings/sound/cirrus,cs42l43.yaml        | 313 ++++++++++++++++++
 1 file changed, 313 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml

diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml
new file mode 100644
index 0000000000000..7a6de938b11d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml
@@ -0,0 +1,313 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs42l43.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS42L43 Audio CODEC
+
+maintainers:
+  - patches@xxxxxxxxxxxxxxxxxxxxx
+
+description: |
+  The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
+  (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
+  for portable applications. It provides a high dynamic range, stereo
+  DAC for headphone output, two integrated Class D amplifiers for
+  loudspeakers, and two ADCs for wired headset microphone input or
+  stereo line input. PDM inputs are provided for digital microphones.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs42l43
+
+  reg:
+    maxItems: 1
+
+  vdd-p-supply:
+    description:
+      Power supply for the high voltage interface.
+
+  vdd-a-supply:
+    description:
+      Power supply for internal analog circuits.
+
+  vdd-d-supply:
+    description:
+      Power supply for internal digital circuits. Can be internally supplied.
+
+  vdd-io-supply:
+    description:
+      Power supply for external interface and internal digital logic.
+
+  vdd-cp-supply:
+    description:
+      Power supply for the amplifier 3 and 4 charge pump.
+
+  vdd-amp-supply:
+    description:
+      Power supply for amplifier 1 and 2.
+
+  reset-gpios:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: Synchronous audio clock provided on mclk_in.
+
+  clock-names:
+    const: mclk
+
+  cirrus,bias-low:
+    type: boolean
+    description:
+      Select a 1.8V headset micbias rather than 2.8V.
+
+  cirrus,bias-sense-microamp:
+    description:
+      Current at which the headset micbias sense clamp will engage, 0 to
+      disable.
+    enum: [ 0, 14, 23, 41, 50, 60, 68, 86, 95 ]
+    default: 0
+
+  cirrus,bias-ramp-ms:
+    description:
+      Time in milliseconds the hardware allows for the headset micbias to
+      ramp up.
+    enum: [ 10, 40, 90, 170 ]
+    default: 170
+
+  cirrus,detect-us:
+    description:
+      Time in microseconds the type detection will run for. Long values will
+      cause more audible effects, but give more accurate detection.
+    enum: [ 20, 100, 1000, 10000, 50000, 75000, 100000, 200000 ]
+    default: 10000
+
+  cirrus,button-automute:
+    type: boolean
+    description:
+      Enable the hardware automuting of decimator 1 when a headset button is
+      pressed.
+
+  cirrus,buttons-ohms:
+    description:
+      Impedance in Ohms for each headset button, these should be listed in
+      ascending order.
+    minItems: 1
+    maxItems: 6
+
+  cirrus,tip-debounce-ms:
+    description:
+      Software debounce on tip sense triggering in milliseconds.
+    default: 0
+
+  cirrus,tip-invert:
+    type: boolean
+    description:
+      Indicates tip detect polarity, inverted implies open-circuit whilst the
+      jack is inserted.
+
+  cirrus,tip-disable-pullup:
+    type: boolean
+    description:
+      Indicates if the internal pullup on the tip detect should be disabled.
+
+  cirrus,tip-fall-db-ms:
+    description:
+      Time in milliseconds a falling edge on the tip detect should be hardware
+      debounced for. Note the falling edge is considered after the invert.
+    enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ]
+    default: 500
+
+  cirrus,tip-rise-db-ms:
+    description:
+      Time in milliseconds a rising edge on the tip detect should be hardware
+      debounced for. Note the rising edge is considered after the invert.
+    enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ]
+    default: 500
+
+  cirrus,use-ring-sense:
+    type: boolean
+    description:
+      Indicates if the ring sense should be used.
+
+  cirrus,ring-invert:
+    type: boolean
+    description:
+      Indicates ring detect polarity, inverted implies open-circuit whilst the
+      jack is inserted.
+
+  cirrus,ring-disable-pullup:
+    type: boolean
+    description:
+      Indicates if the internal pullup on the ring detect should be disabled.
+
+  cirrus,ring-fall-db-ms:
+    description:
+      Time in milliseconds a falling edge on the ring detect should be hardware
+      debounced for. Note the falling edge is considered after the invert.
+    enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ]
+    default: 500
+
+  cirrus,ring-rise-db-ms:
+    description:
+      Time in milliseconds a rising edge on the ring detect should be hardware
+      debounced for. Note the rising edge is considered after the invert.
+    enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ]
+    default: 500
+
+  pinctrl:
+    type: object
+    $ref: /schemas/pinctrl/pinctrl.yaml#
+    additionalProperties: false
+
+    properties:
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+
+      gpio-ranges:
+        items:
+          - description: A phandle to the CODEC pinctrl node
+            minimum: 0
+          - const: 0
+          - const: 0
+          - const: 3
+
+    patternProperties:
+      "-state$":
+        oneOf:
+          - $ref: "#/$defs/cirrus-cs42l43-state"
+          - patternProperties:
+              "-pins$":
+                $ref: "#/$defs/cirrus-cs42l43-state"
+            additionalProperties: false
+
+  spi:
+    type: object
+    $ref: /schemas/spi/spi-controller.yaml#
+    unevaluatedProperties: false
+
+$defs:
+  cirrus-cs42l43-state:
+    type: object
+
+    allOf:
+      - $ref: /schemas/pinctrl/pincfg-node.yaml#
+      - $ref: /schemas/pinctrl/pinmux-node.yaml#
+
+    oneOf:
+      - required: [ groups ]
+      - required: [ pins ]
+
+    additionalProperties: false
+
+    properties:
+      groups:
+        enum: [ gpio1, gpio2, gpio3, asp, pdmout2, pdmout1, i2c, spi ]
+
+      pins:
+        enum: [ gpio1, gpio2, gpio3,
+                asp_dout, asp_fsync, asp_bclk,
+                pdmout2_clk, pdmout2_data, pdmout1_clk, pdmout1_data,
+                i2c_sda, i2c_scl,
+                spi_miso, spi_sck, spi_ssb ]
+
+      function:
+        enum: [ gpio, spdif, irq, mic-shutter, spk-shutter ]
+
+      drive-strength:
+        description: Set drive strength in mA
+        enum: [ 1, 2, 4, 8, 9, 10, 12, 16 ]
+
+      input-debounce:
+        description: Set input debounce in uS
+        enum: [ 0, 85 ]
+
+required:
+  - compatible
+  - reg
+  - vdd-p-supply
+  - vdd-a-supply
+  - vdd-io-supply
+  - vdd-cp-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cs42l43: codec@1a {
+            compatible = "cirrus,cs42l43";
+            reg = <0x1a>;
+
+            vdd-p-supply = <&vdd5v0>;
+            vdd-a-supply = <&vdd1v8>;
+            vdd-io-supply = <&vdd1v8>;
+            vdd-cp-supply = <&vdd1v8>;
+            vdd-amp-supply = <&vdd5v0>;
+
+            reset-gpios = <&gpio 0>;
+
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupt-parent = <&gpio>;
+            interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+
+            #sound-dai-cells = <1>;
+
+            clocks = <&clks 0>;
+            clock-names = "mclk";
+
+            cs42l43_pins: pinctrl {
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&cs42l43_pins 0 0 3>;
+
+                pinctrl-names = "default";
+                pinctrl-0 = <&pinsettings>;
+
+                pinsettings: default-state {
+                    shutter-pins {
+                        groups = "gpio3";
+                        function = "mic-shutter";
+                    };
+                };
+            };
+
+            spi {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                cs-gpios = <&cs42l43_pins 1 0>;
+
+                sensor@0 {
+                    compatible = "bosch,bme680";
+                    reg = <0>;
+                    spi-max-frequency = <1400000>;
+                };
+            };
+        };
+    };
-- 
2.30.2




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux