[PATCH v2 0/3] Add SPI module for StarFive JH7110 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

This patchset adds initial rudimentary support for the StarFive
SPI controller. And this driver will be used in StarFive's
VisionFive 2 board. The first patch constrain minItems of clocks
for JH7110 SPI and Patch 2 adds support for StarFive JH7110 SPI.

Changes v1->v2:
- Rebaed to v6.5rc1.
- Submitted reference file separately.
- Dropped 'status' node as it was 'okay' by default.
- Dropped Co-developed-by message.

The patch series is based on v6.5rc1.

William Qiu (3):
  dt-bindings: spi: add reference file to YAML
  dt-bindings: spi: constrain minItems of clocks and clock-names
  riscv: dts: starfive: Add spi node for JH7110 SoC

 .../devicetree/bindings/spi/spi-pl022.yaml    | 11 ++-
 .../jh7110-starfive-visionfive-2.dtsi         | 50 ++++++++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      | 98 +++++++++++++++++++
 3 files changed, 156 insertions(+), 3 deletions(-)

--
2.34.1




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux