Re: [PATCH v2 04/15] spi: Replace open coded spi_controller_xfer_timeout()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Il 10/07/23 17:49, Andy Shevchenko ha scritto:
Since the new spi_controller_xfer_timeout() helper appeared,
we may replace open coded variant in spi_transfer_wait().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
  drivers/spi/spi.c       | 25 ++-----------------------
  include/linux/spi/spi.h |  6 +++++-
  2 files changed, 7 insertions(+), 24 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 125dea8fae00..c99ee4164f11 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1342,8 +1342,7 @@ static int spi_transfer_wait(struct spi_controller *ctlr,
  {
  	struct spi_statistics __percpu *statm = ctlr->pcpu_statistics;
  	struct spi_statistics __percpu *stats = msg->spi->pcpu_statistics;
-	u32 speed_hz = xfer->speed_hz;
-	unsigned long long ms;
+	unsigned long ms;
if (spi_controller_is_slave(ctlr)) {
  		if (wait_for_completion_interruptible(&ctlr->xfer_completion)) {
@@ -1351,29 +1350,9 @@ static int spi_transfer_wait(struct spi_controller *ctlr,
  			return -EINTR;
  		}
  	} else {
-		if (!speed_hz)
-			speed_hz = 100000;
-
-		/*
-		 * For each byte we wait for 8 cycles of the SPI clock.
-		 * Since speed is defined in Hz and we want milliseconds,
-		 * use respective multiplier, but before the division,
-		 * otherwise we may get 0 for short transfers.
-		 */
-		ms = 8LL * MSEC_PER_SEC * xfer->len;
-		do_div(ms, speed_hz);
-
-		/*
-		 * Increase it twice and add 200 ms tolerance, use
-		 * predefined maximum in case of overflow.
-		 */
-		ms += ms + 200;
-		if (ms > UINT_MAX)
-			ms = UINT_MAX;
-
+		ms = spi_controller_xfer_timeout(ctlr, xfer);

I agree on using helpers, but the logic is slightly changing here: yes it is
unlikely (and also probably useless) to get ms == UINT_MAX, but the helper is
limiting the maximum timeout value to 500mS, which may not work for some slow
controllers/devices.

This should get validated on more than a few platforms, and I'm not sure that
this kind of validation would be "fast" to get... so, probably the best thing
to do here is to add a warning in case the timeout exceeds 500mS, print the
actual value, keep it like this for a kernel version or two and check reports:
that would allow to understand what a safe maximum timeout value could be.

Aside from that, I wouldn't drop those nice comments explaining how/why the
timeout is calculated: I know how, but not everyone knows in advance.

Regards,
Angelo

  		ms = wait_for_completion_timeout(&ctlr->xfer_completion,
  						 msecs_to_jiffies(ms));
-
  		if (ms == 0) {
  			SPI_STATISTICS_INCREMENT_FIELD(statm, timedout);
  			SPI_STATISTICS_INCREMENT_FIELD(stats, timedout);
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 32c94eae8926..0ce1cb18a076 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -1270,12 +1270,16 @@ static inline bool spi_is_bpw_supported(struct spi_device *spi, u32 bpw)
   * that it would take on a single data line and take twice this amount of time
   * with a minimum of 500ms to avoid false positives on loaded systems.
   *
+ * Assume speed to be 100 kHz if it's not defined at the time of invocation.
+ *
   * Returns: Transfer timeout value in milliseconds.
   */
  static inline unsigned int spi_controller_xfer_timeout(struct spi_controller *ctlr,
  						       struct spi_transfer *xfer)
  {
-	return max(xfer->len * 8 * 2 / (xfer->speed_hz / 1000), 500U);
+	u32 speed_hz = xfer->speed_hz ?: 100000;
+
+	return max(xfer->len * 8 * 2 / (speed_hz / 1000), 500U);
  }
/*---------------------------------------------------------------------------*/




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux