Re: [PATCH 2/5] dt-bindings: serial: geni-qcom: Allow no qup-core icc path

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

On Mon, 03 Jul 2023 15:31:11 +0200, Konrad Dybcio wrote:
> Some SoCs (like SM8150 and SM8250) don't seem to provide a qup-core path.
> Allow such case.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
>  .../bindings/serial/qcom,serial-geni-qcom.yaml     | 26 +++++++++++++++-------
>  1 file changed, 18 insertions(+), 8 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.example.dtb: geniqup@8c0000: serial@a88000: More than one condition true in oneOf schema:
	{'$filename': '/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml',
	 '$id': 'http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#',
	 '$schema': 'http://devicetree.org/meta-schemas/core.yaml#',
	 'allOf': [{'$ref': '/schemas/serial/serial.yaml#'},
	           {'oneOf': [{'required': ['interrupts']},
	                      {'required': ['interrupts-extended']}]}],
	 'oneOf': [{'patternProperties': {'pinctrl-[0-9]+': True},
	            'properties': {'$nodename': True,
	                           'bootph-all': True,
	                           'bootph-pre-ram': True,
	                           'bootph-pre-sram': True,
	                           'bootph-some-ram': True,
	                           'bootph-verify': True,
	                           'interconnect-names': {'items': [{'const': 'qup-config'}],
	                                                  'maxItems': 1,
	                                                  'minItems': 1,
	                                                  'type': 'array'},
	                           'interconnects': {'maxItems': 1,
	                                             'minItems': 1},
	                           'phandle': True,
	                           'pinctrl-names': True,
	                           'secure-status': True,
	                           'status': True}},
	           {'patternProperties': {'pinctrl-[0-9]+': True},
	            'properties': {'$nodename': True,
	                           'bootph-all': True,
	                           'bootph-pre-ram': True,
	                           'bootph-pre-sram': True,
	                           'bootph-some-ram': True,
	                           'bootph-verify': True,
	                           'interconnect-names': {'items': [{'const': 'qup-core'},
	                                                            {'const': 'qup-config'}],
	                                                  'maxItems': 2,
	                                                  'minItems': 2,
	                                                  'type': 'array'},
	                           'interconnects': {'maxItems': 2,
	                                             'minItems': 2},
	                           'phandle': True,
	                           'pinctrl-names': True,
	                           'secure-status': True,
	                           'status': True}}],
	 'properties': {'$nodename': True,
	                'assigned-clock-parents': True,
	                'assigned-clock-rates': True,
	                'assigned-clocks': True,
	                'bootph-all': True,
	                'bootph-pre-ram': True,
	                'bootph-pre-sram': True,
	                'bootph-some-ram': True,
	                'bootph-verify': True,
	                'clock-names': {'items': [{'const': 'se'}],
	                                'maxItems': 1,
	                                'minItems': 1,
	                                'type': 'array'},
	                'clocks': {'maxItems': 1, 'minItems': 1},
	                'compatible': {'items': [{'enum': ['qcom,geni-uart',
	                                                   'qcom,geni-debug-uart']}],
	                               'maxItems': 1,
	                               'minItems': 1,
	                               'type': 'array'},
	                'interrupt-parent': True,
	                'interrupts': {'maxItems': 2,
	                               'minItems': 1,
	                               'type': 'array'},
	                'interrupts-extended': {'maxItems': 2,
	                                        'minItems': 1,
	                                        'type': 'array'},
	                'operating-points-v2': True,
	                'phandle': True,
	                'pinctrl-0': True,
	                'pinctrl-1': True,
	                'pinctrl-names': {'items': [{'const': 'default'},
	                                            {'const': 'sleep'}],
	                                  'maxItems': 2,
	                                  'minItems': 1,
	                                  'type': 'array'},
	                'power-domains': {'maxItems': 1, 'minItems': 1},
	                'reg': {'maxItems': 1, 'minItems': 1},
	                'secure-status': True,
	                'status': True},
	 'required': ['compatible', 'clocks', 'clock-names', 'reg'],
	 'select': {'properties': {'compatible': {'contains': {'enum': ['qcom,geni-debug-uart',
	                                                                'qcom,geni-uart']}}},
	            'required': ['compatible']},
	 'title': 'Qualcomm Geni based QUP UART interface',
	 'type': 'object',
	 'unevaluatedProperties': False}
	from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.example.dtb: serial@a88000: More than one condition true in oneOf schema:
	{'$filename': '/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml',
	 '$id': 'http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#',
	 '$schema': 'http://devicetree.org/meta-schemas/core.yaml#',
	 'allOf': [{'$ref': '/schemas/serial/serial.yaml#'},
	           {'oneOf': [{'required': ['interrupts']},
	                      {'required': ['interrupts-extended']}]}],
	 'oneOf': [{'patternProperties': {'pinctrl-[0-9]+': True},
	            'properties': {'$nodename': True,
	                           'bootph-all': True,
	                           'bootph-pre-ram': True,
	                           'bootph-pre-sram': True,
	                           'bootph-some-ram': True,
	                           'bootph-verify': True,
	                           'interconnect-names': {'items': [{'const': 'qup-config'}],
	                                                  'maxItems': 1,
	                                                  'minItems': 1,
	                                                  'type': 'array'},
	                           'interconnects': {'maxItems': 1,
	                                             'minItems': 1},
	                           'phandle': True,
	                           'pinctrl-names': True,
	                           'secure-status': True,
	                           'status': True}},
	           {'patternProperties': {'pinctrl-[0-9]+': True},
	            'properties': {'$nodename': True,
	                           'bootph-all': True,
	                           'bootph-pre-ram': True,
	                           'bootph-pre-sram': True,
	                           'bootph-some-ram': True,
	                           'bootph-verify': True,
	                           'interconnect-names': {'items': [{'const': 'qup-core'},
	                                                            {'const': 'qup-config'}],
	                                                  'maxItems': 2,
	                                                  'minItems': 2,
	                                                  'type': 'array'},
	                           'interconnects': {'maxItems': 2,
	                                             'minItems': 2},
	                           'phandle': True,
	                           'pinctrl-names': True,
	                           'secure-status': True,
	                           'status': True}}],
	 'properties': {'$nodename': True,
	                'assigned-clock-parents': True,
	                'assigned-clock-rates': True,
	                'assigned-clocks': True,
	                'bootph-all': True,
	                'bootph-pre-ram': True,
	                'bootph-pre-sram': True,
	                'bootph-some-ram': True,
	                'bootph-verify': True,
	                'clock-names': {'items': [{'const': 'se'}],
	                                'maxItems': 1,
	                                'minItems': 1,
	                                'type': 'array'},
	                'clocks': {'maxItems': 1, 'minItems': 1},
	                'compatible': {'items': [{'enum': ['qcom,geni-uart',
	                                                   'qcom,geni-debug-uart']}],
	                               'maxItems': 1,
	                               'minItems': 1,
	                               'type': 'array'},
	                'interrupt-parent': True,
	                'interrupts': {'maxItems': 2,
	                               'minItems': 1,
	                               'type': 'array'},
	                'interrupts-extended': {'maxItems': 2,
	                                        'minItems': 1,
	                                        'type': 'array'},
	                'operating-points-v2': True,
	                'phandle': True,
	                'pinctrl-0': True,
	                'pinctrl-1': True,
	                'pinctrl-names': {'items': [{'const': 'default'},
	                                            {'const': 'sleep'}],
	                                  'maxItems': 2,
	                                  'minItems': 1,
	                                  'type': 'array'},
	                'power-domains': {'maxItems': 1, 'minItems': 1},
	                'reg': {'maxItems': 1, 'minItems': 1},
	                'secure-status': True,
	                'status': True},
	 'required': ['compatible', 'clocks', 'clock-names', 'reg'],
	 'select': {'properties': {'compatible': {'contains': {'enum': ['qcom,geni-debug-uart',
	                                                                'qcom,geni-uart']}}},
	            'required': ['compatible']},
	 'title': 'Qualcomm Geni based QUP UART interface',
	 'type': 'object',
	 'unevaluatedProperties': False}
	from schema $id: http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230703-topic-8250_qup_icc-v1-2-fea39aa07525@xxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux