On 2023/6/19 20:20, Krzysztof Kozlowski wrote: > On 19/06/2023 10:35, William Qiu wrote: >> Add the quad spi controller node for the StarFive JH7110 SoC. >> >> Co-developed-by: Ziv Xu <ziv.xu@xxxxxxxxxxxxxxxx> >> Signed-off-by: Ziv Xu <ziv.xu@xxxxxxxxxxxxxxxx> >> Signed-off-by: William Qiu <william.qiu@xxxxxxxxxxxxxxxx> >> Reviewed-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx> >> --- >> .../jh7110-starfive-visionfive-2.dtsi | 32 +++++++++++++++++++ >> arch/riscv/boot/dts/starfive/jh7110.dtsi | 18 +++++++++++ >> 2 files changed, 50 insertions(+) >> >> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi >> index 2a6d81609284..22212c1150f9 100644 >> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi >> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi >> @@ -126,6 +126,38 @@ &i2c6 { >> status = "okay"; >> }; >> >> +&qspi { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + nor_flash: flash@0 { >> + compatible = "jedec,spi-nor"; >> + reg=<0>; > > Missing spaces. > Will fix. >> + cdns,read-delay = <5>; >> + spi-max-frequency = <12000000>; >> + cdns,tshsl-ns = <1>; >> + cdns,tsd2d-ns = <1>; >> + cdns,tchsh-ns = <1>; >> + cdns,tslch-ns = <1>; >> + >> + partitions { >> + compatible = "fixed-partitions"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + >> + spl@0 { >> + reg = <0x0 0x20000>; >> + }; >> + uboot@100000 { >> + reg = <0x100000 0x300000>; >> + }; >> + data@f00000 { >> + reg = <0xf00000 0x100000>; >> + }; >> + }; >> + }; >> +}; >> + >> &sysgpio { >> i2c0_pins: i2c0-0 { >> i2c-pins { >> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi >> index 4c5fdb905da8..0b24f9e66e67 100644 >> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi >> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi >> @@ -440,6 +440,24 @@ i2c6: i2c@12060000 { >> status = "disabled"; >> }; >> >> + qspi: spi@13010000 { >> + compatible = "starfive,jh7110-qspi", "cdns,qspi-nor"; >> + reg = <0x0 0x13010000 0x0 0x10000 >> + 0x0 0x21000000 0x0 0x400000>; > > This should be two items so <>, <>. Not one item. > > Best regards, > Krzysztof > Will fix. Thanks for taking time to review this patch series. Best reagards William