[PATCH v3 0/4] spi: stm32: add spi device mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



STM32 SPI can operate in device mode.
This series adds this functionnality in spi-stm32 driver.

Since v2:
 - Rename this series: spi device mode

Since v1:
 - Do not add #address-cells and #size-cells in st,stm32-spi.yaml
 - Do not add cs-gpio description in st,stm32-spi.yaml
 - Do not add st,spi-slave-underrun property to handle spi slave underrun

Alain Volmat (3):
  spi: stm32: renaming of spi_master into spi_controller
  spi: stm32: use dmaengine_terminate_{a}sync instead of _all
  dt-bindings: spi: stm32: disable spi-slave property for stm32f4-f7

Valentin Caron (1):
  spi: stm32: introduction of stm32h7 SPI device mode support

 .../devicetree/bindings/spi/st,stm32-spi.yaml |   1 +
 drivers/spi/Kconfig                           |   1 +
 drivers/spi/spi-stm32.c                       | 274 ++++++++++--------
 3 files changed, 161 insertions(+), 115 deletions(-)

-- 
2.25.1




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux