On 2023/6/3 2:02, Conor Dooley wrote: > On Fri, Jun 02, 2023 at 04:49:23PM +0800, William Qiu wrote: >> The QSPI controller needs three clock items to work properly on StarFive >> JH7110 SoC, so there is need to change the maxItems's value to 3. Other >> platforms do not have this constraint. >> >> Signed-off-by: William Qiu <william.qiu@xxxxxxxxxxxxxxxx> >> Reviewed-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx> >> --- >> .../devicetree/bindings/spi/cdns,qspi-nor.yaml | 15 ++++++++++++--- >> 1 file changed, 12 insertions(+), 3 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml >> index b310069762dd..b6a27171d965 100644 >> --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml >> +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml >> @@ -26,6 +26,15 @@ allOf: >> const: starfive,jh7110-qspi >> then: >> properties: >> + clocks: >> + maxItems: 3 >> + >> + clock-names: >> + items: >> + - const: ref_clk > > Aww, I liked Mark's suggestions better. > If you are respinning to fix the LKP reported issue w/ ignoring the result > of enabling the clocks, could you chop the _clk off of this one? > > Otherwise, > Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> > > Thanks, > Conor. Hi Conor, Thanks for taking time to review this patch series. About the clock name, I would take Mark's suggestions, and will update it in next version. Best regards, William