Re: [PATCH v14 6/8] arm64: dts: Add AMD Pensando Elba SoC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 5/15/23 20:16, Brad Larson wrote:

Add AMD Pensando common and Elba SoC specific device nodes

Signed-off-by: Brad Larson <blarson@xxxxxxx>
---

v14 changes:
- Fix dtbs_check l2-cache* property issue by adding required
   cache-level and cache-unified properties
- Observed the issue after updating dtschema from 2023.1 to 2023.4
   and yamllint from 1.26.3 to 1.30.0

v11 changes:
- Delete reset-names
- Fix spi0 compatible to be specific 'amd,pensando-elba-ctrl'

v9 changes:
- Single node for spi0 system-controller and squash
   the reset-controller child into parent

---
  arch/arm64/boot/dts/amd/Makefile              |   1 +
  arch/arm64/boot/dts/amd/elba-16core.dtsi      | 197 ++++++++++++++++++
  arch/arm64/boot/dts/amd/elba-asic-common.dtsi |  80 +++++++
  arch/arm64/boot/dts/amd/elba-asic.dts         |  28 +++
  arch/arm64/boot/dts/amd/elba-flash-parts.dtsi | 106 ++++++++++
  arch/arm64/boot/dts/amd/elba.dtsi             | 191 +++++++++++++++++
  6 files changed, 603 insertions(+)
  create mode 100644 arch/arm64/boot/dts/amd/elba-16core.dtsi
  create mode 100644 arch/arm64/boot/dts/amd/elba-asic-common.dtsi
  create mode 100644 arch/arm64/boot/dts/amd/elba-asic.dts
  create mode 100644 arch/arm64/boot/dts/amd/elba-flash-parts.dtsi
  create mode 100644 arch/arm64/boot/dts/amd/elba.dtsi

diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index 68103a8b0ef5..8502cc2afbc5 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -1,2 +1,3 @@
  # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_PENSANDO) += elba-asic.dtb
  dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
diff --git a/arch/arm64/boot/dts/amd/elba-16core.dtsi b/arch/arm64/boot/dts/amd/elba-16core.dtsi
new file mode 100644
index 000000000000..f9f9f5fd5f69
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/elba-16core.dtsi
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+/*
+ * Copyright 2020-2022 Advanced Micro Devices, Inc.


2023 and the same below.


+ */
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 { cpu = <&cpu0>; };
+				core1 { cpu = <&cpu1>; };
+				core2 { cpu = <&cpu2>; };
+				core3 { cpu = <&cpu3>; };
+			};
+
+			cluster1 {
+				core0 { cpu = <&cpu4>; };
+				core1 { cpu = <&cpu5>; };
+				core2 { cpu = <&cpu6>; };
+				core3 { cpu = <&cpu7>; };
+			};
+
+			cluster2 {
+				core0 { cpu = <&cpu8>; };
+				core1 { cpu = <&cpu9>; };
+				core2 { cpu = <&cpu10>; };
+				core3 { cpu = <&cpu11>; };
+			};
+
+			cluster3 {
+				core0 { cpu = <&cpu12>; };
+				core1 { cpu = <&cpu13>; };
+				core2 { cpu = <&cpu14>; };
+				core3 { cpu = <&cpu15>; };
+			};
+		};
+
+		/* CLUSTER 0 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x0>;


Do you really need 2/0 split here. The first cell is 0 anyway.



+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x1>;
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x2>;
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x3>;
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		/* CLUSTER 1 */
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x100>;
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x101>;
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x102>;
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x103>;
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		/* CLUSTER 2 */
+		cpu8: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x200>;
+			next-level-cache = <&l2_2>;
+			enable-method = "psci";
+		};
+
+		cpu9: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x201>;
+			next-level-cache = <&l2_2>;
+			enable-method = "psci";
+		};
+
+		cpu10: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x202>;
+			next-level-cache = <&l2_2>;
+			enable-method = "psci";
+		};
+
+		cpu11: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x203>;
+			next-level-cache = <&l2_2>;
+			enable-method = "psci";
+		};
+
+		l2_2: l2-cache2 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		/* CLUSTER 3 */
+		cpu12: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x300>;
+			next-level-cache = <&l2_3>;
+			enable-method = "psci";
+		};
+
+		cpu13: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x301>;
+			next-level-cache = <&l2_3>;
+			enable-method = "psci";
+		};
+
+		cpu14: cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x302>;
+			next-level-cache = <&l2_3>;
+			enable-method = "psci";
+		};
+
+		cpu15: cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x303>;
+			next-level-cache = <&l2_3>;
+			enable-method = "psci";
+		};
+
+		l2_3: l2-cache3 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amd/elba-asic-common.dtsi b/arch/arm64/boot/dts/amd/elba-asic-common.dtsi
new file mode 100644
index 000000000000..1a615788f54e
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/elba-asic-common.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+/*
+ * Copyright 2020-2022 Advanced Micro Devices, Inc.
+ */
+
+&ahb_clk {
+	clock-frequency = <400000000>;
+};
+
+&emmc_clk {
+	clock-frequency = <200000000>;
+};
+
+&flash_clk {
+	clock-frequency = <400000000>;
+};
+
+&ref_clk {
+	clock-frequency = <156250000>;
+};
+
+&qspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <2>;
+		m25p,fast-read;
+		cdns,read-delay = <0>;
+		cdns,tshsl-ns = <0>;
+		cdns,tsd2d-ns = <0>;
+		cdns,tchsh-ns = <0>;
+		cdns,tslch-ns = <0>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-hw-reset;
+	resets = <&rstc 0>;
+	status = "okay";
+};
+
+&wdt0 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&spi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	num-cs = <4>;
+	cs-gpios = <0>, <0>, <&porta 1 GPIO_ACTIVE_LOW>,
+		   <&porta 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	rstc: system-controller@0 {
+		compatible = "amd,pensando-elba-ctrl";
+		reg = <0>;
+		spi-max-frequency = <12000000>;
+		interrupt-parent = <&porta>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		#reset-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amd/elba-asic.dts b/arch/arm64/boot/dts/amd/elba-asic.dts
new file mode 100644
index 000000000000..c3f4da2f7449
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/elba-asic.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+/*
+ * Device Tree file for AMD Pensando Elba Board.
+ *
+ * Copyright 2020-2022 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "elba.dtsi"
+#include "elba-16core.dtsi"
+#include "elba-asic-common.dtsi"
+#include "elba-flash-parts.dtsi"
+
+/ {
+	model = "AMD Pensando Elba Board";
+	compatible = "amd,pensando-elba-ortano", "amd,pensando-elba";
+
+	aliases {
+		serial0 = &uart0;
+		spi0 = &spi0;
+		spi1 = &qspi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/amd/elba-flash-parts.dtsi b/arch/arm64/boot/dts/amd/elba-flash-parts.dtsi
new file mode 100644
index 000000000000..734893fef2c3
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/elba-flash-parts.dtsi
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+/*
+ * Copyright 2020-2022 Advanced Micro Devices, Inc.
+ */
+
+&flash0 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "flash";
+			reg = <0x10000 0xfff0000>;


This doesn't fit with partition@0 above.
Also size is weird.



+		};
+
+		partition@f0000 {
+			label = "golduenv";
+			reg = <0xf0000 0x10000>;
+		};
+
+		partition@100000 {
+			label = "boot0";
+			reg = <0x100000 0x80000>;
+		};
+
+		partition@180000 {
+			label = "golduboot";
+			reg = <0x180000 0x200000>;
+		};
+
+		partition@380000 {
+			label = "brdcfg0";
+			reg = <0x380000 0x10000>;
+		};
+
+		partition@390000 {
+			label = "brdcfg1";
+			reg = <0x390000 0x10000>;
+		};
+
+		partition@400000 {
+			label = "goldfw";
+			reg = <0x400000 0x3c00000>;


This size looks weird.


+		};
+
+		partition@4010000 {
+			label = "fwmap";
+			reg = <0x4010000 0x20000>;
+		};
+
+		partition@4030000 {
+			label = "fwsel";
+			reg = <0x4030000 0x20000>;
+		};
+
+		partition@4090000 {
+			label = "bootlog";
+			reg = <0x4090000 0x20000>;
+		};
+
+		partition@40b0000 {
+			label = "panicbuf";
+			reg = <0x40b0000 0x20000>;
+		};
+
+		partition@40d0000 {
+			label = "uservars";
+			reg = <0x40d0000 0x20000>;
+		};
+
+		partition@4200000 {
+			label = "uboota";
+			reg = <0x4200000 0x400000>;
+		};
+
+		partition@4600000 {
+			label = "ubootb";
+			reg = <0x4600000 0x400000>;
+		};
+
+		partition@4a00000 {
+			label = "mainfwa";
+			reg = <0x4a00000 0x1000000>;
+		};
+
+		partition@5a00000 {
+			label = "mainfwb";
+			reg = <0x5a00000 0x1000000>;
+		};
+
+		partition@6a00000 {
+			label = "diaguboot";
+			reg = <0x6a00000 0x400000>;
+		};
+


here is gap


+		partition@8000000 {
+			label = "diagfw";
+			reg = <0x8000000 0x7fe0000>;
+		};
+
+		partition@ffe0000 {
+			label = "ubootenv";
+			reg = <0xffe0000 0x10000>;
+		};


And this is missing space description.

Thanks,
Michal
[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux