Several device tree files get the polarity of the pendown-gpios
wrong: this signal is active low. Fix up all incorrect flags, so
that operating systems can rely on the flag being correctly set.
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
ChangeLog ->v4
- New patch as issue was pointed out by Dmitry. Can be merged
separately.
---
arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 2 +-
arch/arm/boot/dts/at91sam9261ek.dts | 2 +-
arch/arm/boot/dts/imx7d-pico-hobbit.dts | 2 +-
arch/arm/boot/dts/imx7d-sdb.dts | 2 +-
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 2 +-
arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi | 2 +-
arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +-
arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi | 2 +-
arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi | 2 +-
arch/arm/boot/dts/omap3-pandora-common.dtsi | 2 +-
arch/arm/boot/dts/omap5-cm-t54.dts | 2 +-
11 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 2fc9a5d5e0c0..625b9b311b49 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -527,7 +527,7 @@ touchscreen@1 {
interrupt-parent = <&gpio1>;
interrupts = <31 0>;
- pendown-gpio = <&gpio1 31 0>;
+ pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index 88869ca874d1..045cb253f23a 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -156,7 +156,7 @@ tsc2046@2 {
compatible = "ti,ads7843";
interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
spi-max-frequency = <3000000>;
- pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <150>;
ti,x-max = /bits/ 16 <3830>;
diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
index d917dc4f2f22..6ad39dca7009 100644
--- a/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
@@ -64,7 +64,7 @@ ads7846@0 {
interrupt-parent = <&gpio2>;
interrupts = <7 0>;
spi-max-frequency = <1000000>;
- pendown-gpio = <&gpio2 7 0>;
+ pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
vcc-supply = <®_3p3v>;
ti,x-min = /bits/ 16 <0>;
ti,x-max = /bits/ 16 <4095>;
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index f483bc0afe5e..234e5fc647b2 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -205,7 +205,7 @@ tsc2046@0 {
pinctrl-0 = <&pinctrl_tsc2046_pendown>;
interrupt-parent = <&gpio2>;
interrupts = <29 0>;
- pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
touchscreen-max-pressure = <255>;
wakeup-source;
};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index e61b8a2bfb7d..51baedf1603b 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -227,7 +227,7 @@ ads7846@0 {
interrupt-parent = <&gpio2>;
interrupts = <25 0>; /* gpio_57 */
- pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
index 3decc2d78a6c..a7f99ae0c1fe 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
@@ -54,7 +54,7 @@ ads7846@0 {
interrupt-parent = <&gpio1>;
interrupts = <27 0>; /* gpio_27 */
- pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index c595afe4181d..d310b5c7bac3 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -311,7 +311,7 @@ tsc2046@0 {
interrupt-parent = <&gpio1>;
interrupts = <8 0>; /* boot6 / gpio_8 */
spi-max-frequency = <1000000>;
- pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
vcc-supply = <®_vcc3>;
pinctrl-names = "default";
pinctrl-0 = <&tsc2048_pins>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index 1d6e88f99eb3..c3570acc35fa 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -149,7 +149,7 @@ ads7846@0 {
interrupt-parent = <&gpio4>;
interrupts = <18 0>; /* gpio_114 */
- pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index 7e30f9d45790..d95a0e130058 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -160,7 +160,7 @@ ads7846@0 {
interrupt-parent = <&gpio4>;
interrupts = <18 0>; /* gpio_114 */
- pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index 559853764487..4c3b6bab179c 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -651,7 +651,7 @@ tsc2046@0 {
pinctrl-0 = <&penirq_pins>;
interrupt-parent = <&gpio3>;
interrupts = <30 IRQ_TYPE_NONE>; /* GPIO_94 */
- pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio3 30 GPIO_ACTIVE_LOW>;
vcc-supply = <&vaux4>;
ti,x-min = /bits/ 16 <0>;
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index 2d87b9fc230e..af288d63a26a 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -354,7 +354,7 @@ ads7846@0 {
interrupt-parent = <&gpio1>;
interrupts = <15 0>; /* gpio1_wk15 */
- pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
--
2.34.1
[PATCH v4 4/4] ARM: dts: Fix erroneous ADS touchscreen polarities
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [PATCH v4 4/4] ARM: dts: Fix erroneous ADS touchscreen polarities
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Date: Mon, 08 May 2023 23:20:09 +0200
- Cc: linux-omap@xxxxxxxxxxxxxxx, linux-arm-kernel@xxxxxxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx, linux-mips@xxxxxxxxxxxxxxx, linux-input@xxxxxxxxxxxxxxx, linux-spi@xxxxxxxxxxxxxxx, linux-fbdev@xxxxxxxxxxxxxxx, dri-devel@xxxxxxxxxxxxxxxxxxxxx, linux-mmc@xxxxxxxxxxxxxxx, Linus Walleij <linus.walleij@xxxxxxxxxx>
- In-reply-to: <20230430-nokia770-regression-v4-0-9b6dc5536b17@linaro.org>
- References: <20230430-nokia770-regression-v4-0-9b6dc5536b17@linaro.org>
- References:
- [PATCH v4 0/4] Fix up Nokia 770 regression
- From: Linus Walleij
- [PATCH v4 0/4] Fix up Nokia 770 regression
- Prev by Date: [PATCH v4 2/4] ARM/mmc: Convert old mmci-omap to GPIO descriptors
- Next by Date: [PATCH v4 3/4] ARM: omap1: Fix up the Nokia 770 board device IRQs
- Previous by thread: Re: [PATCH v4 2/4] ARM/mmc: Convert old mmci-omap to GPIO descriptors
- Next by thread: [PATCH v4 3/4] ARM: omap1: Fix up the Nokia 770 board device IRQs
- Index(es):
 |