[PATCH] spi: lpspi: run transfer speed_hz sanity check

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Avoid config.speed_hz is 0 when it is a divisor.

Signed-off-by: Han Xu <han.xu@xxxxxxx>
Signed-off-by: Clark Wang <xiaoning.wang@xxxxxxx>
---
 drivers/spi/spi-fsl-lpspi.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 4b70038ceb6b..80f7367095ab 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -303,6 +303,12 @@ static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi)
 
 	perclk_rate = clk_get_rate(fsl_lpspi->clk_per);
 
+	if (!config.speed_hz) {
+		dev_err(fsl_lpspi->dev,
+			"error: the transmission speed provided is 0!\n");
+		return -EINVAL;
+	}
+
 	if (config.speed_hz > perclk_rate / 2) {
 		dev_err(fsl_lpspi->dev,
 		      "per-clk should be at least two times of transfer speed");
-- 
2.34.1




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux