[PATCH v9 1/5] spi: dw: Add 32 bpw support to SPI DW DMA driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add Support for AxSize = 4 bytes configuration from dw dma driver if
n_bytes i.e. number of bytes per write to fifo is 4.

Number of bytes written to fifo per write is depended on the bits/word
configuration being used which the DW core driver translates to n_bytes.
Hence, for bits per word values between 17 and 32 n_bytes should be
equal to 4.

Signed-off-by: Joy Chakraborty <joychakr@xxxxxxxxxx>
Reviewed-by: Serge Semin <fancer.lancer@xxxxxxxxx>
Tested-by: Serge Semin <fancer.lancer@xxxxxxxxx>
* tested on Baikal-T1 based system with DW SPI-looped back interface
transferring a chunk of data with DFS:8,12,16.
---
 drivers/spi/spi-dw-dma.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-dw-dma.c b/drivers/spi/spi-dw-dma.c
index ababb910b391..c1b42cb59965 100644
--- a/drivers/spi/spi-dw-dma.c
+++ b/drivers/spi/spi-dw-dma.c
@@ -208,12 +208,16 @@ static bool dw_spi_can_dma(struct spi_controller *master,
 
 static enum dma_slave_buswidth dw_spi_dma_convert_width(u8 n_bytes)
 {
-	if (n_bytes == 1)
+	switch (n_bytes) {
+	case 1:
 		return DMA_SLAVE_BUSWIDTH_1_BYTE;
-	else if (n_bytes == 2)
+	case 2:
 		return DMA_SLAVE_BUSWIDTH_2_BYTES;
-
-	return DMA_SLAVE_BUSWIDTH_UNDEFINED;
+	case 4:
+		return DMA_SLAVE_BUSWIDTH_4_BYTES;
+	default:
+		return DMA_SLAVE_BUSWIDTH_UNDEFINED;
+	}
 }
 
 static int dw_spi_dma_wait(struct dw_spi *dws, unsigned int len, u32 speed)
-- 
2.40.1.495.gc816e09b53d-goog




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux