Re: [PATCH 16/43] dt-bindings: spi: Add DT bindings ep93xx spi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Apr 24, 2023 at 03:34:32PM +0300, Nikita Shubin wrote:
> Add YAML bindings for ep93xx SoC.
> 
> Signed-off-by: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/spi/spi-ep93xx.yaml   | 68 +++++++++++++++++++
>  1 file changed, 68 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/spi-ep93xx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/spi/spi-ep93xx.yaml b/Documentation/devicetree/bindings/spi/spi-ep93xx.yaml
> new file mode 100644
> index 000000000000..e09ab50629fb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/spi-ep93xx.yaml
> @@ -0,0 +1,68 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spi/spi-ep93xx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: EP93xx SoC SPI controller
> +
> +maintainers:
> +  - Mark Brown <broonie@xxxxxxxxxx>
> +
> +allOf:
> +  - $ref: "spi-controller.yaml#"

Drop quotes.

> +
> +properties:
> +  "#address-cells": true
> +  "#size-cells": true
> +
> +  compatible:
> +    items:
> +      - const: cirrus,ep9301-spi
> +
> +  reg:
> +    items:
> +      - description: SPI registers region
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: SPI Controller reference clock source
> +
> +  clock-names:
> +    items:
> +      - const: ep93xx-spi.0

Does not sound like a clock name... Just drop unless you expect to add 
more clocks.

> +
> +  cs-gpios: true
> +
> +  use_dma:

Don't use '_' in property names. Custom properties need a vendor prefix.

However, this looks like a driver setting rather than h/w config. Why 
not always use DMA or transfers above X size. IOW, let the driver figure 
it out.

> +    type: boolean
> +    items:

'items' is for an array, but this is a boolean.

> +      - description: Flag indicating that the SPI should use dma
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/cirrus,ep93xx-clock.h>
> +    spi0: spi@808a0000 {
> +        compatible = "cirrus,ep9301-spi";
> +        reg = <0x808a0000 0x18>;
> +        interrupt-parent = <&vic1>;
> +        interrupts = <21>;
> +        clocks = <&syscon EP93XX_CLK_SPI>;
> +        clock-names = "ep93xx-spi.0";
> +        cs-gpios = <&gpio5 2 0>;
> +        use_dma;
> +    };
> +
> +...
> -- 
> 2.39.2
> 



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux