Le 01/04/2023 à 11:56, Yinbo Zhu a écrit :
This bus driver supports the Loongson spi hardware controller in the
Loongson platforms and supports to use DTS and PCI framework to
register spi device resources.
Signed-off-by: Yinbo Zhu <zhuyinbo-cXZgJK919ebM1kAEIRd3EQ@xxxxxxxxxxxxxxxx>
---
[...]
+int loongson_spi_init_master(struct device *dev, struct resource *res)
+{
+ struct spi_master *master;
+ struct loongson_spi *spi;
+ struct clk *clk;
+ int ret;
+
+ master = spi_alloc_master(dev, sizeof(struct loongson_spi));
devm_spi_alloc_master()?
(to simplify code and be consistent with devm_ function below)
+ if (master == NULL) {
+ dev_dbg(dev, "master allocation failed\n");
+ return -ENOMEM;
+ }
+
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ master->setup = loongson_spi_setup;
+ master->prepare_message = loongson_spi_prepare_message;
+ master->transfer_one = loongson_spi_transfer_one;
+ master->unprepare_message = loongson_spi_unprepare_message;
+ master->set_cs = loongson_spi_set_cs;
+ master->num_chipselect = 4;
+ master->dev.of_node = of_node_get(dev->of_node);
+ dev_set_drvdata(dev, master);
+
+ spi = spi_master_get_devdata(master);
+
+ spi->master = master;
+
+ spi->base = devm_ioremap(dev, res->start, resource_size(res));
+ if (spi->base == NULL) {
+ dev_err(dev, "cannot map io\n");
+ ret = -ENXIO;
+ goto free_master;
+ }
+
+ clk = devm_clk_get(dev, NULL);
+ if (!IS_ERR(clk))
+ spi->clk_rate = clk_get_rate(clk);
+
+ loongson_spi_reginit(spi);
+
+ spi->mode = 0;
+ if (of_get_property(dev->of_node, "spi-nocs", NULL))
+ spi->mode |= SPI_NO_CS;
+
+ ret = spi_register_master(master);
+ if (ret < 0)
+ goto free_master;
+
+ return ret;
+
+free_master:
+ kfree(master);
+ spi_master_put(master);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(loongson_spi_init_master);
[...]
diff --git a/drivers/spi/spi-loongson-pci.c b/drivers/spi/spi-loongson-pci.c
new file mode 100644
index 000000000000..b811de769ecb
--- /dev/null
+++ b/drivers/spi/spi-loongson-pci.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0+
+// PCI interface driver for Loongson SPI Support
+// Copyright (C) 2023 Loongson Technology Corporation Limited
+
+#include <linux/pci.h>
+
+#include "spi-loongson.h"
+
+static int loongson_spi_pci_register(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int ret;
+ unsigned char v8;
+ struct resource res[2];
+ struct device *dev = &pdev->dev;
+
+ ret = pci_enable_device(pdev);
+ if (ret < 0) {
+ dev_err(dev, "cannot enable pci device\n");
+ goto err_out;
+ }
+
+ ret = pci_request_region(pdev, 0, "loongson-spi io");
+ if (ret < 0) {
+ dev_err(dev, "cannot request region 0.\n");
+ goto err_out;
+ }
+
+ res[0].start = pci_resource_start(pdev, 0);
+ res[0].end = pci_resource_end(pdev, 0);
+ ret = pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &v8);
+
+ if (ret == PCIBIOS_SUCCESSFUL) {
+ res[1].start = v8;
+ res[1].end = v8;
+ }
+
+ ret = loongson_spi_init_master(dev, res);
+ if (ret)
+ dev_err(dev, "failed to initialize master\n");
+
+err_out:
+ return ret;
+}
+
+static void loongson_spi_pci_unregister(struct pci_dev *pdev)
+{
+ pci_release_region(pdev, 0);
pci_disable_device()?
+}
CJ
