[PATCH v5 0/2] spi: loongson: add bus driver for the loongson spi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Loongson platform support spi hardware controller and this series patch
was to add spi driver and binding support.

Change in v2:
		1. This [PATCH v2 1/2] dt-bindings patch need depend on clk patch:
	 	   https://
		   lore.kernel.org/all/20230307115022.12846-1-zhuyinbo@xxxxxxxxxxx/
		2. Remove the clock-names in spi yaml file.
		3. Add "loongson,ls7a-spi" compatible in spi yaml file.
		4. Add an || COMPILE_TEST and drop && PCI then add some CONFIG_PCI
		   macro to limit some pci code.
		5. Make the spi driver top code comment block that use C++ style.
		6. Drop spi->max_speed_hz.
		7. Add a spin_lock for loongson_spi_setup.
		8. Add a timeout and cpu_relax() in loongson_spi_write_read_8bit.
		9. Add spi_transfer_one and drop transfer and rework entire spi
		   driver that include some necessary changes.
		10. Use module_init replace subsys_initcall.
		11. About PM interface that I don't find any issue so I don't add
		    any changes.
Change in v3:
		1. This [PATCH v3 1/2] dt-bindings patch need depend on clk patch:
		   https://
		   lore.kernel.org/all/20230323025229.2971-1-zhuyinbo@xxxxxxxxxxx/
		2. Drop the unused blank line in loongson,ls-spi.yaml file.
		3. Replace clock minItems with clock maxItems in yaml file.
		4. Separate spi driver into platform module, pci module and core
		   module.
		5. Replace DIV_ROUND_UP with DIV_ROUND_UP_ULL to fix compile error
		   "undefined reference to `__aeabi_uldivmod'" and  "__udivdi3 undefined"
		   that reported by test robot.
		6. Remove the spin lock.
		7. Clear the loongson_spi->hz and loongson_spi->mode in setup to fixup
		   the issue that multiple spi device transfer that maybe cause spi was
		   be misconfigured.
Change in v4:
		1. This [PATCH v4 1/2] dt-bindings patch need depend on clk patch:
		   https://
		   lore.kernel.org/all/20230323025229.2971-1-zhuyinbo@xxxxxxxxxxx/
		2. Add "#include <linux/io.h>" in spi-loongson-core.c for fix the compile
		   issue which devm_ioremap no declaration.
		3. Add "EXPORT_SYMBOL_GPL(loongson_spi_dev_pm_ops)" in
		   spi-loongson-core.c for fix the compile issue which
		   loongson_spi_dev_pm_ops undefined.
Change in v5:
		1. Get rid of the clock patch's dependency and open-code the clock IDs.
		2. Fixup checkpatch issue that by installed ply and gitpython package
		   locally, but this series of patch's code doesn't have any change.

Yinbo Zhu (2):
  dt-bindings: spi: add loongson spi
  spi: loongson: add bus driver for the loongson spi controller

 .../bindings/spi/loongson,ls-spi.yaml         |  43 +++
 MAINTAINERS                                   |  10 +
 drivers/spi/Kconfig                           |  31 ++
 drivers/spi/Makefile                          |   3 +
 drivers/spi/spi-loongson-core.c               | 304 ++++++++++++++++++
 drivers/spi/spi-loongson-pci.c                |  89 +++++
 drivers/spi/spi-loongson-plat.c               |  66 ++++
 drivers/spi/spi-loongson.h                    |  41 +++
 8 files changed, 587 insertions(+)

-- 
2.20.1




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux