[Patch V4 3/3] spi: tegra210-quad: set half duplex flag

[Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>]

Tegra QSPI controller only supports half duplex transfers.
Set half duplex constrain flag.

Signed-off-by: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
---
 drivers/spi/spi-tegra210-quad.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-tegra210-quad.c b/drivers/spi/spi-tegra210-quad.c
index 39dec2dc161b..fe15fa6eecd1 100644
--- a/drivers/spi/spi-tegra210-quad.c
+++ b/drivers/spi/spi-tegra210-quad.c
@@ -1553,6 +1553,7 @@ static int tegra_qspi_probe(struct platform_device *pdev)
 	master->mode_bits = SPI_MODE_0 | SPI_MODE_3 | SPI_CS_HIGH |
 			    SPI_TX_DUAL | SPI_RX_DUAL | SPI_TX_QUAD | SPI_RX_QUAD;
 	master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) | SPI_BPW_MASK(8);
+	master->flags = SPI_CONTROLLER_HALF_DUPLEX;
 	master->setup = tegra_qspi_setup;
 	master->transfer_one_message = tegra_qspi_transfer_one_message;
 	master->num_chipselect = 1;
-- 
2.17.1