Re: [PATCH 2/5] gpio: Add support for Intel LJCA USB GPIO driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ye,

thanks for your patch!

I think your colleague Andy Shevchenko will provide the most detailed
and deep feedback, but here are some things I spotted immediately:

On Sun, Feb 19, 2023 at 7:31 PM Ye Xiang <xiang.ye@xxxxxxxxx> wrote:

> This patch implements the GPIO function of Intel USB-I2C/GPIO/SPI adapter
> device named "La Jolla Cove Adapter" (LJCA). It communicate with LJCA
> GPIO module with specific protocol through interfaces exported by LJCA USB
> driver.
>
> Signed-off-by: Ye Xiang <xiang.ye@xxxxxxxxx>
(...)

> +config GPIO_LJCA
> +       tristate "INTEL La Jolla Cove Adapter GPIO support"
> +       depends on MFD_LJCA

I would add

   default MFD_LJCA

so if you activate the MFD you get this subdriver by default
as module or built-in depending on what the MFD is built
as.

(Same goes for the other subdrivers I guess)

In addition you need:

select GPIOLIB_IRQCHIP

since you use this facility.

> +static struct irq_chip ljca_gpio_irqchip = {

static const ...

> +       .name = "ljca-irq",
> +       .irq_mask = ljca_irq_mask,
> +       .irq_unmask = ljca_irq_unmask,
> +       .irq_set_type = ljca_irq_set_type,
> +       .irq_bus_lock = ljca_irq_bus_lock,
> +       .irq_bus_sync_unlock = ljca_irq_bus_unlock,
> +       .flags = IRQCHIP_IMMUTABLE,
> +       GPIOCHIP_IRQ_RESOURCE_HELPERS,
> +};

Yours,
Linus Walleij



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux