Hi Mika,
Am 2023-02-07 15:03, schrieb Mika Westerberg:
On Tue, Feb 07, 2023 at 02:52:54PM +0100, Michael Walle wrote:
> Modern CPUs exposes this controller as PCI device that only uses
> hardware sequencing capabilities which is safer than software
> sequencing.
> Leave the platform driver as *DANGEROUS* and update help text since
> most of these controllers are using software sequencing.
Out of curiosity, what is hardware sequencing? Maybe this should
be explained a bit more in the Kconfig help text. Looks like the
dangerous was there because you can update the bios and that
could eventually lead to a bricked mainboard. So hardware
sequencing helps there? how?
Hardware sequencing means the controller exposes just a bunch of "high
level" operations to the software.
Ok, I figured it would have been something to do with the SPI driver
just supporting these high level ops. But even with that background
it was hard to connect that to the "hardware sequencing". The help
text should be somewhat understandable to the user/distro
people/whoever,
right? So I'd suggest to explain that a bit more in detail, or don't
use the term hardware sequencing at all. I'm not sure.
Such as read, write, erase and so on
but does not allow running the actual "low level" SPI-NOR opcodes.
Software sequencing on the other hand allows running pretty much any
opcode and this is what caused problems for certain Lenovo laptops few
years back that then resulted adding DANGEROUS to the Kconfig.
That information should go into the commit message.
Typically the flash is locked by the BIOS so ordinary users cannot
really overwrite it, even by accident.
I see, thanks for the explanation!
-michael
