[PATCH v2] spi: dw: Fix wrong FIFO level setting for long xfers

[Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>]

Due to using the u16 type in the min_t() macros the SPI transfer length
will be cast to word before participating in the conditional statement
implied by the macro. Thus if the transfer length is greater than 64KB the
Tx/Rx FIFO threshold level value will be determined by the leftover of the
truncated after the type-case length. In the worst case it will cause the
dramatical performance drop due to the "Tx FIFO Empty" or "Rx FIFO Full"
interrupts triggered on each xfer word sent/received to/from the bus.

The problem can be easily fixed by specifying the unsigned int type in the
min_t() macros thus preventing the possible data loss.

Fixes: ea11370fffdf ("spi: dw: get TX level without an additional variable")
Reported-by: Sergey Nazarov <Sergey.Nazarov@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>

---

Changelog v2:
- Use min_t(unisgned int, ...) macros instead of just min(). (@Andy)
---
 drivers/spi/spi-dw-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
index 99edddf9958b..c3bfb6c84cab 100644
--- a/drivers/spi/spi-dw-core.c
+++ b/drivers/spi/spi-dw-core.c
@@ -366,7 +366,7 @@ static void dw_spi_irq_setup(struct dw_spi *dws)
 	 * will be adjusted at the final stage of the IRQ-based SPI transfer
 	 * execution so not to lose the leftover of the incoming data.
 	 */
-	level = min_t(u16, dws->fifo_len / 2, dws->tx_len);
+	level = min_t(unsigned int, dws->fifo_len / 2, dws->tx_len);
 	dw_writel(dws, DW_SPI_TXFTLR, level);
 	dw_writel(dws, DW_SPI_RXFTLR, level - 1);
 
-- 
2.39.0