[PATCH v2 0/3] SPI core CS delay fixes and additions

[Hector Martin <marcan@xxxxxxxxx>]

Commits f6c911f3308c ("spi: dt-bindings: Introduce
spi-cs-setup-ns property") and 33a2fde5f77b ("spi: Introduce
spi-cs-setup-ns property") introduced a new property to represent the
CS setup delay in the device tree, but they have some issues:

- The property is only parsed as a 16-bit integer number of nanoseconds,
  which limits the maximum value to ~65us. This is not a reasonable
  upper limit, as some devices might need a lot more.
- The property name is inconsistent with other delay properties, which
  use a "*-delay-ns" naming scheme.
- Only the setup delay is introduced, but not the related hold and
  inactive delay times.

This series fixes the issues and adds support for the two missing
properties. Please pull in the first 3 patches as fixes for 6.2, to
avoid introducing a problematic DT API in this release. The last two
patches can wait until 6.3, though are probably harmless to throw in
as fixes too, since they're trivial.

v2: Removed a stray variable declaration that was triggering a warning,
and dropped the first two patches which have already been applied.

Janne Grunau (3):
  spi: Use a 32-bit DT property for spi-cs-setup-delay-ns
  spi: dt-bindings: Add hold/inactive CS delay peripheral properties
  spi: Parse hold/inactive CS delay values from the DT

 .../bindings/spi/spi-peripheral-props.yaml    | 10 ++++++++
 drivers/spi/spi.c                             | 25 +++++++++++++++----
 2 files changed, 30 insertions(+), 5 deletions(-)

--
2.35.1