Re: [PATCH 02/16] dt-bindings: spi: Add bcmbca-hsspi controller support

[Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>]

On 06/01/2023 21:07, William Zhang wrote:
> The new Broadcom Broadband BCMBCA SoCs includes a updated HSSPI
> controller. Add a new compatible string and required fields for the new
> driver.  Also add myself and Kursad as the maintainers.
> 
> Signed-off-by: William Zhang <william.zhang@xxxxxxxxxxxx>
> ---
> 
>  .../bindings/spi/brcm,bcm63xx-hsspi.yaml      | 84 +++++++++++++++++--
>  1 file changed, 78 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm63xx-hsspi.yaml b/Documentation/devicetree/bindings/spi/brcm,bcm63xx-hsspi.yaml
> index 45f1417b1213..56e69d4a1faf 100644
> --- a/Documentation/devicetree/bindings/spi/brcm,bcm63xx-hsspi.yaml
> +++ b/Documentation/devicetree/bindings/spi/brcm,bcm63xx-hsspi.yaml
> @@ -4,22 +4,51 @@
>  $id: http://devicetree.org/schemas/spi/brcm,bcm63xx-hsspi.yaml#
>  $schema: http://devicetree.org/meta-schemas/core.yaml#
>  
> -title: Broadcom BCM6328 High Speed SPI controller
> +title: Broadcom Broadband SoC High Speed SPI controller
>  
>  maintainers:
> +

Drop blank line.

> +  - William Zhang <william.zhang@xxxxxxxxxxxx>
> +  - Kursad Oney <kursad.oney@xxxxxxxxxxxx>
>    - Jonas Gorski <jonas.gorski@xxxxxxxxx>

>  
> +description: |
> +  Broadcom Broadband SoC supports High Speed SPI master controller since the
> +  early MIPS based chips such as BCM6328 and BCM63268.  This controller was
> +  carried over to recent ARM based chips, such as BCM63138, BCM4908 and BCM6858.
> +
> +  It has a limitation that can not keep the chip select line active between
> +  the SPI transfers within the same SPI message. This can terminate the
> +  transaction to some SPI devices prematurely. The issue can be worked around by
> +  either the controller's prepend mode or using the dummy chip select
> +  workaround. This controller uses the compatible string brcm,bcm6328-hsspi.
> +
> +  The newer SoCs such as BCM6756, BCM4912 and BCM6855 include an updated SPI
> +  controller that add the capability to allow the driver to control chip select
> +  explicitly. This solves the issue in the old controller. This new controller
> +  uses the compatible string brcm,bcmbca-hsspi.
> +
>  properties:
>    compatible:
> -    const: brcm,bcm6328-hsspi
> +    enum:
> +      - brcm,bcm6328-hsspi
> +      - brcm,bcmbca-hsspi

bca seems quite unspecific. Your description above mentions several
model numbers and "bca" is not listed as model. Compatibles cannot be
generic.

>  
>    reg:
> -    maxItems: 1
> +    items:
> +      - description: main registers
> +      - description: miscellaneous control registers
> +    minItems: 1
> +
> +  reg-names:
> +    items:
> +      - const: hsspi
> +      - const: spim-ctrl

This does not match reg

>  
>    clocks:
>      items:
> -      - description: spi master reference clock
> -      - description: spi master pll clock
> +      - description: SPI master reference clock
> +      - description: SPI master pll clock

Really? You just added it in previous patch, didn't you?

>  
>    clock-names:
>      items:
> @@ -29,12 +58,43 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> +  brcm,use-cs-workaround:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: |
> +      Enable dummy chip select workaround for SPI transfers that can not be
> +      supported by the default controller's prepend mode, i.e. delay or cs
> +      change needed between SPI transfers.

You need to describe what is the workaround.

> +
>  required:
>    - compatible
>    - reg
>    - clocks
>    - clock-names
> -  - interrupts
> +
> +allOf:
> +  - $ref: "spi-controller.yaml#"

No quotes. How this is related to this patch?

> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - brcm,bcm6328-hsspi
> +    then:
> +      properties:
> +        reg:
> +          minItems: 1

Drop.

reg-names now do not match.

> +          maxItems: 1
> +    else:
> +      properties:
> +        reg:
> +          minItems: 2
> +          maxItems: 2
> +        reg-names:
> +          minItems: 2
> +          maxItems: 2
> +        brcm,use-cs-workaround: false
> +      required:
> +        - reg-names
Best regards,
Krzysztof