[PATCH 0/2] spi: cqspi: Fix register reads in STIG Mode

[Dhruva Gole <d-gole@xxxxxx>]

Intent of these patches is to fix register reads in STIG mode and also
use STIG mode while reading flash registers.
Currently if you try to read a register while in STIG mode there is no
support for ADDR and thus naturally a register never gets read from the
flash.

Logs demonstrating the usage and working of QSPI-NOR Flash (Cypress
s25hs512t) on a modified AM625 SK EVM can be found on the link below:
https://gist.github.com/DhruvaG2000/a9b90d3d9c60edd3b2d8a360d869a00b

A series very similar to this was also sent to u-boot and the latest
revision can be viewed here:
[PATCH V4 0/2] spi: cqspi: Fix register reads in STIG Mode
https://lore.kernel.org/u-boot/20230103063112.1165898-1-d-gole@xxxxxx/


Dhruva Gole (2):
  spi: cadence-quadspi: setup ADDR Bits in cmd reads
  spi: cadence-quadspi: use STIG mode for small reads

 drivers/spi/spi-cadence-quadspi.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

-- 
2.25.1