Re: [PATCH 1/8] spi: dt-bindings: Introduce spi-cs-setup-ns property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 18.11.2022 17:30, Mark Brown wrote:
On Fri, Nov 18, 2022 at 03:14:58PM +0100, Michael Walle wrote:
From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>

+  spi-cs-setup-ns:
+    description:
+      Delay in nanosecods to be introduced by the controller after CS is
+      asserted.

Does this need a type as the spi-cs-setup-ns is apparently just 16bit? At
least the driver uses it that way.

But IMHO this should just be a normal uint32 value to be consistent with
all the other properties. Also the max value with 16bit will be 'just'
65us.

Making it 32 bit does seem safer.  I've applied the series

Thanks. There are few implications to consider before making this prop a
u32, and I'd like to check them with you.

struct spi_delay will have to be updated to have a u32 value, now it's a
u16. This means that we'll have to update spi_delay_to_ns() to either
return a s64 or to add a u64 *delay parameter to the function so that we
can still handle the conversions from usecs and the error codes in the
SPI_DELAY_UNIT_SCK case. Then all its callers have to be updated to
consider the u64 delay.

I don't know what to say, I'm in between. 65us delays are improbable,
but I'm fine to update this as well. Let me know your preference.

Thanks,
ta



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux