Currently the SPI PXA2xx devices on Intel platforms can be instantiated via the following paths: 1) as ACPI LPSS device on Haswell, Bay Trail and Cherry Trail; 2) as ACPI LPSS device on the Sky Lake and newer; 3) as PCI LPSS device on Haswell, Bay Trail and Cherry Trail; 4) as PCI LPSS device on the Sky Lake and newer; 5) as PCI device via ID table. Each of these cases provides some platform related data differently, i.e.: 1) via drivers/acpi/acpi_lpss.c and drivers/spi/spi-pxa2xx.c 2) via drivers/mfd/intel-lpss-acpi.c 3) via drivers/spi/spi-pxa2xx-pci.c 4) via drivers/mfd/intel-lpss-pci.c and drivers/spi/spi-pxa2xx.c 5) via drivers/spi/spi-pxa2xx-pci.c This approach has two downsides: a) there is no data propagated in the case #2 because we can't have two or more drivers to match the same ACPI ID and hence some cases are still not supported (Sky Lake and newer ACPI enabled LPSS); b) the data is duplicated over two drivers in the cases #1 & #4 and, besides to be a bloatware, it is error prone (e.g. Lakefield has a wrong data right now due to missed PCI entry in the spi-pxa2xx.c). This series fixes the downsides, and enables previously unsupported cases. On top of that it has a couple of cleanups (patches 4 and 5). Changelog v4: - apply the property only for known MFD enumerated devices (Mark) Changelog v3: - added tags to patches 4 & 5 (Jonathan) - massaged cover letter Changelog v2: - added cover letter (Mark) - dropped applied patch Andy Shevchenko (5): spi: pxa2xx: Respect Intel SSP type given by a property spi: pxa2xx: Remove no more needed PCI ID table spi: pxa2xx: Move OF and ACPI ID tables closer to their user spi: pxa2xx: Consistently use dev variable in pxa2xx_spi_init_pdata() spi: pxa2xx: Switch from PM ifdeffery to pm_ptr() drivers/spi/spi-pxa2xx.c | 186 ++++++++----------------------------- include/linux/pxa2xx_ssp.h | 1 + 2 files changed, 41 insertions(+), 146 deletions(-) -- 2.35.1