[PATCH] spi/panel: dt-bindings: drop 3-wire from common properties

[Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>]

The spi-3wire property is device specific and should be accepted only if
device really needs them.  Drop it from common spi-peripheral-props.yaml
schema, mention in few panel drivers which use it and include instead in
the SPI controller bindings.  The controller bindings will provide
spi-3wire type validation and one place for description.  Each device
schema must list the property if it is applicable.

The Samsung S6E63M0 panel uses also spi-cpha/cpol properties on at least
one board (ste-ux500-samsung-janice/dts), so add also these to the
panel's bindings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 .../bindings/display/panel/kingdisplay,kd035g6-54nt.yaml     | 2 ++
 .../bindings/display/panel/leadtek,ltk035c5444t.yaml         | 2 ++
 .../devicetree/bindings/display/panel/samsung,s6e63m0.yaml   | 4 ++++
 Documentation/devicetree/bindings/spi/spi-controller.yaml    | 5 +++++
 .../devicetree/bindings/spi/spi-peripheral-props.yaml        | 5 -----
 5 files changed, 13 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
index 2a2756d19681..b4be9bd8ddde 100644
--- a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
+++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
@@ -23,6 +23,8 @@ properties:
   reg: true
   reset-gpios: true
 
+  spi-3wire: true
+
 required:
   - compatible
   - power-supply
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml
index 817a9bed7d5a..ebdca5f5a001 100644
--- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml
@@ -24,6 +24,8 @@ properties:
   reg: true
   reset-gpios: true
 
+  spi-3wire: true
+
 required:
   - compatible
   - power-supply
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
index 940f7f88526f..6f1fc7469f07 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
@@ -24,6 +24,10 @@ properties:
   default-brightness: true
   max-brightness: true
 
+  spi-3wire: true
+  spi-cpha: true
+  spi-cpol: true
+
   vdd3-supply:
     description: VDD regulator
 
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index 655713fba7e2..01042a7f382e 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -96,6 +96,11 @@ patternProperties:
     $ref: spi-peripheral-props.yaml
 
     properties:
+      spi-3wire:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The device requires 3-wire mode.
+
       spi-cpha:
         $ref: /schemas/types.yaml#/definitions/flag
         description:
diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
index ce048e782e80..4beeb9e17694 100644
--- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
@@ -29,11 +29,6 @@ properties:
     description:
       Chip select used by the device.
 
-  spi-3wire:
-    $ref: /schemas/types.yaml#/definitions/flag
-    description:
-      The device requires 3-wire mode.
-
   spi-cs-high:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
-- 
2.34.1