No problem!!! I forget to tell them. It’s okay though! 👌👍 😚😚😚😚😚😚😚😚😚😚😚😚😚😚☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️ I’m blushing! Last night was fun. > On Jul 23, 2022, at 9:30 PM, Vanessa Page <Vebpe@xxxxxxxxxxx> wrote: > > 🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😚😍😚😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍 > > Omg thank you Janika! > > I’m glad to see everything is okay just tell them next time! > > Love ya babes! > >> On Jul 23, 2022, at 9:27 PM, Zhou Yanjie <zhouyanjie@xxxxxxxxxxxxxx> wrote: >> >> Hi Tomasz, >> >>>> On 2022/7/23 下午10:47, Tomasz Maciej Nowak wrote: >>> W dniu 22.07.2022 o 18:48, 周琰杰 (Zhou Yanjie) pisze: >>>> 1.Use the spi-mem poll status APIs in SPI-NOR to reduce CPU load. >>>> 2.Add SFC support for the X1000 SoC, the X1600 SoC, and the X2000 SoC from Ingenic. >>>> >>>> Liu Jinghui and Aidan MacDonald provided a lot of assistance during the development of this driver. >>>> >>>> 周琰杰 (Zhou Yanjie) (3): >>>> mtd: spi-nor: Use the spi-mem poll status APIs. >>>> dt-bindings: SPI: Add Ingenic SFC bindings. >>>> SPI: Ingenic: Add SFC support for Ingenic SoCs. >>>> >>>> .../devicetree/bindings/spi/ingenic,sfc.yaml | 64 ++ >>>> drivers/mtd/spi-nor/core.c | 42 +- >>>> drivers/spi/Kconfig | 9 + >>>> drivers/spi/Makefile | 1 + >>>> drivers/spi/spi-ingenic-sfc.c | 662 +++++++++++++++++++++ >>>> 5 files changed, 768 insertions(+), 10 deletions(-) >>>> create mode 100644 Documentation/devicetree/bindings/spi/ingenic,sfc.yaml >>>> create mode 100755 drivers/spi/spi-ingenic-sfc.c >>>> >>> Even tough it's still early in revision process, I'll add my >>> Tested-by: Tomasz Maciej Nowak <tmn505@xxxxxxxxx> >>> >>> The test was performed with Damai DM6291A SoC which is a Ingenic X1000 IP >>> but with 256 MiB RAM. No bugs yet observed on my side. >> >> >> Thanks for you test! >> >> >>> >> >> ______________________________________________________ >> Linux MTD discussion mailing list >> http://lists.infradead.org/mailman/listinfo/linux-mtd/